加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

Stability and Nonlinear Deformation of Cylindrical Grids

The general stability of single-layer cylindrical grids is studied in linear and nonlinear formulations. Dependence of the general buckling load on the geometry and stiffness parameters of a grid is established in an analytical form. Such grids are numerically analyzed for stability. It is established that the general buckling load is much less than the local buckling load. Typical general buckling modes are found. It is shown that such grids are weakly sensitive to imperfections     

替代柱面透镜的二元光学元件设计

在二极管泵浦固体激光器耦合光学系统中，柱面透镜起着非常重要的作用。随着系统轻量化、小型化的要求需要用重量轻、尺寸小的光学器件来替代。本文介绍一种用于替代柱面透镜的二元光学元件的设计和制作方法。     

共振原子蒸气中激光脉冲的时空特性

在柱对称条件下，利用耦合的布洛赫－麦克斯韦方程，研究了激光脉冲在原子蒸气介质中的共振传播。考察了脉中在时空中的演化。数值计算结果表明激光脉冲在传播中，由于自感应透明与光波的衍射效应，表现出复杂的相干现象。     

激光标线的原理和实验

根据几何光学知识分析了激光标线原理.理论和实验表明:激光标线长度与激光光束形状、光学元件形状及材料折射率有关.并讨论了激光标线向两侧扩展的原因.     

Identification of nonstationary axisymmetric load distributed along a cylindrical shell

The paper outlines a procedure to identify the space-and time-dependent external nonstationary load acting on a closed circular cylindrical shell of medium thickness. Time-dependent deflections at several points of the shell are used as input data to solve the inverse problem. Examples of numerical identification of various nonstationary loads, including moving ones are presented. The relationship between the external load and the stress-strain state of the shell is described by the Volterra equation of the first kind. The identification problem is solved using Tikhonov's regularization method and Apartsin's h-regularization method __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 91–100, July 2008.     

叠层连续开口圆柱壳的精确解

抛弃任何有关位移和应力模式的假设，引入δ-函数，对正变异性连续开口圆柱壳建立状态方程．给出薄的、中厚的和强厚的叠层连续开口圆柱壳静力问题的统一的精确解．数值结果和SAPS解进行了对比．     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

腔靶X射线辐射对称特性实验观测

在“神光”装置上用两种特殊结构的实验靶型,通过两个不同方位的诊断孔观测腔内壁Ｘ光再辐射的空间能谱结构和Ｘ光辐射总量,分别研究了与激光第一打击面完全对称和不对称的腔内壁（两个被观测位置相差９０°）Ｘ光辐射能谱和辐射能量的对称性,并对测量结果进行了简要的分析讨论．     

Flow-injection analysis with a small cylindrical wire type electrode

An amperometric detector with a small thin mercury film electrode is described. The device demonstrates advantageous operational characteristics such as small dispersion (D<2) and “memory effect” (me<0.6%), extensive maximum sample frequency (msf −200 samples/h), and high sensitivity. It has been proven useful in flow-injection analysis at a constant potential under hydrodynamic conditions.