Separation of 23 dansylated amino acids by micellar electrokinetic chromatography at low temperature

Summary The baseline separation of 23 dansylated amino acids (including 3 didansylated species) is reported. Lowering of the analysis temperature and fine control of the surfactant concentration were essential in obtaining this result. Calibration graphs with good linearity were obtained.     

Establishment of Illuminance Scale at UME with an Accurately Calibrated Radiometer

Traceability in illuminance measurements at the National Metrology Institute of Turkey (TüBITAK-UME) was established in 2003 with a detector-based realization. The new measurement technique was developed for the determination of illuminance responsivity and upgrating of the illuminance scale. The unit of the illuminance responsivity, in A/lx, was measured with an expanded uncertainty of 0.2% (k = 2) by supplying using the developed scanning technique for the calculation of color correction factor. The surface of a radiometer was scanned using a double-monochromator facility upgraded with an x-y scanning system. The illuminance responsivity as a function of bandpass and temperature were also investigated in this study. To use a radiometer in the photometric applications of metrology, a light-sensitive device, a so-called trap detector, was characterized by measuring the absolute responsivity, the non-linearity, and spatial non-uniformity.     

Two new asterosaponins from the starfish Asterias rubens: application of a cryogenic NMR probe head

We report two new asterosaponins from the Baltic starfish Asterias rubens along with their ¹H and ¹³C NMR data. The compounds were isolated after on‐flow liquid chromatography–NMR–mass spectrometry screening indicated that they had not been identified before. The one‐ and two‐dimensional NMR experiments used to elucidate the structures were recorded using a 5 mm cryogenic probe head. The advantages of cryogenic probes for this kind of examination in comparison with conventional probe heads are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

pH,Definition and measurement at high temperatures

In this review paper, the NBS scale and its limitations are briefly discussed. The magnitude of liquid junction potentials and some calculated values are presented. The use of a molality scale for hydrogen electrode concentration cells at high temperatures is described, and results from measurements on ionization equilibria are summarized. Use of this scale is also recommended for certain circumstances with cells without liquid junction. As an alternative activity scale, use of the Pitzer ion-interaction treatment for ions is recommended for special cases. Finally, reference data are presented for _±HCl in HCl(aq) to 350°C and (HCl+NaCl)(aq) to 200°C that were derived by use of the Pitzer ion-interaction treatment.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Thermotropic copolyamides from triethyleneglycol bis (4-carboxyphenyl) ether,aromatic diamines,and p-aminobenzoic acid

It is proposed that depression of the transition temperatures, especially the melting point (T_m), can be achieved by the introduction of a different amide bond structure into the copolyamides of dicarboxylic acids and diamines by copolymerization of aminocarboxylic acids, such as p-aminobenzoic acid. The effect was examined by the amount and distribution of the structure in the copolylamindes. Copolycondensations of PEG₃, p-aminobenzoic acid, and diamines with different chain lengths showed that the structural change of the amide bond in the copolymers, especially its distribution, was more important than its total amount in them. Several types of aminocarboxylic acids were briefly examined to study the effect. © 1994 John Wiley & Sons, Inc.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Superoxes,high temperature universal phases in (GC)2

Most of the common classes of organic compounds chromatograph normally on Superoxes. There is no tailing or adverse effect from excessively different activity different activity coefficients. Superoxes are therefore universal phases for gas chromatography. This is also expressed by a wide useful temperature range from ～50° to ～300°. High MW Superox-4 has a MAOT about 20° higher than the lower MW Superox-0.1. Several applications illustrating the versatility of Superox phases in (GC)² are presented.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.