Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

沸石上萘的催化破环反应

沸石上萘的催化破环反应朱建华刘琳胡玉海曹洁明须沁华（南京大学化学化工学院化学系，南京２１００９３）关键词沸石催化剂，ＨＭＳ中孔分子筛，萘，多环芳烃，催化裂解，环境保护分类号Ｏ６４３／Ｘ５当前，治理大工业生产带来的环境污染已经成为全球关注的课题，也是...     

碳化钨负载S2O8^2-/ZrO2固体超强酸催化剂上的正戊烷反应研究

首次研究了碳化钨负载S2 O2 -8 ZrO2 (PSZ)固体超强酸催化剂 (WC PSZ)上正戊烷的反应情况及影响催化剂活性的各种因素 ,并用GC MS ,XRD ,BET等手段分析了正戊烷反应产物和催化剂的物理化学性质等 .结果表明 :WC PSZ对正戊烷具有异构化和裂解的双重催化作用 .PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高 ,显示出优于Pt PSZ催化剂的效果 ,碳化钨的负载量为 2 0 %的效果最佳 .适当的焙烧、活化和反应温度等条件是取得良好反应效果的关键     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．     

催化裂化汽油脱硫添加剂USY/ZnO/Al2O3的性能评价

 在固定流化床催化裂化装置上，以减压蜡油为原料，对制备的U\r\nSY／ZnO／Al2O3催化裂化汽油脱硫添加剂的性能进行了评价．结果表明\r\n，随着添加剂添加量和剂油比的增加，生成汽油的硫含量降低．在500\r\n℃和剂油比为5的条件下，在FCC平衡催化剂中添加30％的添加剂时，汽\r\n油的硫含量可由不加添加剂时的1230μg／g降低到770μg／g左右．添\r\n加剂的添加量（10％）较低时，对催化裂化产物的分布基本没有影响；\r\n添加30％的添加剂时，焦炭的产率有所增加，但汽油收率基本不变．X\r\nRD表征结果表明，USY／ZnO／Al2O3添加剂中的ZnO对USY的晶相结构有\r\n一定的破坏作用，但随着反应与再生次数的增多，ZnO与Al2O3之间形成\r\n较为稳定的锌铝尖晶石结构，使添加剂的性能趋于稳定．     

以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

吸热碳氢燃料裂解镧改性混合型催化剂的研究

制备了吸热型碳氢燃料NNJ-150和镧离子交换改性的USY、ZSM-5分子重申及混合分子筛，考察了NNJ-150在USHY、HZSM-5和两者混合物以及镧改性单分子筛和混合分子筛催化剂上的裂解反应。结果表明，ZSM-5分子筛中添加镧，对NNJ-150的单分子裂解反应有明显影响；混合分子两种分子筛之间存在协同作用，低温（500℃）下，LaUSY LaZSM-5（75：25）混合分子筛对低碳烯烃的选择性较高（41.48％），催化剂寿命较长（35min以上），能有效提高吸热型碳氢燃料NNJ-150的吸热能效。     

Properties and Characterization of Modified HZSM—5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673K were investigated.The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desortion (TPD) of ammonia.The structure of the samples was characterized by XRD,and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy(SEM).The XRD results show that the modified samples have no novel crystalline phase,indicating a high dispersion of phosphorus and boron species.After treatment,the microporous volume and surface area of the samples markedly decrease,implying the bolockage of the channel.The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type Ⅰ and Ⅳ，and all hysteresis loops resemble the H4-type in the IUPAC classification.The total acidity of the modified samples,determined by pyrldine adsorption IR and TPD of ammonia,decreases in contrast to that of the parent HZSM-5.The conversion of n-heptane over P and B steammodified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.     

煤油共处理油品的族组成研究

采用高效液相色谱法对兖州烟煤与催化裂化油浆共处理制备的油品的族组成进行了研究。结果表明 ,在实验条件下油品主要由烷烃和芳烃组成 ,杂原子化合物含量一般仅为 0 5 %～ 2 0 %。原料煤与油浆比例、反应温度、催化剂对油品族组成具有重要影响 ;随初始氢压不同 ,对油品族组成的影响不同 ;在 4MPa初始压力条件下 ,反应气氛 (氢气、氮气 )对煤油共处理和纯油浆制备油品的族组成影响不大。     

The combined effect of photodegradation and stress cracking in polystyrene

This work aims to analyze the effects of photodegradation on the stress cracking resistance of polystyrene. Injection moulded samples were exposed to the ultraviolet light for various times in the laboratory prior to solvent contact. The bars were then stressed in a tensile testing machine under the presence of butanol. During this period the stress relaxation was monitored and the ultimate properties were evaluated after selected periods of stress cracking. Complementary tests were done by size exclusion chromatography and by scanning electron microscopy. The results indicated that butanol causes significant modification in polystyrene, with extensive surface crazing as well as reduction in mechanical properties. This is intensified under higher mechanical stress. The previous degraded samples showed a higher level of stress relaxation and a greater loss in tensile strength in comparison to the undegraded ones. The synergist action of photodegradation and stress cracking in polystyrene may be a consequence of the chemical changes caused by oxidation like the formation of polar chemical groups and the reduction in molecular weight.