Rocky coast processes: with special reference to the recession of soft rock cliffs

Substantial progress in research on the recession of coastal cliffs composed of soft materials has been made in recent years and data with higher accuracy have been accumulated. This paper provides the state of the art review in the recession studies and highlights two new findings obtained from the reanalysis of existing data. The review topics are: episodic and localized nature of cliff recession; the development of cliffline; the relationship between cliff height and recession rate; mechanisms of cliff toe erosion by waves; a fundamental equation for wave-induced toe erosion; factors controlling toe erosion; and slope instabilities and mass movements. The findings are presented on (1) the temporal change in cliffline recession mode and (2) the effect of beach sediment at the cliff base on the cliff erosion.     

关于NA情况下重对数律收敛速度的一般形式

研究了NA序列重对数律收敛速度的一般形式，把Davis和Gut的结果推广到了NA的情形，并使梁汉营等人关于对数律一个结果成为特例；作为推论，得到了关于NA序列重对数律收敛速度的充分条件．     

修饰态布居的选择性激发对无反转激光的作用

以三能级V型系统为例研究修饰态布居的选择性激发对无反转激光增益的作用. 当非 相干驱动场的频谱宽度远小于驱动场产生的修饰态能级的间距时，非相干驱动场只将一个修 饰态的布居抽运至激发态. 借助原子的衰减通道，系统中形成单向布居转移通道，从而建立 修饰态布居的选择性激发. 利用修饰态布居的选择性激发，可以摆脱裸态共振无反转激光的 三个限制: (1) 不再要求辅助的低频驱动跃迁比高频激光跃迁具有更高的衰减速率；(2) 显 著降低非相干激发速率的阈值；(3) 无反转激光的线性增益不再反比于相干驱动场的强 关键词： 修饰态布居的选择性激发 无反转激光增益 原子衰减速率 非相干激发阈值速率     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

On the convergence rate and optimization of a numerical method with splitting of boundary conditions for the stokes system in a spherical layer in the axisymmetric case: Modification for thick layers

The convergence rate of a fast-converging second-order accurate iterative method with splitting of boundary conditions constructed by the authors for solving an axisymmetric Dirichlet boundary value problem for the Stokes system in a spherical gap is studied numerically. For R/r exceeding about 30, where r and R are the radii of the inner and outer boundary spheres, it is established that the convergence rate of the method is lower (and considerably lower for large R/r) than the convergence rate of its differential version. For this reason, a really simpler, more slowly converging modification of the original method is constructed on the differential level and a finite-element implementation of this modification is built. Numerical experiments have revealed that this modification has the same convergence rate as its differential counterpart for R/r of up to 5 × 10³. When the multigrid method is used to solve the split and auxiliary boundary value problems arising at iterations, the modification is more efficient than the original method starting from R/r ～ 30 and is considerably more efficient for large values of R/r. It is also established that the convergence rates of both methods depend little on the stretching coefficient η of circularly rectangular mesh cells in a range of η that is well sufficient for effective use of the multigrid method for arbitrary values of R/r smaller than ～ 5 × 10³.     

The origin of the formation of cavities in galvanized coatings

The role of water‐soluble corrosion products on galvanized wires was examined. The samples used were industrial hot‐dip galvanized wires, which were exposed to the open air under all weather conditions for a relatively short time (6 and 12 months), in an urban environment close to the sea. The samples were studied by different methods, i.e. scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and optical microscopy (OM). Several phases were detected because of the galvanization procedure and the steel substrate. Furthermore, phases which were formed as a result of the reaction of zinc with the atmosphere were also detected. These were oxides like ZnO, carbonates like ZnCO₃ and hydrated Zn and Fe sulfates. Their presence influences the corrosion resistance of the wires, which finally, strongly depends on the solubility of the wires in water. The SO₄^2? compounds especially are very soluble and consequently are easily removed from the coating surface, leading to its degradation by the formation of cavities. In any case, their presence, even after a short period of exposure, implies that the coating is highly affected by the atmosphere of the modern city. Copyright © 2006 John Wiley & Sons, Ltd.     

条件泛函及其导数非参数估计的强一致收敛速度

研究了条件泛函及其导数的非参数估计,对随机与固定设计的条件泛函,分别利用核估计和非参数加权估计,在核函数及权函数满足一定条件下,证明了估计一致强收敛于待估函数的速度可达到最优。从而进一步推广和发展了Hrdle,etal.(1988)、Severini,etal.(1992)的许多结果。     

Surface-enhanced Raman scattering study of polymer on metals. III. Chemisorbed polybenzimidazole and its corrosion-inhibiting properties at high temperature

Chemisorption of polybenzimidazole on silver and copper etched with nitric acid has been observed by surface-enhanced Raman scattering (SERS). The polymer is found to react chemically with silver, forming a complexed film on the surface. The SERS spectra show that polybenzimidazole film inhibits oxidation of the metal at high temperature, unlike chemisorbed benzimidazole, benzotriazole, and poly(4-vinyl pyridine). © 1992 John Wiley & Sons, Inc.