Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Character of the thermal motion of water molecules according to the data on quasielastic incoherent scattering of slow neutrons

The paper discusses the applicability of quasi-crystalline approximation to describing the thermal motion of water molecules in their normal and supercooled states. The problem is subjected to the critical analysis of experimental data on incoherent scattering of slow neutrons based on theories developed by Singwi-Sjolander [1] and Oskotsky [2] modified to duly take into account the limited applicability range of diffusion approximation. The applicability conditions of quasi-crystalline approximation are shown to be consistently satisfied only when water is in supercooled state and within a narrow temperature range above the melting temperature.     

High-order accurate equations describing vibrations of thin bars

A method for deriving one-dimensional wave propagation equations in thin inhomogeneous anisotropic bars based on the mathematical homogenization theory for periodic media is used to obtain equations governing the longitudinal and transverse vibrations of a homogeneous circular bar. The equations are derived up to O(ε⁸) terms and take into account variable body forces and surface loads. Here, ε is the ratio of the bar’s typical thickness to the typical wavelength.     

从立方抛物线谈起(1)--余弦型振动,椭圆余弦型振动与双曲线型非周期运动

从立方抛物线的特性谈起 ,用较初浅的方法 ,借助于雅可比椭圆函数求椭圆方程的解来说明一大类一维保守系统的余弦振动、椭圆余弦型振动与双曲线型非周期运动 .并以杜芬振子、单摆、倒摆、转动圆环上的小环运动为典型实例作了详细讨论     

双奇核136La的集体带结构

通过重离子核反应与在束γ谱的实验技术, 对A=130缺中子核区的双奇核¹³⁶La的高自旋态进行了研究, 所用核反应为¹³⁰Te(¹¹B,5n). 实验结果扩展了¹³⁶La的能级纲图, 包括3个集体转动带, 最高自旋态达20h. 对于\uppi h_{11/2}\otimes \upnu h_{11/2}$~带, 观测到了旋称反转与集体回弯现象. 通过系统学比较, 对旋称反转特性进行了讨论. 由推转壳模型的计算指出, 此集体回弯是由一对中子的角动量顺排引起的. 另外两个集体带为具有~$\gamma\approx -60^\circ$~的扁椭形变带, 其可能的组态为: $\uppi h_{11/2}\otimes \upnu g_{7/2}h_{11/2}^2$~与~$\uppi g_{7/2}\otimes\upnu g_{7/2}^2 d_{5/2} h_{11/2}^2$.     

Electronic properties of model quantum-dot structures in zero and finite magnetic fields

We have computed electronic structures and total energies of circularly confined two-dimensional quantum dots and their lateral dimers in zero and finite uniform external magnetic fields using different theoretical schemes: the spin-density-functional theory (SDFT), the current-and-spin-density-functional theory (CSDFT), and the variational quantum Monte Carlo (VMC) method. The SDFT and CSDFT calculations employ a recently-developed, symmetry-unrestricted real-space algorithm allowing solutions which break the spin symmetry. Results obtained for a six-electron dot in the weak confinement limit and in zero magnetic field as well as in a moderate confinement and in finite magnetic fields enable us to draw conclusions about the reliability of the more approximative SDFT and CSDFT schemes in comparison with the VMC method. The same is true for results obtained for the two-electron quantum dot dimer as a function of inter-dot distance. The structure and role of the symmetry-breaking solutions appearing in the SDFT and CSDFT calculations for the above systems are discussed. Received 16 October 2001 and Received in final form 17 January 2002     

Natural vibrations of a strip made of a composite material with a locally curved structure

The possibility of using the finite-element method for investigating two-dimensional problems on natural vibrations in the mechanics of composite materials with curved structures is considered. With the example of a hinge-supported strip made of a composite material with a locally curved structure, the influence of geometrical and mechanical parameters of the strip on its eigenfrequencies is examined. It is established that the presence of local curving in the structure of strip material decreases the magnitude of eigenfrequencies.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 71–78, January–February, 2005.     

Relation between the Hydrodynamic and Elastic Parameters in Surface Wave Diffraction on a Floating Plate

The problem of surface wave diffraction on a floating elastic plate is considered. The relation between the parameters of the elastic vibrations of the plate and the transmitted and reflected wave amplitudes is investigated. It is shown that the maximum amplitudes of the plate stresses and deflections depend nonmonotonically on the incident wave frequency and are reached simultaneously with the maxima of both the transmission coefficient and the length of the wave penetrating into the plate. This makes it possible to use the transmission coefficient as a parameter for investigating the maximum and minimum amplitudes of the hydroelastic vibrations of the plate. As an example, this criterion is used to minimize the vibrations of a plate whose leading edge is elastically connected to the bottom.     

锂锰尖晶石红外光谱的研究

本文对锂锰尖晶石的红外光谱进行了研究。由于锂锰尖晶石的晶体结构属于Fd3m空间群,锂离子占据四面体空隙(8a位置),锰离子占据八面体空隙(16d位置)。根据群论的知识,对锂锰尖晶石晶体中离子的振动方式与红外活性之间的内在关系进行了讨论。并列出了锂锰尖晶石的红外光谱实验数据。通过理论分析,我们推断:位于618.6和501.5cm~(-1)的红外吸收带分别来源于Mn(Ⅳ)-O和Mn(Ⅲ)-O键在晶体中的不对称伸缩振动(单元为Mn(Ⅳ)O_6和Mn(Ⅲ)O_6八面体),位于1124cm~(-1)的弱红外吸收带来源于Li-O键的不对称伸缩(单元为LiO_4四面体)。还有一些低于400cm~(-1)的可能吸收带在400～4000cm~(-1)范围内未能检测到。这一结论的可靠性通过锂锰尖晶石和掺杂的锂锰尖晶石的红外光谱实验数据得到证实。     

Electronic spectra of cationic forms of meso-tetrapropylporphin in a nanoporous silicate gel matrix

We have studied the fluorescence and fluorescence excitation spectra at 300 K, 77 K, and 4.2 K for silicate gel matrices colored with meso-tetrapropylporphin by impregnation of the matrix with a solution of the pigment. Comparison of the data obtained with the absorption spectra in acidified solutions and analysis of the low-temperature fine-structure vibronic spectra, and also taking into account data obtained earlier for octaethylporphin in a xerogel showed formation of two cationic forms of meso-tetrapropylporphin in the gel matrix: the short-wavelength form has a dicationic structure, while the long-wavelength form has a monocationic structure. We have traced out the correlations of the vibrational structure in the spectra of the dicationic form with data for the porphin dication, and we have drawn a number of conclusions concerning the normal vibrational modes that are active in the vibronic fluorescence and absorption spectra of the studied cationic forms. Using the AM1 semiempirical quantum chemical method, we optimized the geometry of the mesotetrapropylporphin dication: the most stable of the possible conformers is the dication structure with saddleshaped macrocycle nonplanarity. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 453–461, July–August, 2006.