Decreasing the Displacements of a Composite Saddle-Shaped Cable Roof

The structural possibilities of decreasing the compliance of a composite saddle-shaped cable roof having a compliant support contour are investigated. The use of a supporting contour consisting of cables joined together with tie-bars is considered as a structural method enabling one to decrease the compliance of the roof. Each cable of the support has its own initial flexure. The method is most efficient from the viewpoint of material consumption per unit of covered area relative to the increasing rigidity and prestress level of the cable net.The efficiency of the method was evaluated by a numerical experiment, which was carried out for a composite saddle-shaped cable roof 50 × 50 m in the plan. The roof was formed by two orthogonal cable groups joined with a compliant supporting contour. A hybrid composite cable based on a carbon-fiber-reinforced plastic, a glass-fiber-reinforced plastic, and steel was considered as a material for the cable net in combination with steel. The material consumption and the maximum vertical displacement of the cable net in relation to the initial geometrical characteristics of the supporting contour were obtained. A possibility of decreasing the maximum vertical displacements of the roof by 8% was established.     

同轴双无衍射光的理论与实验

提出同轴双无衍射光的概念。如果两束汇聚角略有不同的同轴无衍射光同时存在，则它们相互之间叠加干涉后产生一种纵向呈周期变化的光场结构，这是一种新的光束空间分布，这种光束在横向仍是一种同心环光斑，可用于精密对准。而在不同纵向位置，这些同心环的强度分布是不同的，且是周期性变化的。同轴双无衍射光的轴向周期性可用于沿光束传播方向的定位。文中提出了双环缝法、分段圆锥透镜法、正弦相位环光栅法等实现同轴双无衍射光的理论与实验方法，分析了同轴双无衍射光的横向与纵向传播的衍射光斑特性，理论计算与实验测量的结果基本相符合。     

Efficiency Enhancement of Coaxial-Cavity Electron Cyclotron Resonance Maser by Tapering Guide Magnetic Field

A coaxial-cavity cyclotron resonance maser (CRM) oscillator with tapered guide magnetic field is proposed. It is shown that the transmission quality can be improved by tapering the guide magnetic field. Simulation indicates that the efficiency of a millimeter-wave gyrotron oscillator may be reached up to 38.7% by optimizing the tapered magnetic field.     

Spectral Domain Analysis of Coaxial Cavities

Coaxial cavities are used in high power gyrotrons as the beam-wave interaction structure. Much research has been devoted to their mode selective properties. A coaxial cavity lacks a sharp boundary at its open end, so it has some physical features that can only be observed using a spectral model, such as frequency-dependent field profiles and mode overlapping effects. These properties are important since cold tests are usually conducted in the frequency domain. This study applies the incident/reflected wave boundary condition to the wave equation of a weakly irregular coaxial waveguide. The resistivity of the wall is considered in the analysis. Calculations reveal that the fixed-position spectrum yields an uncertain resonant frequency and quality factor. Although the maximum-field spectrum can uniquely determine the properties of the coaxial cavity, the resonant frequency obtained using the maximum-field spectral model is inconsistent with that obtained using the temporal model. The field-energy spectrum explains the low Q nature of the coaxial cavity. Moreover, resonant frequencies evaluated using the field-energy spectrum agree precisely with those evaluated using the temporal model.     

Transient vibrations of a tau inclined cable with a riding accelerating mass

The objective of this paper is a theoretical and numerical study of the dynamics of a taut inclined cable with a riding accolerating mass, which is suspended from two points of different elevation. The moving mass is a trolley that is accelerated by a solid fuel rocket down the inclined cable and is aerodynamically brought to a halt. The thrust of the rocket is tangential to the deformed configuration of the cable.Methods of analysis consist of the dynamics of small deformations superimposed on the static catenary state. The problem is nonlinear due to presence of friction and the convective acceleration interaction of the moving mass and the cable. Galerkin's procedure for removal of spatial dependence and numerical integration are used to obtain convergent solutions.Deceased     

Alternating-current losses in two-layer superconducting cables consisting of second-generation superconductors coated by U-shaped ferromagnetic materials

Alternating-current losses in a two-layer superconducting cable, each layer being composed of 15 closely-spaced rectangular wires made up of second-generation superconductors when the ends of wires are coated by either a non-magnetic or strong ferromagnetic material having a U profile is numerically investigated. Computations are carried out through the finite-element method. The alternating-current losses do not increase significantly if the relative permeability of the coating is increased three orders of magnitude, provided that the current amplitude is less than half of the critical current in a superconducting wire. However, the losses are much higher for ferromagnetic coating if the amplitude of the applied current oscillating at 50 Hz is close to the critical current. The ferromagnetic coating is seen to accumulate the magnetic field lines normally on its surfaces, while the field lines are parallel to the long axes of the wires, leading to more significant flux penetration in the coated regions. This facilitates a uniform low-loss current flow in the uncoated regions of the wires. In contrast, coating with a non-magnetic material gives rise to a considerably smaller current flow in the uncoated regions, whereas the low-loss flow is maintained in the coated regions. Moreover, the current flows in opposite directions in the coated and uncoated regions, where the direction in each region is converse for the two materials.     

Influence of saddle-splay deformation on lyotropic chromonic liquid crystals confined between two coaxial cylinders

ABSTRACT

A striking feature of lyotropic chromonic liquid crystals confined in cylinder model exhibit double-twist director configurations. Evidence suggests that saddle-splay deformation is among the most important factors for the distortions of director. Previous researches limit the director to distort at a fixed plane (r-? plane) by using specific boundary conditions such as degenerate planar anchoring condition. In this work, we consider lyotropic chromonic liquid crystals confined between two coaxial cylinders with free-surface boundary conditions and Rapini-Papoular-type anchoring conditions. By using finite-difference iterative method to solve the numerical solution of Euler equation, we find that saddle-splay deformation leads to double-twist director configurations under free-surface boundary conditions, which consist of the result under degenerate planar anchoring conditions. Furthermore, at Rapini-Papoular-type anchoring conditions, saddle-splay deformation has a great influence on the director in the radial direction (r direction) and the director distorts in three-dimensional space. Remarkably, our method provides a more accurate theory basis for the measured values of saddle-splay elastic constant K_24。     

Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。     

两共轴带电圆环的相互作用能和作用力

计算了两共轴均匀带电圆环的相互作用能,并求出它们之间的相互作用力,绘制出电场力的空间分布图,进而讨论了作用力和两圆环半径和中心距离等参量的关系.