厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

The Surface Energy of MgO: Multiscale Reconstruction from Thermal Groove Geometry

The surface energy of MgO is determined using experimental data collected from equilibrated thermal grooves circumscribing island grains. Local equilibrium assumptions at each groove require that the Herring equations be satisfied at each data site, thereby yielding a large and overdetermined system of equations involving the surface energy . This inverse problem is then solved using a new technique that is statistical in nature and multiscale in implementation. The resulting discrete solution represents a statistically significant representation of the surface energy of MgO as a function of surface orientation. Comparisons to results derived from a more traditional approach, along with suggested further applications, are discussed.     

Characterization of inner layer thickness change of a composite circular tube using nonlinear circumferential guided wave:A feasibility study

The feasibility of using the nonlinear effect of primary circumferential guided wave (CGW) propagation for characterizing the change of inner layer thickness of a composite circular tube (CCT) has been investigated. An appropriate mode pair of the fundamental and double-frequency CGWs (DFCGWs) has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction. When changes in the inner layer thickness (described as the equivalent inner layer thickness) take place, the corresponding nonlinear CGW measurements are conducted. It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter (Δβ) measured with CGWs propagating through one full circumference, and that the effect of second-harmonic generation (SHG) is very sensitive to change in the inner layer thickness. The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.     

拓展小尺寸离心压气机级失速裕度机匣处理方案的数值研究

为提高一小尺寸离心压气机级的失速裕度,首先为其设计了进气回流和周向槽两种机匣处理方案,对实壁机匣和处理机匣压气机级总体性能的分析表明;进气回流并没有起到拓展压气机级失速裕度的效果,周向槽机匣处理对压气机级失速裕度的改进量也只有约2.41%。因此考虑了一种新的机匣处理方案,即同时采用进气回流和周向槽机匣处理。计算结果表明:压气机级失速裕度得到了明显的提高,提高幅度达13.25%。     

新型交叉孔道式平板热管的性能研究

提出了一种设计交叉孔道式平板热管的新思路,按照这种方法设计加工的新型结构的平板热管均热器具有较强的轴向和径向导热能力,能明显减小导热热阻;特殊的孔道结构增强了毛细作用力,能有效强化相变换热。实验测试了不同热流密度和不同充液率下该热管正常工作时的稳态温度分布,给出了不同充液率和不同热流下的热阻,得到了热管的最佳充液率,证...     

双层碳纳米管中的周向导波

考虑双层碳纳米管的层间范德华力,采用连续介质力学的波动理论,建立了双层碳纳米管中周向导波传播模型,研究周向导波的频散现象.通过与单层碳纳米管结果的比较表明,双层碳纳米管中周向导波的传播表现出更为明显的频散特性,出现更多的模态干涉现象,并发现在某些特殊频率处出现成对模态的消失与新启现象.     

Spontaneous Formation of Microgroove Arrays on the Surface of p‐Type Porous Silicon Induced by a Turing Instability in Electrochemical Dissolution

Self‐organization plays an imperative role in recent materials science. Highly tunable, periodic structures based on dynamic self‐organization at micrometer scales have proven difficult to design, but are desired for the further development of micropatterning. In the present study, we report a microgroove array that spontaneously forms on a p‐type silicon surface during its electrodissolution. Our detailed experimental results suggest that the instability can be classified as Turing instability. The characteristic scale of the Turing‐type pattern is small compared to self‐organized patterns caused by the Turing instabilities reported so far. The mechanism for the miniaturization of self‐organized patterns is strongly related to the semiconducting property of silicon electrodes as well as the dynamics of their surface chemistry.     

不耦合装药爆破孔壁压力峰值的实验研究

不耦合装药爆破孔壁压力峰值是控制岩体轮廓成形质量及进行非流固耦合爆破振动响应数值模拟分析的重要参数,本文采用实验方法研究了不耦合装药爆破的孔壁压力峰值:利用材质为20钢的无缝薄壁钢管模拟不耦合装药爆破炮孔,以高灵敏度、高精度的应变片为传感器,选用超动态应变仪采集钢管内置柱状炸药卷爆炸过程中钢管外壁产生的环向应变,应用动荷载作用下薄壁圆筒的动力响应计算方法,反演分析采集的钢管外壁环向应变数据,得到了爆破过程中空气冲击波作用于钢管内壁的冲击荷载压力峰值,间接测量了不耦合装药爆炸后的孔壁压力峰值。实验获得了6种不耦合装药工况下的爆破孔壁压力峰值测试数据,并计算了相应工况下实验值较准静态爆生气体压力的增大倍数,拟合结果表明压力增大倍数随不耦合系数的增大近似呈线性增长。同时也分析了部分试验工况下爆炸测试结果不理想的原因,研究成果可为轮廓爆破孔壁压力峰值的测试与计算提供参考。     

Theoretical and nonlinear behavior analysis of a flexible rotor supported by a relative short herringbone-grooved gas journal-bearing system

This paper considers the bifurcation and nonlinear behavior of a flexible rotor supported by a relative short herringbone-grooved gas journal bearing system. A numerical method is employed to a time-dependent mathematical model. A finite difference method with successive over relation method is employed to solve the Reynolds’ equation. The system state trajectory, Poincaré maps, power spectra, and bifurcation diagrams are used to analyze the dynamic behavior of the rotor and journal centers in the horizontal and vertical directions under different operating conditions. The analysis reveals a complex dynamic behavior comprising periodic and quasi-periodic response of the rotor and journal centers. It further shown the dynamic behavior of this type of system varies with changes in bearing number and rotor mass. The results of this study contribute to a better understanding of the nonlinear dynamics of herringbone-grooved gas journal bearing systems.