短脉冲载荷下金属材料的层裂破坏

 本文用点炮加载聚酯薄膜飞片撞击金属靶材料，飞片速度0.714~2.24 km/s，脉冲宽度40~80 ns，击靶压力为2.280~11.952 GPa。在回收的铝、铜和钢靶样品上观察到层裂现象。通过金相分析发现它们的破坏方式与在一般较长脉冲加载下的破坏方式相似，铝和铜以延性方式破坏；钢则以脆性方式破坏。一维和二维数值模拟结果表明通常的几种层裂判据在这个应力、应变和应变率范围内也基本上适用。     

On Publications on the Brittle Fracture Mechanics of Prestressed Materials

The paper analyzes new publications on the brittle fracture mechanics of prestressed materials. It is found out that new scientific results published in the International Journal of Solids and Structures in 2002 are a particular case of the results obtained at the Institute of Mechanics 20 years ago     

固体的冲击拉伸碎裂

固体材料在冲击拉伸载荷作用下常常会断裂成多个碎片(碎片化)，固体材料碎片化的物理机制是多点损伤同时在固体中成核和发展，导致固体多处破坏。自 Mott 对固体的动态碎裂问题进行了开创性研究后，几十年来，对固体动态碎裂机制的研究一直是应用物理学、力学、航天和兵器工程等领域共同关心的重要课题。本文介绍了在冲击拉伸载荷作用下固体的动态碎裂研究的发展历史，给出相关的理论分析、实验研究和数值模拟的研究进展，特别针对现有的各种关于碎片尺度、碎片分布、以及碎片化物理机制的理论模型进行了较详尽的阐述和讨论，最后指出现有实验和理论研究中仍然存在的关键科学问题及进一步的研究展望。     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

激光切割脆性材料的温度场模拟

激光切割脆性材料是一个复杂的光致热过程。在综合考虑材料的热物性参数、初始条件及边界条件的情况下,运用Ansys软件建立了激光切割脆性材料温度场的三维有限元模型。采用APDL语言实现了对热流密度的高斯分布和强制对流换热及移动激光热源的模拟。通过设置不同的激光切割参数,对温度场的变化进行了模拟分析。所建立的温度场模拟系统可以对实际激光切割脆性材料的热过程进行前期预测,并能对激光切割参数的选择进行一定的优化,以减少实际切割的盲目性。     

花岗岩单轴压缩侧向变形及脆性破坏机制实验研究

为研究花岗岩侧向变形及脆性破坏机制,对花岗岩试件进行单轴压缩实验。利用动态应变采集系统、数字散斑相关方法(DSCM)和显微观测手段,记录并分析花岗岩试件在单轴压缩过程中的宏观侧向应变、局部侧向应变以及破裂面形貌,并与水泥砂浆试件的破坏过程对比,讨论了花岗岩脆性破坏机制。实验与分析结果表明:(1)花岗岩试件在加载初期发生侧向收缩变形,产生并发展于压密阶段,消失于线弹性阶段初期,这主要由于试件内部裂纹闭合造成的;此后,宏观侧向应变持续增长,当侧向应变与轴向应变之比接近0.5时试件破坏;(2)在峰值载荷前很长一段时间内,局部侧向应变在一定范围内波动,临近试件破坏时局部侧向应变最大值和最小值均出现较大幅度的波动,二者差值迅速增大,试件不均匀程度增大,最终导致试件破坏;(3)在峰值载荷前有无塑性屈服阶段是峰值载荷后脆性破坏程度的重要影响因素,而宏观裂纹的贯通程度是峰值载荷后应力降大小的决定因素。     

基于裂纹扩展脆性岩石动力压缩力学特性研究

动态压缩荷载作用下,脆性岩石内部动态细观裂纹扩展特性,对岩石宏观动态力学特性有着重要的影响。然而,对岩石内部动态细观裂纹扩展与宏观动态力学特性的关系研究较少。基于准静态裂纹扩展作用下的应力-应变本构模型、准静态与动态裂纹扩展断裂韧度关系、裂纹速率与应变率关系模型及应变率与动态断裂韧度关系,提出了一种基于细观力学的动态应力-应变本构模型。其中裂纹速率与应变率关系,是根据裂纹长度与应变关系的时间导数推出;应变率与动态断裂韧度关系,是根据推出的裂纹速率及应变率关系,与裂纹速率及断裂韧度关系相结合而得到。研究了应变率对应力-应变本构关系及动态压缩强度影响。并通过试验结果验证了模型的合理性。讨论了岩石初始损伤、围压、模型中参数m、ε0和R对应力-应变关系、动态压缩强度和动态弹性模量的影响。研究结果可为动态压缩荷载作用下深部地下工程脆性围岩稳定性分析提供了一定的理论支持。     

脆性断裂的微观机理和非平衡统计特性

Ⅰ.引言如何才能将断裂的微观机理与宏观特性结合起来,把断裂理论建立于微裂纹演化的微观动力学基础上,从而统一导出所有重要的宏观力学量并以某些更基本的物理量表示之?这是人们为实现材料的强度和韧性设计必需解决的一个重要理论课题。就脆性断裂来说,尽管现有几个主要代表性的理论如断裂力学理论、位错理论和统计理论都各取得一定成就,但就其理论框架来说,由于明显的局限性,却难以发展成可供指导设计的理论。因此,人们在探索微观与宏观相结合的断裂理论。最近的工作表明:从微裂纹演      

Experimental study about nano-deformation field near quasi-cleavage crack tip

Using the nano-moiré method, we measure the near tip nanoscopic deformation on the [111] plane of single crystal silicon with a loaded quasi-cleavage crack running in the [110] direction. The measured strain distribution ahead of the crack tip agrees with the linear elastic fracture mechanics prediction up to 10 nm from the crack tip. Dislocations of Peierls type are detected and they extend from the crack tip over a length of hundreds of Burgers vectors.     

The near crack tip fields of stress and damage for concrete

The crack tip fields of stress, strain and damage for concrete under both antiplane shear and plane strain conditions are investigated based on the damage model proposed by Mazars and Lemaitre [2]. The structures of near tip fields obtained are similar to those for an elastic-perfectly-plastic material. It has been found that damage boundaries can not be determined by the near-tip analysis due to the discontinuities of stresses on the damage boundaries induced by the damage model used in the present paper.The Project is Supported by National Natural Science Fundation of China.