A resonance light scattering method for determination of DNA using Ru(bpy)2PIP(V)2+

A novel method for DNA detection is proposed that is based on the enhancement of resonance light scattering (RLS) of Ru(bpy)₂PIP(V)²⁺ at pH 2.7. Under optimum conditions, good linear relationships were obtained in the wide concentration range of 16–5120 ng mL⁻¹. The linear equation is I _RLS = 13.15 + 171.4 c (μg mL⁻¹), the correlation coefficient (r) is 0.9999. The detection limit of calf thymus DNA is 5.02 ng mL⁻¹. Plasmid DNA extracted from bacillus subtilis was determined by the method with satisfactory results.     

Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.     

Modulated potential electrogenerated chemiluminescence of luminol and Ru(bpy) 3 2+

Chemiluminescence emission intensity is modulated by modulating the potential of a working electrode which is used to generate a key species in the electrogenerated Chemiluminescence (ECL) reaction. The emission is monitored synchronously using a lock-in amplifier. The reactions used in the characterization are luminol with hydrogen peroxide and tris(2,2-bipyridyl)ruthenium (II) (or Ru(bpy) ₃ ²⁺ ) with oxalate. Modulation widths of ± 50 mV yield maximum signals for luminol when centered at 0.45 V (vs Ag/AgCl) and for Ru(bpy) ₃ ²⁺ when centered at 1.05 V. The resulting signal decreases with increasing modulation frequency and shows that luminol/H₂O₂ is a faster ECL system than Ru(bpy) ₃ ²⁺ /oxalate. Working curves for luminol and for oxalate have essentially the same linear range and slope with the modulated potential approach as with a DC electrode potential. This approach provides capability for differentiating the analytical signal from constant background emission or stray light.     

Study on Electrochemiluminesce of Ru(bpy3)2+ Immobilized in a Titania Sol‐Gel Membrane

The immobilization of tris(2,2′‐bipyridyl)ruthenium(II), Ru(bpy)₃²⁺, at a glassy carbon electrode was achieved by entrapping the Ru(bpy)₃²⁺ in a vapor deposited titania sol‐gel membrane. The electrogenerated chemiluminescence (ECL) of the immobilized Ru(bpy)₃²⁺ was studied. The Ru(bpy)₃²⁺ modified electrode showed a fast ECL response to both oxalate and proline. The ECL intensity was linearly related to concentrations of oxalate and proline over the ranges from 20 to 700 μmol L^?1 and 20 to 600 μmol L^?1, respectively. The detection limits for oxalate and proline at 3σ were 5.0 μmol L^?1 and 4.0 μmol L^?1, respectively. This electrode possessed good precision and stability for oxalate and proline determinations. The electrogenerated chemiluminescence mechanism of proline system was discussed. This work provided a new way for the immobilization of Ru(bpy)₃²⁺ and the application of titania sol‐gel membrane in electrogenerated chemiluminescence.     

Tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence sensor based on carbon nantube dispersed in sol-gel-derived titania-Nafion composite films

A highly sensitive and stable tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) electrogenerated chemiluminescence (ECL) sensor was developed based on carbon nanotube (CNT) dispersed in mesoporous composite films of sol-gel titania and perfluorosulfonated ionomer (Nafion). Single-wall (SWCNT) and multi-wall carbon nanotubes (MWCNT) can be easily dispersed in the titania-Nafion composite solution. The hydrophobic CNT in the titania-Nafion composite films coated on a glassy carbon electrode certainly increased the amount of Ru(bpy)₃²⁺ immobilized in the ECL sensor by adsorption of Ru(bpy)₃²⁺ onto CNT surface, the electrocatalytic activity towards the oxidation of hydrophobic analytes, and the electronic conductivity of the composite films. Therefore, the present ECL sensor based on the CNT-titania-Nafion showed improved ECL sensitivity for tripropylamine (TPA) compared to the ECL sensors based on both titania-Nafion composite films without CNT and pure Nafion films. The present Ru(bpy)₃²⁺ ECL sensor based on the MWCNT-titania--Nafion composite gave a linear response (R² = 0.999) for TPA concentration from 50 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 10 nM while the ECL sensors based on titania-Nafion composite without MWCNT, pure Nafion films, and MWCNT-Nafion composite gave a detection limit of 0.1 μM, 1 μM, and 50 nM, respectively. The present ECL sensor showed outstanding long-term stability (no signal loss for 4 months).     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.     

固定Ionic liquid/Silica sol/Nafion膜中的联吡啶钌电化学发光行为的研究及应用

制备了Ionic liquid/Silica sol/Nafion-联吡啶钌复合物膜修饰金电极。采用循环伏安(CV)和电致化学发光(ECL)法,考察了联吡啶钌和左氧氟沙星在此修饰电极上的电化学及其发光行为。结果表明,此修饰电极表现出很好的电化学活性和电化学发光响应。基于左氧氟沙星对固定化联吡啶钌在0.1 mol/L磷酸盐缓冲液中的弱电化学发光信号有较强的增敏作用,建立了电化学发光检测盐酸左氧氟沙星的新方法。在最佳实验条件下,左氧氟沙星浓度在1.0×10-7～1.0×10-4mol/L范围内与相对发光强度呈线性关系(r2=0.998 4),检出限(S/N=3)为1.59×10-9mol/L。连续平行测定2.2×10-5mol/L的左氧氟沙星溶液10次,发光强度的相对标准偏差(RSD)为3.6%。对样品进行回收率试验,回收率在95.6%～103.5%之间,RSD(n=5)为3.0%。该方法具有较高的选择性和灵敏度,样品处理简单快速,用于盐酸左氧氟沙星的测定,结果满意。     

An evidence of contact ion pair in β-(acyloxy)alkyl radical heterolysis during copper(I)-mediated synthesis of trisubstituted alkenes

The first evidence for a unified mechanism of heterolysis in β-(acyloxy)alkyl radical involving contact ion pair (CIP) is presented for both fragmentation and rearrangement of the acyloxy group in the reaction of 1-alkoxy-2,2,2-trichloroethyl acetate with 2 mol equiv each of CuCl and bpy in refluxing DCE under a N₂ atmosphere and availed this reaction for the synthesis of Z-stereoselective trisubstituted alkenes. The stereochemistry of the trisubstituted alkenes was assigned by the uniform pattern of the chemical shift values of some relevant signals in ¹H and ¹³C NMR spectra. This assignment was further supported by the X-ray diffraction spectroscopy of Z-1-chloro-2-(4-nitrobenzyloxy)vinyl acetates.     

分子印迹固相萃取-电化学发光检测牛奶中氯霉素

基于氯霉素(CAP)能强烈抑制Ru(bpy)32+/TPA体系的电化学发光(ECL)信号,结合分子印迹固相萃取(MISPE)样品前处理技术,建立了一种高灵敏度检测牛奶中CAP残留量的方法。在最优实验条件下,体系的ECL猝灭值ΔI与CAP浓度呈良好线性关系,线性范围为1.0×10-13～1.0×10-11g/mL,检测限为3×10-12g/mL,精密度和准确度好,可用于牛奶中CAP残留量的测定。