On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.     

一种新型偶氮化合物中的高效率实时全息光栅的实验研究

合成了一种新的含偶氮基的三元共聚物，由于在主链中链接柔性基团，使其具有相对较低的玻璃化温度，在６３３ｎｍ处光感生双折射δｎ值可达１０＾－３量级。实验上获得了几个乃至几百微米厚的具有高光学无效性的薄膜，在６３３ｎｍ波长处写一息光栅的实时单光束衍射效率可达１０％以上。     

Photosensitive Azopolymer Brushes via Atom Transfer Radical Polymerization for Protein Sensing

Novel photosensitive azopolymer brushes were synthesized via surface initiated atom transfer radical polymerization using initiator self‐assembled on Au surface. The chemical structures of azobenzene derivatives were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). The surface morphology of azopolymers via atom transfer radical polymerization (ATRP) for different time was investigated by atomic force microscopy (AFM). Additionally, the photoisomerization of azopolymer was measured by ultraviolet‐visible spectroscopy (UV‐Vis). The results indicate that such azopolymers can undergo trans‐cis‐trans photoisomerization efficiently by photo‐irradiation with UV light. Furthermore, this photoisomerization property could also induce the reversible adsorption of bovine serum albumin (BSA) adsorption on azopolymer brush surfaces. This adsorption kinetics of the reversible process can be measured by surface plasmon resonance (SPR) spectroscopy in situ. It suggests that the protein biochips could be regenerated safely by UV irradiation rather than by being rinsed with chemical reagents.     

Influence of chromophore concentration and network structure on the photo‐orientation properties of crosslinked epoxy‐based azopolymers

An azo prepolymer (TAZ) was synthesized by reaction between Disperse Orange‐3 (DO3) and diglycidyl ether of bisphenol A (DGEBA). Selected amounts of TAZ were blended with DGEBA and cured with an aliphatic diamine, either meta‐xilylenediamine (MXDA) or polyetheramines (Jeffamine D series). The photoinduced anisotropy and optical storage properties in two series of crosslinked epoxy‐based azo polymers with different architectures and chromophore contents (from 3 to 24 in weight) have been investigated. Measurements of the birefringence (Δn) induced with linearly polarized 488 nm light show that the Δn values increases with DO3 weight fraction. Networks with the same chromophore concentration but different backbones exhibit similar levels of induced anisotropy under the same irradiation conditions. The remaining birefringence and relaxation times are influenced by the molecular weight between crosslinks of networks. Higher is reflected in shorter relaxation times and lower remaining birefringence. In terms of the level of induced dichroism measured on relaxed films, it was found an agreement with the remaining anisotropy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1004–1014, 2009     

Polymer complexes: supramolecular modeling for determination and identification of the bond lengths in novel polymer complexes from their infrared spectra

Synthesis and characterization of allyl propenyl‐2‐(4‐derivatives phenylazo)butan‐3‐one (HL_n) are described. The monomers obtained contain N?N and carbonyl functional groups in different positions with respect to the allyl group. This structural difference affects the stereochemical structure of the uranyl polymer complexes prepared by the direct reaction of uranyl acetate with the monomers. The polymer complexes are characterized by elemental analyses, ¹H and ¹³C NMR, electronic and vibrational spectroscopy and other theoretical methods. The bonding sites of the hydrazone are deduced from IR and NMR spectra and each of the ligands were found to bond to the UO₂²⁺ ion in a bidentate fashion. The monomers obtained contain N?N and carbonyl functional groups in different positions with respect to the allyl group. IR spectra show that the allyl azo homopolymer (HL_n) acts as a neutral bidentate ligand by coordinating via the two oxygen atom of the carbonyl group, thereby forming a six‐membered chelating ring. The υ₃ frequency of UO₂²⁺ has been shown to be a good molecular probe for studying the coordinating power of the ligands. The υ₃‐values of UO₂²⁺ from IR spectra have been used to calculate the force constant, F_UO (in 10^?8 N/Å) and the bond length R_UO (in Å) of the U? O bond. We adopted a strategy based upon both theoretical and experimental investigations. The theoretical aspects are described in terms of the well‐known theory of 5d–4f transitions. The necessary structural data (coordination geometries and electronic structures) are determined from a framework for the modeling of novel polymer complexes. The Wilson, G. F. matrix method, Badger's formula and the Jones and El‐Sonbati equations were used to determine the stretching and interaction force constants from which the U? O bond distances were calculated. The bond distances of these complexes were also investigated. The effect of Hamett's constant is also discussed. Copyright © 2006 John Wiley & Sons, Ltd.     

Direct Fabrication of Nanodomes‐Combined Surface Relief Gratings on Azobenzene Polymer Films with Controlled Shapes and Sizes

In this study, we present nanodomes‐combined surface relief gratings (SRGs) of azopolymer films with controlled shapes and sizes. We investigate the effect of the polarization mode of light interference on leading nanodomes in the conventional SRG patterns. In addition, we also systematically study the relationship between Bragg distance of light interference and shapes of nanodomes. From this, we explain the anisotropic self‐assembled behavior nanodomes in photoaddressable azopolymer films regarding polarization modes as well as spatial confinement effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 731–737     

Fluorine‐substituted azobenzene destabilizes polar form of optically switchable fulgimide unit in copolymer system

Fulgimide and various size and electronic nature of substituents on the terminal position of azobenzene in the pendant homo/copolymethacrylates were synthesized. Differential scanning calorimetry analysis indicates the homopolymer possessing C‐form fulgimide unit exhibited higher T_m than that of E‐form of the homopolymer and revealed C‐form is highly ordered. Thermal stability suggests azobenzene homopolymers with electron donating substituents have high thermal stability than electron withdrawing substituents. Polarized optical microscopy observation disclosed homopolymers viz., NI, CY, FL, ME , and T‐ME exhibited liquid crystalline mesophases between their T_m and T_i. Optical properties of homo/copolymers were investigated by UV–vis and fluorescence spectroscopy. UV–vis spectroscopy displayed C‐form fulgimide absorption in F‐co‐FL around 482 nm which is around 40 nm lesser than C‐form of substituted azobenzene copolymers. Similarly, fluorescence pattern of F‐co‐FL by UV irradiation exhibited emission intensity slowly increased to certain level then decreases with two new emissions at 430 and 480 nm attributed to terminal position of fluorine atom on azobenzene destabilizes polar form (C‐form) fulgimide unit in the copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1565–1578, 2010     

Polymer dye-containing nanocomposites as photocatalysts

A significant improvement of photocatalytic efficiency is achieved by the synthesis of TiO₂/SiO₂ nanocomposites where silica matrix provides the transport of reagents to TiO₂ nanoparticles via porous structure, generation of the new active sites and thermal stability. The semiconductive films contained 10 or 30% of TiO₂ in silica matrix are synthesized by sol-gel method using concentrated anatase titania colloid. The complex composites consisted of i) the Acridine Yellow dye molecules and the polyepoxypropyl carbazole; ii) the azobenzene containing polymer covered onto the titania/silica films are obtained as photocatalytic materials. Photocatalytic activity of the composites is tested via the reduction of dichromate ions.     

Mechanisms of optical anisotropy induction in azopolymer films

The process of optical anisotropy indiction in azopolymer films upon irradiation by polarized UV light is studied by means of UV and IR birefringence spectroscopy. A substantial dependence of the character of the relaxation of the induced anisotropy on the exposure time to the exciting light is revealed: whereas the process of anisotropy induction is reversible at small exposure times, at large exposure times the induced anisotropy virtually does not relax and even increases after the irradiation is terminated. A difference between kinetic curves of dichroism and birefringence induction is shown: at exposure times corresponding to the saturation of the induced dichroism a slow increase in the birefringence curve is observed. Results obtained are explained in terms of the assumption of partial ordering of macrochain fragments in irradiated films. The assumption is substantiated by measurements of polarized IR spectra. Institute of Physics of the National Academy of Sciences of Ukraine, 46, Nauka Ave., Kiev, 252650, Ukraine. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 1, pp. 121–125, January–February, 1998.