Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

希土烯丙基化合物的研究——Ⅷ.镝、钬、铒、镱和镥的2-甲基烯丙基化合物的合成

用无水希土氯化物与2-甲基烯丙基氯化镁及四甲基乙二胺,0℃下,在四氢呋喃中反应,加乙醚后可得到五个含2-甲基烯丙基的重希土元素的化合物。经元素分析、红外光谱和质谱分析的鉴定,确定该化合物的组成为Ln(C₄H₇)₂Cl₅Mg₂(tmed)₂。     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

离子液体中用Heck反应合成2-取代萘烯丙醇化合物

利用Heck反应, 在离子液体、金属钯或镍、碱和膦配体反应体系中, 由卤代萘与烯丙醇反应, 制得了高收率和高选择性的2-取代萘烯丙醇化合物. 该方法原料便宜易得、操作简单、反应体系可循环使用. 并讨论了醋酸镍替代醋酸钯、不同膦配体、溶剂及碱对反应转化率的影响. 通过核磁共振、红外光谱、质谱和元素分析对产物的结构进行了表征.     

希土烯丙基化合物的合成——Ⅱ.镥、钆的烯丙基化合物的合成

本文合成了两个新的对空气极敏感的希土烯丙基化合物,由无水希土氯化物与希丙基锂在四氢呋喃—乙醚中反应制得。产物经元素分析、红外光谱等确定其组成为:Li₂Ln(C₃H₅)₅·3Dioxane(Ln=Gd,Lu)。     

Magnetic Structure of CsPd2F5

The structure of CsPd₂F₅ has been confirmed from neutron diffraction data on powdered sample. CsPd₂F₅ crystallizes in the orthorhombic Imma space group. At 100 K, the unit-cell constants are a = 6.473(2) Å, b = 7.853(5) Å, c = 10.718(3) Å and the calculation carried out using the Rietveld method leads to R₁ = 0.020. The network is formed of PdF₆ octahedra chains containing half of Pd in high-spin configuration, connected one to each other by square planes containing the other half of Pd in low-spin configuration. CsPd₂F₅ orders antiferromagnetically below T_N = 38 K. In the ordered state a weak ferromagnetic component occurs (σ₀ = 0.098 μ_B at 2 K). The magnetic structure determined at 4 K is consistent with the magnetization data and can be described in the Im′m′a′ magnetic group without any doubling of the unit-cell parameters. Within the chains, Pd²⁺ are coupled antiparallel. The magnetic moments are located in the (x0z) plane, the angle between the moments and the z axis being 18°.     

Use of allyl, 2-tetrahydrofuryl, and 2-tetrahydropyranyl ethers as useful C3-, C4-, and C5-carbon sources: palladium-catalyzed allylation of aldehydes

Palladium-diethylzinc or palladium-triethylborane catalytically promotes self-allylation of 2-(allyloxy)tetrahydrofurans, 2-(allyloxy)tetrahydropyrans, and their hydroxy derivatives on the rings (ribose, glucose, mannose, deoxyribose, deoxyglucose). All the reactions proceed at room temperature and provide polyhydroxyl products, sharing a structural motif of a homoallyl alcohol, in good to excellent yields with high levels of stereoselectivity. Useful C3-unit elongation, which makes the best use of an allyl ether as a protecting group and a nucleophilic allylation agent, is demonstrated. Mechanisms for the umpolung reaction (of an allyl ether into an allylic anion) and stereoselectivity associated with allylation of aldehydes are discussed.