Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Small angle neutron scattering studies on nonaqueous dispersions of calcium carbonate Part 2. Determination of the form factor for concentric spheres

Colloidal dispersions of calcium carbonate, stabilised primarily by a surface active agent, in both toluene and dodecane have been examined by small angle neutron scattering. A model has been developed to simulate the scattering behaviour of the particles and is based on the idea of a concentric sphere with a homogeneous layer of adsorbed material surrounding a core particle. Computations based on the model show a wide variation of scattering behaviour with variation of the coherent scattering length of the dispersion medium. These predictions were confirmed by experiment. A method is described for analysis of the experimental data which leads to a determination of the thickness of the adsorbed layer, the radius of the core particle and the standard deviation of core particle radius.     

2-羟丙基三甲基氯化铵壳聚糖的制备及其性能研究

以脱乙酰度为95.37%的壳聚糖(CTS)为原料,异丙醇为溶剂,2,3-环氧丙基三甲基氯化铵为改性剂,于80℃反应12 h合成了水溶性季铵盐2-羟丙基三甲基氯化铵壳聚糖(HACC)。HACC的吸水保水性是CTS的2倍～3倍,加入化妆品中培养2周后菌落总数少于100 CFU.g-1。     

Transients of the Open-Circuit Potential Observed during the Interaction of Formic Acid with Preliminarily Adsorbed Oxygen on a Platinized Platinum Electrode

Transients of the open-circuit potential, which are observed during the interaction of formic acid with preliminarily adsorbed oxygen (O_ads) on a Pt/Pt electrode in 0.5 M H₂SO₄, are measured. It is established, by means of the method of cathodic potentiodynamic pulses, that the slowest interaction of formic acid with O_ads occurs in the region of large coverages of the electrode surface by oxygen (θ_O ∼1–0.8). A presumption is put forward that the process rate in this region is defined by a direct reaction of O_ads with molecules of formic acid from the bulk solution. It is shown that the interaction of formic acid with O_ads in the region of intermediate coverages (θ_O ∼ 0.8–0.2) proceeds via a mechanism of “conjugated reactions.” Transients of the open-circuit potential for formic acid are compared to transients for carbon monoxide obtained in analogous conditions. The substantially shorter overall time of potential decay in the case of CO (at the same concentrations) is caused by a faster reaction of CO with adsorbed oxygen in the region of large θ_O. The difference is explained by assuming that the HCOOH adsorption as opposed to CO bears a dissociative character.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 936–942.Original Russian Text Copyright © 2005 by Manzhos, Maksimov, Podlovchenko.     

Spreading of dipalmitoyl phosphatidylcholine on the surface of sodium deoxycholate aqueous solution

The surface pressure vs. mokcular surface area relations for dipalmitoyl phosphatidylcholine (DPPC) insoluble monolayer and sodium deoxycholate (SDC) adsorbed monolayer,L and D1, respectively, were obtained from the analyses of surface tensions measured by the Wilhelmy glass plate. Also, D1 was obtained by a drop-weight method. Next, the surface pressure time course,(t), of the SDC aq. was measured by the Wilhelmy plate before and after DPPC was spread on the liquid surface. At DPPC spreading,(t) jumped to a maximum,, and decreased along an exponential curve. The values of with various surface amounts of DPPC and bulk concentrations of SDC were analyzed using a dual surface-region model. The model enabled the estimation of. For better fitting, modified relations were constructed in place of D1. The exponential decrease of(t) was also observed on the SDC adsorbed monolayer which was rapidly compressed by a moving barrier. The(t) relaxation rate constants of the SDC monolayers which were compressed by DPPC spreading and the moving barrier agreed with each other, suggesting a desorption of SDC from the surface.     

Determining moisture absorption/desorption properties of commercial membranes by thermogravimetry (TG)

A series of different commercial membranes were characterized by their moisture absorption and desorption properties under controlled humidity and temperature conditions. This work was made possible by combining the features of a constant humidity conditioning chamber with those of a thermogravimetric (TG) apparatus. These two modules were interconnected by tubing, rotameters, an atmosphere-recycling microbellows pump and switching valves. Under programmed heating and isothermal conditions reproducible data were obtained in terms of weight-gain or weight-lossvs. time and pore size. Evaluation of the resulting TG curves allowed us to report reasonable differences in the materials, some of which had been previously surface-modified by the manufacturer.