大尺寸掺钕和掺铥铝酸钇晶体的生长和退火技术

通过分析铝酸钇(YAP)晶体产生孪晶、开裂、色心和弥散性散射的原因,探讨了克服这些缺陷和问题的技术途径.采用提拉法生长了b轴方向的掺钕和掺铥铝酸钇(Nd:YAP和Tm:YAP)晶体,通过温场系统、生长工艺参数和切割工艺的优化,克服了晶体开裂的问题,晶体直径达到46mm;通过真空退火工艺,既显著减轻了紫外和可见区的色心吸收,又减小了晶体的应力,有助于克服晶体在加工过程中的开裂问题.晶体生长实验和晶体的显微观察表明:YAP晶体中的弥散状散射很可能同熔体中组分的均匀性有关,通过增大晶体的直径,增强强迫对流有助于减轻晶体中的弥散状散射.高质量b轴Nd:YAP和a轴Tm:YAP晶体已分别实现二极管泵浦大于140W的1.079μm和大于10W的1.99μm激光输出.     

一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline），利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比，本文开发的框架具有如下特点：（1）采用基于接口的设计，可使用基于接口的插件对流水线的功能进行扩展；（2）允许用户使用编写脚本的方式构建图像处理流水线，编辑与修改流水线都很方便；（3）支持带有分支结构的流水线，便于流水线的构建与调试.目前，该框架已经在商用系统中获得了应用.     

A narrow-linewidth continuous wave Ho：YAL03 laser with Fabry-Perot etalons

A narrow linewidth continuous wave Ho：YAP laser with two Fabry-Perot etalons pumped by a Tm：YLF laser is reported. The maximum output power reaches 8.3 W when the incident pump power is 15.8 W, with 52.5% optical-to- optical conversion efficiency and 62.6% slope efficiency. A stable laser output at 2118.1 nm is achieved, with a linewidth less than 0.4 nm （full width at half maximum）. The beam quality factor is M2- 1.25, measured by the traveling knife-edge method.     

LD-end-pumped Nd:YAP laser operating at 1341.4 nm and doubling of its frequency

We report an LD-end-pumped linearly-polarized continuous-wave (CW) Nd:YAP laser operating at 1341.4 nm. Making use of the plane-concave resonator (T = 2.4%) and the plane-plane resonator (T = 2.6%), we obtain linearly-polarized laser radiation at 1341.4 nm with a power of 3.15 and 2.86 W and corresponding optical slope efficiency of 18.4 and 17.5%, respectively. The effect of the laser oscillation mode on the output is analyzed. An experiment on the intra-cavity frequency doubling with an LBO crystal has been performed, and a laser power of 431 mW in one direction at 670.7 nm was obtained.     

Sol–gel combustion synthesis of chromium doped yttrium aluminum perovskites

A water-based sol–gel combustion synthesis was optimized in order to achieve pure yttrium aluminium perovskite (YAlO₃, YAP). The method involved three main steps: xerogel formation, combustion treatment and calcination of the combusted precursors. TG DTA, FTIR and XRPD, used to investigate the precursor phase evolution, confirmed the strong influence of gel synthesis conditions, combustion temperature and calcination rate on YAP purity. Both stoichiometry and kinetics control during all the preparation steps are crucial in order to avoid the formation of undesired Y₃Al₅O₁₂ (YAG) and Y₄Al₂O₉ (YAM) stable phases. This method allowed to synthesize, for the first time from an aqueous sol–gel process, single phase samples of YAP. A series of samples with composition: YAl_(1−x)Cr_(x)O₃ where x is 0, 0.035, 0.135, 0.250, 0.500, 0.750 was obtained. A consistent decrease of calcination temperature, with respect to conventional solid state synthesis, was achieved by sol–gel combustion, avoiding polyphase materials even without the use of mineralizers. This is an important result in several applications like the synthesis of ceramic pigments.     

High-power CW diode-side-pumped 1341 nm Nd:YAP laser

A high-power CW diode-side-pumped Nd:YAP laser with linearly polarization at 1341 nm has been described. The laser characteristics including thermal lens and stability of flat–flat resonator were studied. By comparing the output powers at different resonator lengths and different output couplers, the c-axis polarized laser working at 1341 nm has been obtained with a maximum output power of 121 W at the pumping power of 555 W. The optical–optical efficiency is 21.8% and the optical slope efficiency is 40%. The a-axis polarized laser at 1339 nm has also been successfully obtained when the c-axis polarized laser had become instable with the increase of pumping power.     

Zinc oxide nanoparticles promotes ferroptosis to repress cancer cell survival and inhibits invasion and migration by targeting miR-27a-3p/YAP axis in renal cell carcinoma

BackgroundRenal cell carcinoma (RCC) is a prevalent malignancy with growing mortality and high metastasis. Ferroptosis has been identified as an essential process in cancer development, but the regulatory mechanism underlying the RCC progression remains obscure. The nanomaterial zinc oxide nanoparticles (ZONs) have presented anti-cancer function. Here, we identified the critical role of ZONs in promoting ferroptosis of RCC cells by regulating miR-27a-3p/YAP axis.MethodsThe effect of ZONs on RCC was analyzed by qPCR, Western blot, MTT assays, colony formation assays, Flow cytometry analysis, transwell assays, wound healing assays, iron assays, lipid ROS detection, luciferase reporter gene assays, and tumor xenograft.ResultsThe treatment of ZONs repressed expression of GPX4 and SLC7A11 and enhanced ROS accumulation and iron/Fe²⁺ levels in RCC cells. Ferroptosis activator erastin repressed RCC cell viabilities and ZONs further repressed this effect. ZONs inhibited invasion and migration of RCC cells and treatment of ZONs represses RCC cell survival in vitro. ZONs suppressed RCC cell growth in tumorigenicity mouse model. Mechanically, ZONs down-regulated YAP expression by inducing miR-27a-3p, in which YAP overexpression and miR-27a-3p inhibition reverse ZONs -inhibited RCC cell survival in vitro.DiscussionThus, we concluded that ZONs induced RCC cell ferroptosis to suppress RCC cell survival by targeting miR-27a-3p/YAP axis. The clinical significance of ZONs for the treatment of RCC is required to further study and may benefit the targeted therapy of RCC.     

Modeling High-Energy Ball Milling in the Alumina-Yttria System

Experimental results from high-energy ball milling of alumina-yttria powder mixtures have been analyzed with models collected from the literature. Depending on the milling conditions, either there is formation of an intermediate phase in the alumina-yttria system (yttrium aluminum perovskite, YAP), or the sample becomes mostly amorphous. Variations due to milling tool material can be accounted for by local models based on the Hertzian theory of elastic bodies, but the effects of changing mills are poorly accounted for by published models. Therefore, the concept of an impact frequency distribution over the energy spectrum is introduced as a tool for studying the characteristics of the mills. The pressure on the powder trapped between two colliding bodies has been found to be the factor deciding the outcome of the process. The threshold behavior of the system yields an amorphous structure for low pressures, and formation of YAP when impact pressures exceed the threshold value.     

LD end pumped mode locked and cavity dumped Nd:YAP laser at 1.34 μm

We report a LD end pumped actively mode locked, passively Q switched and cavity dumped Nd:YAP laser at 1.34 μm. The dumped output pulse energy of 160 μJ is obtained at a repetition rate of 10 Hz. Passing through a LD end pumped, double-passed Nd:YAP amplifier the pulse energy is amplified to 1.44 mJ. The corresponding amplification factor is 9. Stimulated Raman scattering experiment is taken with a 9 mm long PbWO₄ Raman crystal. Maximum of 20% Raman conversion is reached.     

国产YAP:Ce闪烁晶体的相对探测能力测量

为适应在n、γ混合脉冲辐射场中对低强度快脉冲γ辐射测量的需要,近年国内新研制出实用型YAlO3:Ce(YAP:Ce)快响应无机闪烁晶体.我们使用脉冲线性电流大于1.5 A的光电倍增管,分别配置这种晶体以及CeF3、NaI等晶体构成闪烁探测器,在放射性标准源场中,对晶体的相对探测能力进行测量.测量结果表明:国产新型YAP:Ce无机晶体对这1.25 MeV 射线的探测能力比同体积的CeF3平均高一个量级,是同体积NaI的40;左右;当晶体厚度小于2 mm时,YAP:Ce与CeF3、NaI的输出比值分别大于16和44;,说明厚度越薄晶体的相对探测能力越强.