反应离子刻蚀ZnTe的THz辐射和探测研究

运用电光采样技术揭示了反应离子刻蚀（RIE）ZnTe晶体表面THz辐射的光学整流产生机制， 观察到0.25 ps的THz场分布.通过比较刻蚀前后以及不同刻蚀条件下ZnTe样品在不同激发功 率下的THz辐射强度，发现由于反应离子刻蚀破坏了ZnTe样品表面的有序性，晶体的电光系 数随射频功率的增加而减小.借助于计算不同刻蚀条件下ZnTe晶体的频率响应函数，分析了 随射频功率增加ZnTe晶体响应频谱展宽的现象. 关键词： THz辐射 反应离子刻蚀 ZnTe     

Selective etching of ZnTe in HF:H2O2:H2O solution: Interpretation of extended defect‐related etch figures

HF:H₂O₂:H₂O solution (40%wt.HF: 30wt.%H₂O₂: H₂O, 3:2:1 by volume) was used to reveal extended defects (line, face and volume defects) in bulk ZnTe crystals grown from Te solution. The etch patterns were analyzed based on their size, shape and distribution. The etch figures, both in the shape of pits and hillocks with high resolution, show forms controlled by the symmetries of the respective faces were produced. Two different sizes of pits were observed, the larger‐size pits correspond to dislocations penetrating the surface, however, the smaller‐size texture pits are produced on the defect‐free region, which serve as standard pits on respect faces. The face defects, such as grain boundaries, sub‐grain boundaries, dislocation walls, twins and stacking faults, can be all displayed clearly. Another essential feature of the etchant is that, it can effectively dissolve Te‐rich phase (Te inclusion/precipitates), which makes it promising to reveal the shape of this volume defect.     

ZnTe(ZnTe∶Cu)多晶薄膜的XPS研究

用共蒸发法在室温下制备了ZnTe及ZnTe∶Cu多晶薄膜,测量了电导率温度曲线,发现不掺杂的ZnTe薄膜的暗电导随温度的增加而线形增加,呈常规的半导体材料特征;掺Cu的ZnTe薄膜在温度较低时,lnσ随温度升高而缓慢增加,随后缓慢降低,达到一极小值,当温度继续升高时又陡然增加,呈现异常现象。用XPS研究了N₂气氛下退火前后表面状态,发现不掺Cu的ZnTe薄膜呈现富Te现象。掺Cu后Te氧化明显,以ZnTe形式存在的Te明显减少;ZnTe∶Cu薄膜中Zn的含量在退火前后变化明显,退火前,Zn主要以ZnTe形式存在,退火后Zn原子向表面扩散,使表面成分更加均匀,谱峰变宽;退火时,部分Cu原子进入晶格形成Cu_xTe相,引起载流子浓度变化,导致ZnTe∶Cu多晶薄膜的电导温度关系异常。     

ZnTe（ZnTe：Cu）多晶薄膜的XPS研究

用共蒸发法在室温下制备了ZnTe及ZnTe：Cu多晶薄膜，测量了电导率温度曲线，发现不掺杂的ZnTe薄膜的暗电导随温度的增加而线形增加，呈常规的半导体材料特征；掺Cu的ZnTe薄膜在温度较低时，lnσ随温度升高而缓慢增加，随后缓慢降低，达到一极小值，当温度继续升高时又陡然增加，呈现异常现象。用XPS研究了N2气氛下退火前后表面状态，发现不掺Cu的ZnTe薄膜呈现富Te现象。掺Cu后Te氧化明显，以ZnTe形式存在的Te明显减少；ZnTe：Cu薄膜中Zn的含量在退火前后变化明显，退火前，Zn主要以ZnTe形式存在，退火后Zn原子向表面扩散，使表面成分更加均匀，谱峰变宽；退火时，部分Cu原子进入晶格形成CuxTe相，引起载流子浓度变化，导致ZnTe：Cu多晶薄膜的电导温度关系异常。     

The effect of two-photon absorption and optical excitation area on the generation of THz radiation

It was found experimentally that the THz radiation throughput based on optical rectification is strongly related to the optical excitation size in a ZeTe emitter. The factors affecting the THz radiation throughput are investigated in detail both experimentally and theoretically. By taking into account optical rectification, diffraction and two-photon absorption effects, a theoretical model is established to describe the emitting field intensity of THz radiation. There is excellent agreement between the theoretical results and the experimental data under high excitation power. Both theoretical and experimental results demonstrate that there is a trade-off between these three effects for THz radiation, and that in order to increase the THz radiation throughput based on optical rectification, one should choose suitable excitation size under a given pump power.     

High-Efficiency ZnCdSe/ZnSSe/ZnMgSSe Green Light-Emitting Diodes

Green light-emitting diodes (LEDs) were fabricated employing a ZnCdSe/ZnSSe triple quantum-well (TQW) active region surrounded by ZnMgSSe cladding layers grown on an n-type (100) GaAs substrate by molecular beam epitaxy (MBE). A 3.5 mW pure green emission was observed for the surface-emitting LED device at a peak wavelength of 513.3 nm (2.415 eV) with a spectral half-width of 11.7 nm (55 meV) under a 20 mA (4.6 V) direct current at room temperature (25°C). These correspond to an external quantum efficiency of 7.2%, a power conversion efficiency of 3.8%, a luminous current efficiency of 66 lm/A, and a luminous efficiency of 14 lm/W.     

Monocrystalline Cd0.2Zn0.8Te solid solution obtained by self‐selecting vapour growth

Cd_0.2Zn_0.8Te monocrystals with the sizes of about 15 mm have been produced by self‐selecting vapour growth (SSVG). High degree of structural perfection of monocrystalline Cd_0.2Zn_0.8Te was achieved. Excellent compositional uniformity was observed as well. To our knowledge, no comparable results are reported for this solid solution. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of type-II ZnO/ZnTe core-shell nanowire arrays for solar cell applications

Large area, well-aligned type-II ZnO/ZnTe core-shell nanowire arrays have been fabricated on an a-plane sapphire substrate. The ZnO nanowires were grown in a furnace by chemical vapor deposition with gold as catalyst and then were coated with a ZnTe shell on the ZnO nanowires surface by a metal-organic chemical deposition chamber. The morphology and size distribution of the ZnO/ZnTe core-shell nanowire arrays were studied by scanning electron microscopy (SEM) and the crystal structure was examined by x-ray diffraction (XRD). Transmission measurement was used to study the optical properties of the core-shell nanowires. The results indicated that the ZnO/ZnTe core-shell nanowire arrays have good crystalline quality. In addition, it was found that the nanowire arrays have good light absorption characteristics and these properties make it suitable for making photovoltaic devices.     

Influence of 120 MeV Si9+ ion irradiation on ZnTe semiconductor thin films

ABSTRACT

ZnTe (Zinc Telluride) is a potential semiconducting material for many optoelectronic devices like solar cells and back contact material for CdTe-based solar cells. In the present study, ZnTe thin films were prepared by thermal evaporation technique and then irradiated with 120?MeV Si⁹⁺ ions at different fluences. These films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–Visible spectroscopy techniques. XRD study confirms increased crystallinity and grain growth for post-irradiated ZnTe thin films for fluences, up to 1?×?10¹¹ ions cm^?2. However, the grain size and crystallinity decreased for higher fluence-exposed samples. SEM images confirm the observed structural properties. Modification of the surface morphology of the film due to the ion irradiation with different fluences is studied. Optical band gap of film is decreased from 2.31?eV (pristine) to 2.17?eV after irradiation of Si⁹⁺ ions.