The effect of construction material, contents and room geometry on the sound field in dwellings at low frequencies

An experimentally validated finite element method is used to model the sound level in rooms at low frequencies. It is demonstrated that the dimensions of rectangular rooms strongly influence the sound pressure level difference. Additional factors were investigated which are not normally considered in the frequency range where diffuse sound field conditions can be assumed. Three effects were investigated: room damping due to wall vibrations, furniture, the effect of small deviations from simple rectangular shapes. It is confirmed by field measurements that the vibrations of masonry walls and floors introduce less damping than surfaces of lightweight construction. Assigning to the FE model a damping equivalent to a surface absorption of 0.02 reproduces the effect of walls of heavyweight construction. Damping equivalent to a surface absorption of 0.15 reproduces the effects of plastered timber-frame walls, floors and ceilings. The work was briefly extended to a room pair built with heavyweight and lightweight material of construction. The modification of the shape of the room frequency response highlights well the effect of material of construction. In-situ and laboratory measurements show that furniture has little effect on steady-state room response below 100 Hz. Modelling a wall recess smaller than 0.5 m improved the agreement between prediction and measurements but the assumption of a simple rectangular room remains appropriate.     

Near-crater discoloration of white lead in wall paintings during laser induced breakdown spectroscopy analysis

During Laser-Induced Breakdown Spectroscopy (LIBS) analysis of white lead pigment (basic lead carbonate, 2PbCO₃·Pb(OH)₂), used in wall paintings of historical interest, a yellow–brown discoloration has been observed around the crater. This phenomenon faded after a few days exposure under ambient atmosphere. It was established that the mechanism of this discoloration consists in lead oxides (PbO) formation. It was verified by further experiments under argon atmosphere that recombination of lead with oxygen in the plasma plume produces the oxides, which settle around the crater and induce this discoloration. The impact of discoloration on the artwork's aesthetic aspect and the role of atmosphere on discoloration attenuation are discussed. The mechanism is studied on three other pigments (malachite, Prussian blue and ultramarine blue) and threshold for discoloration occurrence is estimated.     

粘度法研究高分子溶液行为的实验改进(Ⅱ)

高分子在粘度计毛细管管壁上的吸附不仅会导致毛细管有效管径减小，而且可以导致毛细管界面性质发生显著改变，具体表现为测定高分子溶液流过时间t之前和之后纯溶剂的流过时间t0和t0′与高分子溶液流过时间t对浓度作图外推到浓度为零时的值t0^*并不一致。不同温度时聚乙烯吡咯烷酮（PVP）水溶液粘度测定结果表明，当吸附讷发子显著改变了毛细管界面性质时，需要将高分子溶液粘度测定方法由t/t0′改为t/t0^*。经过改进的粘度测定方法不仅更加普适合理，而且更加简单有效。     

考虑壁面滑移的Z-W流变模型及其应用

总结了聚合物熔体在剪切溶场壁面滑移研究的成果，提出了Z－W模型的物理概念。该模型考虑了界面分子链和固体壁面间解吸－吸附而发生的滑移。界面分子链和内部分子链间解缠－重新缠结而发生的表观滑移以及变形摩擦滑移。在稳态简单剪切流运过程，模型可以化简为应力和应变的二次微分方程，说明了壁面滑移来源于Cohesive滑移和Adhesive滑移两部分，对于自激振荡相关的多重内振荡和多重外振荡进行了归纳，应用统一模型定性地解释了毛细管实验中剪切应力的非线性，瞬态自激振荡、滑－粘转换和鲨鱼皮等现象，在聚合物熔体振动剪切流动（LAOS）中，统一模型可以简化为杜芬方程，通过模拟发现，该模型可解释小应变振幅下振动剪切时的线性流变行为和在大振幅振动流动中的复杂非线性行为。非线性行为与熔体粘弹性以及近壁面界面层的性质有关，统一模型在特殊情况下还可以简化Joshi模型，结构网络模型，Hatzikiriakos或等效的Graham模型，可见，Z－W模型内内涵比较丰富，适用面较广，也从一个侧面说明该模型具有相当的合理性。     

Fourier transform infrared spectroscopy and the analytical study of works of art for purposes of diagnosis and conservation

This paper is a study of the analytical capacity of Fourier transform infrared spectroscopy (FT-IR) for any type of samples from works of art. The analytical information obtained with this technique on organic and inorganic compounds is extremely useful in the preliminary studies necessary for diagnosis and to decide on the conservation process. This paper reports the analysis and study with FT-IR on samples extracted from the microlayers in several works of art from different periods (16th to 18th century) comprising wall paintings and canvas. The most outstanding of these being the frescoes by A. Palomino from two ceilings in the Santos Juanes church. The analytical procedures for the different components of the works studied such as

1. (a) varnish applied to wood panels and canvas paintings,

2. (b) binding media and pigments used by the artists,

3. (c) inerts, mortars, stuccos and grounds have been optimized. The FT-IR technique offers a quick analysis of microsamples (less than 0.5 mg) and is able to characterise the different molecular groups which provide information on the nature of the different materials of organic and inorganic origin used by the artist and thus permits the diagnosis of pathologies requiring conservation treatment.

Non-destructive in situ determination of pigments in 15th century wall paintings by Raman microscopy

Raman microscopy has been applied to the study of 15th century wall paintings in a chapel of St. Orso Priory palace (Aosta, Italy) in view of their restoration. The use of a transportable instrument has made it possible to work non-destructively in situ without sampling. The main inorganic pigments used by the unknown artist, namely mercury sulphide, azurite, white lead, red and yellow ochre, carbon black and lead tin yellow type I have been identified, and the presence of organic substances and of some decay products (calcium sulphate and oxalate) has been observed.     

Propagation of a pre-existing turbulent fluid fracture

The propagation of rough and smooth wall pre-existing turbulent fluid fractures is investigated. The laminar fluid fracture is included as a special case for comparison. Lubrication theory is assumed to apply in the fracture and turbulence is introduced through the wall shear stress. The Perkins–Kern–Nordgren approximation is made in which the fluid pressure is proportional to the half-width of the fracture. The fracture half-width satisfies a non-linear diffusion equation. By using a linear combination of the Lie point symmetries of the non-linear diffusion equation a group invariant solution for the fracture length, volume and half-width is derived. The evolution of the length, half-width and mean flow velocity is analysed for a range of working conditions at the fracture entry. It is found that the mean flow velocity increases approximately linearly along the fracture.     

Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region

We performed laboratory experiments on bubbly channel flows using silicone oil, which has a low surface tension and clean interface to bubbles, as a test fluid to evaluate the wall shear stress modification for different regimes of bubble migration status. The channel Reynolds numbers of the flow ranged from 1000 to 5000, covering laminar, transition and turbulent flow regimes. The bubble deformation and swarms were classified as packing, film, foam, dispersed, and stretched states based on visualization of bubbles as a bulk void fraction changed. In the dispersed and film states, the wall shear stress reduced by 9% from that in the single-phase condition; by contrast, the wall shear stress increased in the stretched, packing, and foam states. We carried out statistical analysis of the time-series of the wall shear stress in the transition and turbulent-flow regimes. Variations of the PDF of the shear stress and the higher order moments in the statistic indicated that the injection of bubbles generated pseudo-turbulence in the transition regime and suppressed drag-inducing events in the turbulent regime. Bubble images and measurements of shear stress revealed a correlated wave with a time lag, for which we discuss associated to the bubble dynamics and effective viscosity of the bubble mixture in wall proximity.     

Wall shear stress and near-wall convective transport: Comparisons with vascular remodelling in a peripheral graft anastomosis

Fluid dynamic properties of blood flow are implicated in cardiovascular diseases. The interaction between the blood flow and the wall occurs through the direct transmission of forces, and through the dominating influence of the flow on convective transport processes. Controlled, in vitro testing in simple geometric configurations has provided much data on the cellular-level responses of the vascular walls to flow, but a complete, mechanistic explanation of the pathogenic process is lacking. In the interim, mapping the association between local haemodynamics and the vascular response is important to improve understanding of the disease process and may be of use for prognosis. Moreover, establishing the haemodynamic environment in the regions of disease provides data on flow conditions to guide investigations of cellular-level responses.     

Stick-slip flow of high density polyethylene in a transparent slit die investigated by laser Doppler velocimetry

The oscillating flow instability of a molten linear high-density polyethylene is carefully studied using a single screw extruder equipped with a transparent slit die. Experiments are performed using laser Doppler velocimetry in order to obtain the local velocities field across the entire die width. At low flow rate, the extrusion is stable and steady state velocity profiles are obtained. During the instability, the velocity oscillates between two steady state limits, suggesting a periodic stick-slip transition mechanism. At high flow rate, the flow is mainly characterized by a pronounced wall slip. We show that wall slip occurs all along the die land. An investigation of the slip flow conditions shows that wall slip is not homogeneous in a cross section of the slit die, and that pure plug flow occurs only for very high flow rates. A numerical computation of the profile assuming wall slip boundary conditions is done to obtain the true local wall slip velocity. It confirms that slip velocities are of the same order of magnitude as those measured with a capillary rheometer.