基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

校准电表的一种方法

利用电位差计的高精度，设计出合理的实验电路对C31型电表进行校准，使得电表的准确度等级得以提高。     

热敏电阻温度计的设计与制作

本文介绍了设计性实验“热敏电阻的设计与制作”的实施情况。说明了只要选题合适、要求恰当,设计性实验不仅可行,而且对物理实验训练的总结提高十分有效。     

Dual-modality and dual-energy gamma ray densitometry of petroleum products using an artificial neural network

The prediction of volume fractions in order to measure the multiphase flow rate is a very important issue and is the key parameter of multi-phase flow meters (MPFMs). Currently, the gamma ray attenuation technique is known as one of the most precise methods for obtaining volume fractions. The gamma ray attenuation technique is based on the mass attenuation coefficient, which is sensitive to density changes; density is sensitive in turn to temperature and pressure fluctuations. Therefore, MPFM efficiency depends strongly on environmental conditions. The conventional solution to this problem is the periodical recalibration of MPFMs, which is a demanding task. In this study, a method based on dual-modality densitometry and artificial intelligence (AI) is presented, which offers the advantage of the measurement of the oil–gas–water volume fractions independent of density changes. For this purpose, several experiments were carried out and used to validate simulated dual modality densitometry results. The reference density point was established at a temperature of 20 °C and pressure of 1 bar. To cover the full range of likely density fluctuations, four additional density sets were defined (at changes of ±4% and ±8% from the reference point). An annular regime with different percentages of oil, gas and water at different densities was simulated. Four features were extracted from the transmission and scattered detectors and were applied to the artificial neural network (ANN) as inputs. The input parameters included the ²⁴¹Am full energy peak, ¹³⁷Cs Compton edge, ¹³⁷Cs full energy peak and total scattered count, and the outputs were the oil and air percentages. A multi-layer perceptron (MLP) neural network was used to predict the volume fraction independent of the oil and water density changes. The obtained results show that the proposed ANN model achieved good agreement with the real data, with an estimated root mean square error (RMSE) of less than 3.     

pH计检定仪期间核查方法

介绍pH计检定仪的4种期间核查方法:传递比较法、多台对比法、留样测量法、实验室间比对法。传递比较法能直接反应pH计检定仪的变化,适用于已建立pH计检定仪检定装置的单位;多台对比法与留样测量法方便、快捷,可操作性强,适合大多数单位进行pH计检定仪的期间核查;实验室间比对法对设备要求较低,但需要协调的单位较多,周期较长,费用较高,实用性差。     

超声波燃气表矩形流道的雷诺修正系数仿真研究

在超声波流量计测量技术中, 雷诺修正系数相关的研究对于提高计量精度有重要作用. 为研究矩形流道的雷诺修正系数与雷诺数的关系, 对矩形流道在常温常压流量较小情况下进行仿真, 结果发现: 矩形流道层流状态下的雷诺修正系数与雷诺数呈线性相关. 保持压强、体积流量不变, 在不同温度下进行仿真及拟合, 结果表明: 在不同温度下雷诺修正系数与雷诺数的线性关系依然满足. 在上述实验基础上, 对矩形流道湍流状态下的雷诺修正系数与雷诺数关系进行研究, 通过改变温度、压强和体积流量进行仿真及拟合发现, 矩形流道湍流状态下雷诺修正系数与雷诺数呈非线性相关.     

固体热导率测量仪的新发现

实验通过稳态法使用TC-3型固体热导率测定仪[1,9]的测量方法改变来测量海洋大气热导率,结构简单,误差更小,一机多用.通过改变加热铜盘A与散热铜盘B之间的距离,探究距离对大气热导率的影响,并与教材中介绍的气体热导率测定仪测量的大气热导率进行比较.     

取样管型流分相式气液两相流体流量计

提出了用取样管来组成一种分流分相式气液两相流体流量计,通过取样管从被测两相流中成比例地分流出一部分气液混合物,然后应用-小型分离器将其分离成单相气体和液体,并用单相流量计分别测量它们的流量,最后根据测量值计算被测两相流体的各相总流量.文中给出了这种两相流体流量计的组成原理,分流系数特性及实验结果.研究结果表明,取样管的端口形状对分流系数的特性影响较大,其中S型端口的效果较理想,能够在较宽的测量范围内保持分流系数的稳定.     

现场激光能量计量技术的研究

由于激光能量计传感器的灵敏度与温度条件有关，在温差较大时，有的传感器灵敏度偏差可达到16%，因而在靶场、野外现场温度条件下，现有的激光能量计无法进行准确测试。为了解决这一问题，研制了一种新型的现场激光能量计。在现有激光能量计的基础上，通过选择相对透明、吸收层相对较厚(毫米量级)、热敏面不易损伤的激光吸收材料，对激光能量计内置温度传感器及数字处理电路进行了重新设计，满足了不同温度条件下现场能量测量的需求。