纳构件加工后的力学特性

"采用分子动力学模拟的方法,运用镶嵌原子模型,研究了经过刻划后的单晶铜纳构件在不同拉伸速度条件下的力学行为. 通过原子位图、缺陷原子透视图、径向分布函数及应力-应变关系研究加工后纳构件在拉伸负载作用下的变化特性,并与理想单晶铜纳构件进行对比分析．模拟结果表明,加工后的纳构件的屈服强度较理想纳构件的屈服强度有明显下降,屈服强度随着刻槽深度的增加而下降,而且屈服强度对刻槽方向和拉伸速度敏感;纳结构在拉伸负载作用下,其应力应变关系出现了双峰形式,即工作硬化现象,二次屈服后表现为Z字形逐波下降形式．刻划深度、刻划     

C20三个异构体稳定性的从头计算研究

采用HF,B3LYP,MP2和QCISD等理论方法在6-31G和6-31G^*基组水平上,对C20的3个主要异构体碟型(Bowl)、笼型(Cage)和环型(Ring)的结构进行理论研究,得出这3个异构体的相对稳定性的次序为:Ring>Bowl>Cage.计算结果显示,分子轨道具有离域特性,电子的这种离域特征有利于原子间更好的成键,可避免出现大的张力,这是Cage型异构体虽然违反“五元环隔离规则”(Isolatedpentagonrule)却能稳定存在的原因.     

孔洞和孪晶界对银纳米线形变行为联合影响的分子动力学模拟

Based on molecular dynamics simulations, the plastic deformation of silver nanowires under uniaxial tension has been studied systematically. In this paper, the mechanical properties of [111]-oriented twin nanowires with different hole sizes have been studied. The existence of holes has no effect on the elastic deformation stage. The hole on the twin boundary has two main roles in the plastic deformation stage. During the initial stages of plastic deformation, the main function of the hole is to produce new dislocations as dislocation sources at small hole sizes.Upon increasing the hole size, the main effect changes to stop dislocation slip. During the late stages of plastic deformation, the two functions of the hole complement each other, upon increasing the hole size, the function of the hole as dislocation sources becomes obvious, leading to weakening of the plasticity of the nanowires.     

Shape controlled interpolatory ternary subdivision

Ternary subdivision schemes compare favorably with their binary analogues because they are able to generate limit functions with the same (or higher) smoothness but smaller support.In this work we consider the two issues of local tension control and conics reproduction in univariate interpolating ternary refinements. We show that both these features can be included in a unique interpolating 4-point subdivision method by means of non-stationary insertion rules that do not affect the improved smoothness and locality of ternary schemes. This is realized by exploiting local shape parameters associated with the initial polyline edges.     

十二胺聚甘油醚表面活性剂的合成及光谱表征

十二胺与缩水甘油在碱催化下合成了不同聚合度的十二胺聚甘油醚表面活性剂,并以FTIR、ESI-MS、13CNMR进行了合成产品的光谱表征。用吊环法测定了该表面活性剂水溶液在25℃时的表面张力,考察了不同聚合度对其表面性质的影响。结果表明,十二胺二聚甘油醚、四聚甘油醚、六聚甘油醚水溶液的临界胶束浓度CMC（mmol/L）分别为0.32、0.055和0.20,先减小而后增大;最低表面张力γCMC（mN/m）分别为28.46、29.41和34.02,逐渐增大。     

Tension–torsion fracture experiments – Part II: Simulations with the extended Gurson model and a ductile fracture criterion based on plastic strain

An extension of the Gurson model that incorporates damage development in shear is used to simulate the tension–torsion test fracture data presented in Faleskog and Barsoum (2013) (Part I) for two steels, Weldox 420 and 960. Two parameters characterize damage in the constitutive model: the effective void volume fraction and a shear damage coefficient. For each of the steels, the initial effective void volume fraction is calibrated against data for fracture of notched round tensile bars and the shear damage coefficient is calibrated against fracture in shear. The calibrated constitutive model reproduces the full range of data in the tension–torsion tests thereby providing a convincing demonstration of the effectiveness of the extended Gurson model. The model reinforces the experiments by highlighting that for ductile alloys the effective plastic strain at fracture cannot be based solely on stress triaxiality. For nominally isotropic alloys, a ductile fracture criterion is proposed for engineering purposes that depends on stress triaxiality and a second stress invariant that discriminates between axisymmetric stressing and shear dominated stressing.     

梁山慈竹微纤丝角的X射线衍射技术解析及对拉伸力学的影响

采用X射线衍射技术对梁山慈竹微纤丝角(MFA)的变异特性进行了研究,并就微纤丝角对拉伸力学的影响进行了分析。结果表明,梁山慈竹微纤丝角随竹龄增加的变化较小,三年生竹的微纤丝角最大,为8.521°,二、三年生竹微纤丝角的平均值明显大于四、五年生竹,差异绝对值小于0.1°。竹秆基部、中部和上部微纤丝角的平均值分别为8.499°,8.497°和8.483°,变异系数在5%左右。微纤丝角从竹青到竹黄呈增大的趋势。方差分析表明,径向部位对微纤丝角有显著性影响,竹龄和纵向部位对微纤丝角无显著影响。顺纹拉伸强度和杨氏模量呈线性相关(r=0.57)。微纤丝角对力学性能有一定影响,拉伸强度和杨氏模量中分别有35%和43%的变异由微纤丝角引起。     

张力腿平台有限振幅运动的方程和数值解

论证了张力腿平台（TLP）在波浪作用下发生有限振幅运动时,所受惯性力、粘性力、浮力等载荷不仅与波浪场有关,还与瞬时响应有关,是响应的非线性函数;张力腿拉力也是各自由度位移的非线性函数．所以分析TLP受力时必须考虑平台的瞬时加速度、速度和位移,在瞬时位置建立运动方程．据此推导出TLP发生有限振幅运动时的外力计算公式,建立了TLP 6自由度有限振幅运动非线性控制方程．其中考虑了由6自由度有限位移引起的多种非线性因素,如各自由度之间的耦合、瞬时湿表面、瞬时位置等;还包括自由表面效应、粘性力等因素引起的非线性．用数值方法求解所得到的非线性运动方程．对典型平台ISSC TLP进行了数值分析,求得该平台在规则波作用下的6自由度运动响应．用退化到线性范围的解与已有解进行了对比,吻合良好．数值结果表明,综合考虑非线性因素后响应有明显改变．