Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen

The synergetic effect of corrosion and corrosion induced hydrogen embrittlement damage processes which occur at local scale has been found to result in a dramatic macroscopic tensile ductility loss of the 2024 aluminum alloy. In the present work, the tensile behaviour of corroded 2024 T351 specimens has been estimated on the basis of FE analysis by taking into account the local material properties in the damaged areas. A parametric study is involved to account for the effect of thickness in the results. Calculated tensile properties obtained with the analysis agree well with experimental data.     

聚苯基单醚喹噁啉薄膜的性能与物理老化

研究了物理老化对聚苯基单醚喹啉薄膜的结构与力学性能的影响 .用差示扫描量热计 (DSC)及正电子湮没寿命谱 (PALS)方法表征了两种不同物理老化条件试样的凝聚结构以及自由体积的差别 .结果表明 ,物理老化使聚苯基单醚喹啉薄膜玻璃化转变温度移向高温 ,在其末端出现热焓吸收峰 ,分子链堆砌紧密使自由体积减小 ,分子可动性降低 .用动态力学分析 (DMTA)以及静态拉伸性能测试等方法研究了两类试样的力学性能 ,结果表明 ,物理老化后 ,试样的动态储能模量稍有增加 ,力学损耗降低 .而静态拉伸实验的断裂应变降低 ,屈服应力增加 ,断裂能降低 ,试样在宏观上由韧性断裂变为明显的脆性断裂 .     

Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers

The stabilization of polyolefins against γ-sterilization has been studied with single or binary additive system. The present attempt is to utilize synergistic mixtures of stabilizers which are approved for food contact applications. Ethylene-propylene (EP) copolymer has been melt-mixed with hindered amine stabilizers (HAS), phenolic antioxidants and organo-phosphites (hydroperoxide decomposer). Samples were sterilized with different doses of γ-radiation. Stabilization was characterized in terms of changes in the functional groups (oxidation products), tensile properties, yellowing and surface morphology by FTIR spectroscopy, Instron, colorimetry (reflectance) and scanning electron microscopy (SEM), respectively. Results were discussed by comparing the stabilizing efficiency of mixtures with and without phenol system. Among phenol containing systems, where we mostly observe discoloration due to the oxidation of hindered phenol and the combination of secondary HAS, tertiary HAS, organo-phosphite and hindered phenol exhibited improved stabilization efficiency than single or binary additive systems. The mixture of secondary HAS and tertiary HAS, has shown antagonistic effect of stabilization whereas their combination with organo-phosphite has exhibited synergistic effect of stabilization even at higher doses of γ-sterilization. The effects have been explained through the interaction between the stabilizers.     

Kinetics and mechanism of azidomercuration of alkenes,cycloalkenes, and their derivatives with a mercuric acetate-sodium azide system

The kinetics of azidomercuration of alkenes, cycioalkenes, and their derivatives with a Hg(OAc)₂-NaN₃ system (1 1, 1 2, and 1 3) was studied. Based on the data on the product structure and kinetic results, it was concluded that HgOAcN₃ and Hg(N₃)₂ play the role of azidomercuration reagents. The reactions with alkenes having a strained double bond occur by a concerted scheme. With nonstrained alkenes, a multistep mechanism is realized, its first reversible step involving the formation of a mercurinium intermediate with an ion pair structure.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No.12, pp. 2479–2485, December, 1995.     

Influence of mechanical properties of pectin films on charge density and charge density distribution in pectin macromolecule

The hydration and mechanical properties of citrus pectin films were examined in conditions relevant to those in the plant cell wall. The pectins used for this study varied in the degree of esterification (DE) (high or low) and charge distribution on the backbone (random or block). The hydration of the films was controlled in an osmotic pressure experiment using polyethylene glycol solutions (PEG 20000). Hysteresis tests at constant deformation rate (stress vs deformation) were used for investigating the mechanical behaviour of films. Mechanical and hydration properties of pectin films were examined as a function of charge density, charge density distribution and counterion environment—K⁺, Ca²⁺, Mg²⁺. Swelling decreased with increasing counterion concentration. The effect is stronger in the case of Ca²⁺ and Mg²⁺ for low esterified pectins and therefore crosslinks from divalent ions could be assumed. The crosslink effect is confirmed in mechanical experiments where an increase in the film tensile modulus is observed with increasing counterion concentration. It is shown for the first time that in case of highly concentrated pectin solutions Mg²⁺ cations also act as a crosslinker for pectin macromolecules.     

Investigation of solution and solid-state properties of poly(R,R,4,4-cyclohexylidene diphenylene diphenyl-4,4-disulfonate)

Solution and solid-state properties of poly(R,R^′,4,4^′-cyclohexylidene diphenylene diphenyl-4,4^′-disulfonate) (PS-6: R=R^′=H; PS-7: R=CH₃, R^′=H; PS-8: R=R^′=Cl; PS-9: R=CH₃, R^′=Cl and PS-10: R=R^′=Br) have been determined and discussed in terms of nature of the substituents. Ultrasonic velocity (2 MHz) and acoustical parameters of PS-7 and PS-9 solutions in chloroform, 1,2-dichloroethane and tetrahydrofuran (THF) at 30, 35 and 40 °C have been evaluated to understand the effect of methyl and chlorine groups, concentration, and temperature on molecular interactions. The data are interpreted in light of solvent-polymer and polymer-polymer interactions. Predominant solvation is observed in THF system and the least in chloroform system at all three temperatures. The structural change is observed above 2%. Both the polymers possess structure-forming tendency and it is supported by positive values of S_n.The densities of PS-7 and PS-9 determined by floatation method are in excellent agreement with calculated values but those determined by specific volume method differ remarkably from calculated values due to solvation effect. PS-7 and PS-9 possess respectively tensile strength of 38.4 and 1.1 N/mm²; electric strength of 16.2 and 25.0 kV/mm and volume resistivity of 5.7×10¹⁶ and 1.0×1017Ωcm. The low tensile strength of PS-9 is due to low molecular weight, rigid and brittle nature of the polymer chains. PS-6 to PS-9 are thermally stable up to about 349-379 °C while PS-10 up to about 279 °C and involved two-step degradation. DTA thermograms indicated T_g at about 204-226 °C. High activation energy indicated rigid nature of the polymer chains and the positive magnitudes of ΔS* indicated less ordered transition state. The nature of the substituents (CH₃, Cl and Br) affected thermal, mechanical and electrical properties.     

Tricyclo[2.2.0.0]hexane: a new hypothetical molecule which should have only one inverted carbon atom

HF and MP2 calculations with the 6-31G** and 6-311G** basis sets and those at MP2/cc-pVTZ level were carried out for the hypothetical tricyclo[2.2.0.0^1,3]hexane. The results indicate that the molecule under study should have one carbon atom with highly unusual inverted configuration. The analysis of the vibrational frequencies of this molecule as well as the analysis of its plausible decomposition routes performed at the DFT level indicate that this unique molecule could be a plausible synthetic target.     

Morphology and tensile properties of glass bead filled low density polyethylene composites: MATERIAL PROPERTIES

The mechanical properties of glass bead filled low density polyethylene (LDPE) composites in tension have been investigated by using an Instron material testing machine. It is found that with increase of the glass bead weight fraction (φ) the tensile modulus (E_c) and the tensile yield stress (σ_yc) increase as a form of nonlinear function but contrary to the elongation strain at break; the correlation between E_c and φ accords with the logarithmic mixing rule and the relationship between σ_y and the volume fraction (φ_f) can be described by means of a second order equation; the effects of the glass bead diameter on the mechanical properties are not large; when φ and the bead size are suitable, the enhanced toughness effect of the filled-systems is more significant; the tensile strength of the glass bead filled system pretreated with a coupling agent are somewhat greater than those of the untreated system. In addition, the morphology of the samples is studied to explain the relationship between the micro-structure and the mechanical properties of the composites.     

Determination of Fibre Pore Structure: Influence of Salt,pH and Conventional Wet Strength Resins

It has been shown, in the present investigation, that the two methods used to investigate the pore size distribution of unbleached chemical pulps, i.e. inverse size exclusion chromatography (ISEC) and nuclear magnetic resonance (NMR), give different average pore radius for the pores inside the fibre wall. This is due to the way in which these experiments are performed and the sensitivity of the methods to different types of pores in the cell wall. It was also shown that the two methods gave different results when changing the pH and the ionic strength of the pulp suspension. The pore radius, as detected with ISEC, decreased with both increasing ionic strength and decreasing pH, indicating a loose structure of the exterior of the fibrillar network. However, the pore radius as detected with NMR, was virtually unaffected when increasing the ionic strength, indicating a very rigid structure of the interior of the fibre wall. Decreasing pH though, lead to a decrease in pore radius indicating that upon protonation of the carboxylic groups in the fibre wall, the electrostatic repulsion is diminished and the average pore radius decreases. The NMR technique was also used to study wet strength aid penetration into the fibre wall. It was shown that wet strength aids with a small molecular weight, penetrated the fibre wall, as detected by a decrease in pore radius. It was also shown that addition of different wet strength aids increased the tensile index of the sheet and decreased the fibre strength, measured as zero span-strength of the sheets.