Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

液晶显示器用衬垫料的扫描电镜图像

论述了液晶显示器 (LCD)用衬垫料的作用和性能要求。给出了液晶显示器用衬垫料的扫描电镜图像。该图像对观测衬垫料的粒径分布和控制液晶显示器的盒厚均匀程度 ,消除液晶显示器的底色差异具有一定的意义。实验所得图像为从事液晶显示器的工程技术人员提供了清晰的衬垫料图像 ,为排除衬垫料的不均匀因素所造成的液晶屏的质量问题提供了依据。     

三片式液晶投影仪的立体视觉研究

基于对三原色信号进行偏振特性的分析,提出了一种在三片式液晶投影显示设备上实现立体显示的新方法。该方法利用红色和蓝色信号光与绿色信号光在偏振方向上正交的特性,在信号通道之间引入视差,实现了三维立体显示。因此这种方法被称为补色偏振体视。介绍了该方法的基本原理,并详细叙述了用PHOTOSHOP软件制作补色偏振立体图对的方法。     

Influence of relaxation effects on probabilities of the 2s2p35S2－2s22p2 3P1，2 intercombination transitions in NII

Transition probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} intercombination transitions in NII have been calculated by using a large-scale multiconfiguration Dirac－Fock method. In the calculation the most important effects of relativity, correlation, and relaxation are considered. From the calculated transition probabilities, the lifetime of the 2s2p^3 {}^5S_2 metastable state is derived. The result is in excellent agreement with the latest experimental result. In the meantime the influence of anomalously strong relaxation effects on probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} lines in NII have been found.     

Synthesis of tumor-associated glycopeptide antigens for the development of tumor-selective vaccines

In contrast to normal cells, the glycoprotein profile on epithelial tumor cells is distinctly altered. Due to an incomplete formation of the glycan side-chains resulting from a premature sialylation, additional peptide epitopes become accessible to the immune system in mucin-type glycoproteins on tumor cells. These tumor-associated structure alterations constitute the basis for a selective immunological attack on cancer cells. For the construction of immunostimulating antigens, glycopeptide partial structures from the mucins MUC1 and MUC4 carrying the tumor-associated sialyl-T(N), alpha2,6-sialyl-T and alpha2,3-sialyl-T antigens have been synthesized. Employing different linkers such as the allylic HYCRON or the fluoride-sensitive PTMSEL anchor, the antigenic glycopeptide structures were constructed on the solid phase utilizing pre-assembled glycosyl amino acid building blocks prepared in solution by convergent chemical or chemoenzymatic strategies. The proliferation of cytotoxic T cells has been induced applying a construct composed of a sialyl-T(N) MUC1-glycopeptide conjugated with a tetanus toxin T cell peptide epitope.     

Organosoluble and transparent polyimides derived from alicyclic dianhydride and aromatic diamines

Organosoluble polyimides were synthesized with the alicyclic dianhydride 1,8‐dimethylbicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride and aromatic diamines. The polyimides possessed good solubility both in strong dipolar solvents and in common solvents; the thermal decomposition temperature of the polyimides exceeded 420 °C. Strong and flexible films of the polyimides, with the cutoff of ultraviolet–visible absorption lower than 310–320 nm, exhibited good features as the alignment layers for nematic liquid crystals with pretilt angles of 1.5–2.9°. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 110–119, 2002     

Synthesis of monodispersed organic-inorganic hybrid spheres

This paper describes the attempt to prepare a new group of monodispersed silica-polymer hybrid particles, which consists of silica and amide polymer: poly(vinylpyrrolidone) (PVP) and poly(2-ethyloxazoline) (POXZ). Preparation method is based on the growth of hybrid seeds by the addition of TEOS-polymer solution.Monodispersed PVP-silica hybrid particles of 1.24 µm in diameter were prepared by growing the hybrid seeds of 0.54 µm by the addition of TEOS-PVP solution with ammonia catalyst. In the case of POXZ-silica particles, addition of TEOS-POXZ solution to the solution containing 0.54 µm seeds resulted in monodispersed POXZ-silica hybrid particles and four times repetition of the addition for particle growth gave the hybrid particles of the diameter of 1.6 µm.Improvement of mechanical properties of hybrid particles was observed when the particles were heated at 100 200°C.     

SO4●－自由基氧化酪氨酸反应中的溶剂效应

研究了水-乙腈混合溶液中SO4●－自由基氧化酪氨酸的反应.实验结果表明，SO4●－自由基氧化酪氨酸的反应机制不因乙腈的加入而改变，但所产生的瞬态粒子的动力学行为受到较大影响.随介质中乙腈体积分数的增加，SO4●－的衰变速率减慢而酪氨酸中性自由基（TyrO●）的衰变速率加快.我们认为这两种自由基所呈现出来的相反的溶剂效应是由于其所带电荷的不同.随介质中乙腈体积分数的增加，SO4●－氧化酪氨酸的反应速率减慢.这一实验结果意味着，在有机溶剂存在的情况下TyrO●/ TyrOH的氧化还原电势可能发生了变化，从而旁证了关于TyrO●/ TyrOH的氧化还原电势因酪氨酸从游离状态变到肽或蛋白质中而发生变化的推测.     

Co—Mo／MgO—Al2O3水煤气耐硫变换催化剂失活的研究

利用Ｘ－射线衍射，扫描电镜，拉曼光谱，等离子发射光谱和比表面测定等方法研究了不同状态下失活及新鲜催化剂的结构，杂种类及含量。结果表明，超温使催化剂晶化明显，制备方法对催化剂结构有直接影响，再生使其强度降低，条形催化剂比较容易粉化，无机杂质是次要的失活原因。     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002