首次穿过边界概率及其在金融中的应用

本文把数学和管理科学有机结合,为数学应用提出问题,得出新结果,推广了J.Michel Harrison(1985)[1]第43页的命题27,并给出了在金融中的应用.     

ALICE实验中光子谱仪的触发选判机制的模拟研究

对ALICE实验光子谱仪的触发选判机制进行了模拟研究, 内容包括: 1) 对光子谱仪的能量重建性能进行了研究, 通过计算机模拟检验光子谱仪探测器对大横动量范围的入射粒子的能量重建性能; 2) 对光子谱仪探测器的事件触发效率进行了研究, 通过计算机模拟分析触发阈值的选取并计算触发效率; 3) 对光子谱仪探测器的事件触发频率进行了研究, 通过计算机模拟对p-p和Pb-Pb两种碰撞模式下的触发频率分别进行了估算和讨论.     

Synthesis and photochemistry of a new class of photocleavable protein cross-linking reagents

A new series of photocleavable protein cross-linking reagents based on bis(maleimide) derivatives of diaryl disulfides have been synthesised. They have been functionalised with cysteine and transient absorption spectra for the photolysis reaction have been recorded by using the pump-probe technique with a time resolution of 100 femtoseconds. Photolysis of the disulfide bond yields the corresponding thiyl radicals in less than a picosecond. There is a significant amount of geminate recombination, but some of the radicals escape the solvent cage and the quantum yield for photocleavage is 30 % in water.     

Parametric analysis of kinetic models. XIV. Autocatalytic trigger and oscillator in a flow system

In a flow catalytic reactor with an autocatalytic trigger as a kinetic subsystem, the conditions have been found, in which oscillations appear. Some peculiarities of the kinetic model dynamics, where the kinetic subsystem is an autocatalytic oscillator, are investigated.     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

激光触发SF6-N2混合气体开关的数值模拟

 在气体放电物理的基础上，对SF₆和N₂采用双光子电离模型，对碳氢化合物的光电离采用3能级模型，并考虑了混合气体的热电离和激光对气体的欧姆加热作用，建立了激光触发SF₆-N₂混合气体开关的数值模型，模拟了激光触发SF6-N2混合气体多级间隙开关实验。激光触发延迟时间的计算值与实验结果符合较好。理论计算表明：激光触发SF₆-N₂混合气体间隙开关的延迟时间随SF₆含量的增加呈上升趋势，而随激光脉冲能量、充气压力等的上升呈下降趋势。     

电磁干扰下时间分辨测量系统信号外触发技术

在实验的基础上给出了束参数时间分辨测量系统的实验布局和特点,分析高压电磁干扰对直线感应加速器中时间分辨测量系统外触发性能的影响和变化规律;进一步探讨系统高压电磁干扰后的抑制措施。针对电磁空间干扰情况,主要通过采用光纤传输控制信号的措施,能很好地传输窄脉冲,信号延时抖动小于2ns,达到了高速信号的可靠传输要求,采用嵌入式控制器既解决了抗电磁干扰的要求,也满足了束参数时间分辨测量系统的使用要求。     

Detection of B-FSK signals using schmidt trigger

Possibility to record B-FSK signals with use of stochastic resonance is studied. A Schmidt trigger is employed as bistable stochastic resonator. A digital model of the detector is proposed and quantitative results are obtained by means of simulations. Dependence of the probability of correctly detected bits on the added noise power and on the low-pass filter cutoff frequency is studied. Also the stability of the detector with respect to channel-introduced phase shifts is revealed.     

针板型触发电晕稳定开关的特性

 为了验证在空气状态下电晕稳定开关的重复频率特性,对自行研制的盘式触发三电极电晕稳定开关的工作特性进行了实验研究,并分析了实验结果。结果表明,在空气状态下,开关具有良好的触发特性,开关抖动和导通时延最小可以分别控制在4, 36 ns;同时,还可以通过减小触发间隙,进一步减小开关的导通时延和增加开关的稳定性。