Super-resolution in time-reversal focusing on a moving source

This paper presents a detailed analysis of time-reversal experiments involving a moving point source that emits a pulse. Different configurations are addressed with full-aperture or partial-aperture time-reversal mirrors and with subsonic or supersonic sources. Doppler effects and lack of source-receiver reciprocity significantly affect the time-reversal refocusing when the velocity of the source becomes comparable as or larger than the speed of propagation. The main result is that refocusing can be enhanced when the velocity of the source becomes close to the speed of propagation compared to the classical diffraction-limited refocusing properties when the source does not move, and this super-resolution effect can be quantified by simple and explicit formulas.     

Long-term super-resolution imaging of mitochondrial dynamics

Monitoring dynamics of mitochondria has become an essential approach to explore the function of mitochondria in living cells with the emergence of super-resolution fluorescence microscopy. However, long-term super-resolution imaging of mitochondria is still challenging due to the lack of photostable fluorescent probes and stable mitochondria-specific markers which are not affected by the changes of mitochondrial membrane potential. Here, we introduce a method for long-term imaging mitochondrial dynamic through the SNAP-tag fluorogenic probe based on 4-azetidinyl-naphthalimide derivatives. Using structured illumination microscopy (SIM), we observed the fusion and fission of mitochondria over a course of 16 min at 109 nm resolution. Furthermore, the interactions as well as fusion between mitochondria and lysosomes were studied during mitophagy at the nanoscale. Convincingly, the combination of SNAP-tag fluorogenic probes and super-resolution fluorescence microscopy will offer a new way to monitor dynamic mitochondria in living cells.     

A lateral super-resolution differential confocal technology with phase-only pupil filter

In order to achieve a higher lateral resolution required for ultraprecision measurement of microstructural workpieces, phase-only pupil filtering differential confocal microscopy (PFDCM), a new approach is proposed based on the differential confocal microscopy (DCM), which uses a three-zone phase-only pupil filter with lateral super-resolution capability obtained through optimized design to change the distribution of DCM three-dimensional point spread function, so that the DCM lateral resolution is therefore significantly improved while its axial resolution is slightly improved. Preliminary experimental comparison and analyses indicate that, the lateral and axial resolutions of PFDCM are better than 0.2 μm and 2 nm, respectively, when wavelength of incidence laser beam , numerical aperture of measuring lens NA=0.85, and lateral spot size with a three-zone phase-only pupil filter G_T=0.65. It is therefore concluded that PFDCM is a new approach to further improvement of lateral resolution in laser probe measurement systems.     

An adaptive super-resolution method based on regional pixel information and ringing artifacts suppression

Multi-frame image super-resolution (SR) aims to utilize information from a set of low-resolution (LR) images to compose a high-resolution (HR) one. In this paper, a novel multi-frame image super-resolution algorithm is proposed based on regional pixel information and ringing artifacts suppression. Firstly, a new regularization term which adopts Regional Adaptive Weight Coefficients (RAWC) is produced to keep edges and flat regions. After detailed analysis, an iterative process is given for image reconstruction. Then an adaptive term according to the local variance of iterative correction image is designed to evaluate the ringing artifacts. Finally, the original iteration is updated by adding the restraint term for better visual effects and lower noise of reconstructive HR image. Thorough experimental results show the proposed algorithm is effective for SR reconstruction and ringing artifacts suppression.     

Long-term super-resolution imaging of mitochondrial dynamics

Monitoring dynamics of mitochondria has become an essential approach to explore the function of mitochondria in living cells with the emergence of super-resolution fluorescence microscopy. However, long-term super-resolution imaging of mitochondria is still challenging due to the lack of photostable fluorescent probes and stable mitochondria-specific markers which are not affected by the changes of mitochondrial membrane potential. Here, we introduce a method for long-term imaging mitochondrial dynamic through the SNAP-tag fluorogenic probe based on 4-azetidinyl-naphthalimide derivatives. Using structured illumination microscopy (SIM), we observed the fusion and fission of mitochondria over a course of 16 min at 109 nm resolution. Furthermore, the interactions as well as fusion between mitochondria and lysosomes were studied during mitophagy at the nanoscale. Convincingly, the combination of SNAP-tag fluorogenic probes and super-resolution fluorescence microscopy will offer a new way to monitor dynamic mitochondria in living cells.     

Donor-Acceptor Typed AIE Luminogens with Near-infrared Emission for Super-resolution Imaging

Aggregation-induced emission(AIE)luminogens(AIEgens)with high brightness in aggregates exhibit great potentials in biological imaging,but these AIEgens are seldom applied in super-resolution biological imaging,especially in the imaging by using the structural illumination microscope(SIM).Based on this consideration,we synthesized the donor-acceptor typed AIEgen of DTPA-BTN,which not only owns high brightness in the near-infrared(NIR)emission region from 600 nm to 1000 nm(photoluminescence quantum yield,PLQYs=11.35%),but also displays excellent photo-stability.In addition,AIE nanoparticles based on 4,7-ditriphenylamine-[1,2,5]-thiadiazolo[3,4-c]pyridine(DTPA-BTN)were also prepared with highly emissive features and excellent biocompatibility.Finally,the developed DTPA-BTN-based AIE nanoparticles were applied in the super-resolution cellular imaging via SIM,where much smaller full width at half-maximum values and high signal to noise ratios were obtained,indicating the superior imaging resolution.The results here imply that highly emissive AIEgens or AIE nanoparticles can be promising imaging agents for super-resolution imaging via SIM.     

时域压缩合成孔径超分辨水声成像算法

提出一种针对水下稀疏目标的时域压缩合成孔径声呐成像方法(TC-SAS),实现了水声目标高分辨实时成像。通过多子阵的孔径合成,在时域上构造出成像网格格点到有效孔径内逐帧阵列的格林函数,并给出成像区域散射强度到数据域的映射矩阵;然后利用该区域空域稀疏的先验知识,通过正交匹配追踪的稀疏重构方式,解算出成像区域散射系数矩阵,实现了稀疏目标高分辨成像.同时,针对线性调频信号提出数据缩减的方法,通过对观测数据和字典矩阵同时脉压后截取,减小了数据规模;进一步结合二维矩阵数表查表的方法,以空间换时间,实现了区块实时成像。数值仿真以及湖试试验表明,所提算法能分辨出传统的时延求和算法难以分辨的目标,并且在图像清晰度指标上平均提升4.9 dB.改善了合成孔径声呐的成像质量.     

Infrared chemical imaging: Spatial resolution evaluation and super-resolution concept

Chemical imaging systems help to solve many challenges in various scientific fields. Able to deliver rapid spatial and chemical information, modern infrared spectrometers using Focal Plane Array detectors (FPA) are of great interest. Considering conventional infrared spectrometers with a single element detector, we can consider that the diffraction-limited spatial resolution is more or less equal to the wavelength of the light (i.e. 2.5-25 μm). Unfortunately, the spatial resolution of FPA spectroscopic setup is even lower due to the detector pixel size. This becomes a real constraint when micron-sized samples are analysed. New chemometrics methods are thus of great interest to overcome such resolution drawback, while keeping our far-field infrared imaging spectrometers. The aim of the present work is to evaluate the super-resolution concept in order to increase the spatial resolution of infrared imaging spectrometers using FPA detectors. The main idea of super-resolution is the fusion of several low-resolution images of the same sample to obtain a higher-resolution image. Applying the super-resolution concept on a relatively low number of FPA acquisitions, it was possible to observe a 30% decrease in spatial resolution.     

Microstructure, optical and static recording properties of AgOx film, and near-field simulation of sub-wavelength aperture based on the AgOx marks’ formation

Structures, spectra and surface topographies of as-deposited and annealed AgO_x films have been investigated by an X-ray diffractometer, a spectrophotometer and an atomic force microscopy (AFM). X-ray diffraction and spectrum results show that the as-deposited AgO_x films with high oxygen ratios (x≥0.5) are in amorphous states and Ag crystalline particles will separate out after annealed. AFM results show that the film surface will become much rougher and film thickness will increase greatly after annealed due to the decomposition of AgO_x with release of oxygen. Static recording results show that two microstructures of the recording marks can be produced: one is the bubble mark at a low recording power and the other is the rupture bubble with an ablated aperture (hole) in the center at a high recording power. Based on the formation of rupture bubble marks, the near-field optical distribution of a focused Gaussian laser beam through a sub-wavelength aperture (200 nm in diameter) has been simulated using finite-difference-time-domain (FDTD) method. Results show that the spot size can be greatly squeezed with still highly transmitted intensity, which may lead to the super-resolution readout.     

盲目反卷积光谱图超分辨复原算法

反卷积是实现光谱图超分辨复原的重要手段,与常规反卷积相比,盲目反卷积具有不需要预先准确获取卷积核函数的优势。着眼于充分利用光谱信号的特点和已有的光谱图反卷积成果,详细讨论了空域迭代盲目反卷积方法用于光谱图反卷积时的算法实现问题,并在分析光谱图卷积退化过程的基础上,针对光谱图反卷积算法特点,提出了光谱图卷积退化简化计算模型和最小二乘高斯拟合模型,以解决算法中相应的计算问题。基于Matlab平台的仿真表明,对于所用的高斯型谱线和点扩散函数,空域迭代盲目反卷积算法效果良好,在信噪比为50 dB时,分辨率提高约30％。