A new rule of vibration sampling for predicting acoustical radiation from rectangular plates

Structural surface velocity distribution is often used to predict structural borne sound radiation. However the sampling interval of velocity should be chosen carefully to increase the prediction accuracy and to reduce the system cost. In this paper, several factors affecting the sampling interval are theoretically analyzed and discussed for a vibrating baffled rectangular plate. A new rule for the determination of the sampling interval is formulated. Using this rule, the results from both numerical simulations and experiments may be explained well.     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

Investigation of annealing effects on the structural, magnetic and transport properties of Co/GaAs(0 0 1) thin films

Present paper deals with the structural, magnetic and transport studies of as-deposited as well as annealed Co/GaAs(0 0 1) thin film at different temperatures. The X-ray diffraction measurements show oriented growth of as-deposited Co film in the hcp (0 0 2) direction. However, the sample annealed at higher temperatures shows formation of ternary Co₂GaAs phase at the interface. Corresponding magnetic and transport measurements show decrement in magnetization and resistivity with annealing temperatures. The observed reductions in magnetization and resistivity values are mainly attributed to the formation of ternary Co₂GaAs phase at the interface.     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.     

最大似然方法和Bayes方法在结构方程模型分析中的讨论(英文)

本文通过模拟研究,讨论了最大似然方法和Bayes方法在分析结构方程模型中的相似点和不同之处。     

InAs/GaSb/AlSb resonant tunneling spin device concepts

We discuss device concepts for creating spin-polarized current sources without external magnetic fields, using non-magnetic 6.1 Å semiconductor resonant tunneling structures. Spin filters, spin pumps, and spin transistors that exploit structural and bulk inversion asymmetries will be examined.     

Structural properties and tractability results for linear synteny

The syntenic distance between two species is the minimum number of fusions, fissions, and translocations required to transform one genome into the other. The linear syntenic distance, a restricted form of this model, has been shown to be close to the syntenic distance. Both models are computationally difficult to compute and have resisted efficient approximation algorithms with non-trivial performance guarantees. In this paper, we prove that many useful properties of syntenic distance carry over to linear syntenic distance. We also give a reduction from the general linear synteny problem to the question of whether a given instance can be solved using the maximum possible number of translocations. Our main contribution is an algorithm exactly computing linear syntenic distance in nested instances of the problem. This is the first polynomial time algorithm exactly solving linear synteny for a non-trivial class of instances. It is based on a novel connection between the syntenic distance and a scheduling problem that has been studied in the operations research literature.     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.