Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.     

高压下液态Ag-20 at%Ge合金的凝固及密排六方亚稳相的形成

 利用高压淬火方法，在液态Ag-20at%Ge合金的凝固过程中，对比液态急冷低四个数量级的冷却速率得到了单相密排六方结构亚稳相，其点阵参数为a=0.289 8 nm，c=0.470 8 nm，c/a=1.625。     

基于单片机控制的实验线路故障诊断系统

介绍了基于单片机控制技术的强电实验线路故障自动诊断系统的结构及功能,阐述了系统硬件设计、软件设计的基本原理．     

Quantitative study on selective stacking of zwitterions in large-volume sample matrix by moving reaction boundary in capillary electrophoresis

The paper advanced the theoretical procedures for quantitative design on selective stacking of zwitterions in full capillary sample matrix by a cathodic-direction moving reaction boundary (MRB) in capillary electrophoresis (CE) under control of electroosmotic flow (EOF). With the procedures, we conducted the theoretical computations on the selective stacking of two test analytes of L-histidine (His) and L-tryptophan (Trp) by the MRB created with 30 mM pH 3.0 formic acid-NaOH buffer and 2-80 mM sodium formate. The results revealed the following three predictions. At first, the MRB cannot stack His and Trp plugs if less than 12.5 mM sodium formate is used to form the MRB and prepare the sample matrix. Second, the MRB can stack His and/or Trp sample plugs completely if higher than 50 mM sodium formate is chosen to form the MRB. Third, the MRB can only focus His plug completely, but stack Trp plug partially if 20-50 mM sodium formate is used; this implied the complete MRB-induced selective stacking to His rather than Trp. All the three predictions were quantitatively proved by the experiments. With great dilution of sample matrix and control of EOF, controllable, simultaneous and MRB-induced selective stacking and separation of zwitterions were achieved. The theoretical results hold evident significances to the quantitative design of selective stacking conditions and the increase of detection sensitivity of zwitterions in CE. In addition, the control of EOF by cetyltrimethylammonium bromide (CTAB) can evidently improve the stacking efficiency to both His and Trp.     

Analysis of the disaccharides derived from hyaluronic acid and chondroitin sulfate by capillary electrophoresis with sample stacking

CE conditions for monitoring the unsaturated disaccharides of hyaluronic acid (di-HA) and chondroitin sulfate (di-CS) using an alkaline tetraborate buffer, electrokinetic sample injection, and UV absorption detection at 232 nm are reported. Separations were performed in an uncoated fused-silica capillary having reversed polarity and reversed electroosmosis generated with the addition of CTAB to the buffer. The influence of various separation parameters, including the concentration of CTAB, buffer pH, concentration of tetraborate, and applied voltage, on the resolution of the two disaccharides was investigated. Baseline separation was obtained with 25 mM tetraborate at pH 10.0 and having 0.05 mM CTAB. Chloride and phosphate in the sample are beneficial for the stacking of the disaccharides, with di-HA forming a much sharper peak than di-CS. Using samples prepared in 25 mM Tris-HCl (pH 7.5) and electrokinetic injection at the cathode at -10 kV for 40 s, linear relationships between the corrected peak area and the concentration of the disaccharides have been found in the ranges of 1.0-400.0 and 0.1-1.0 microg/mL (0.2-1.0 microg/mL for di-CS), with correlation coefficients being >0.9933 in all cases. The RSDs of detection times and corrected peak areas were between 1.13-1.24 and 1.57-2.13%, respectively. Applied to human serum samples that were prepared by ethanol precipitation and depolymerization of the two polysaccharides with chondroitinase ABC reveals comigration of endogenous compounds with di-HA and a sample-dependent detection time. The di-HA content in the serum sample can be estimated via subtraction of the blank peak that is obtained without enzymatic hydrolysis.     

A combined diffraction and dielectric properties investigation of Ba3MnNb2O9 complex perovskites

A combined synthesis, diffraction and dielectric properties investigation of the dependence (and effect) of Mn²⁺/Nb⁵⁺ ordering in Ba₃MnNb₂O₉ (BMN) upon annealing atmosphere and processing conditions has been carried out. Annealing in different atmospheres was not found to significantly alter either nominal stoichiometry or structure type. The obtained structure type (disordered metrically cubic or ordered trigonal) as well as the measured electrical properties (in particular, the dielectric loss) were, however, found to be sensitive to the synthesis route. Samples obtained via solid-state reaction were found to be predominantly of 1:2 Mn²⁺/Nb⁵⁺ ordered, trigonal structure type whereas samples obtained via an aqueous solution route were found to be of a Mn²⁺/Nb⁵⁺ ‘disordered’, metrically cubic structure type. All solid-state synthesized samples showed reasonable dielectric properties. The microwave dielectric constant and dielectric quality factor, Q, at 8 GHz of an as-synthesized BMN sample were 38 and 100, respectively. By contrast, the dielectric loss of the metrically cubic, Mn²⁺/Nb⁵⁺ ‘disordered’ samples obtained via an aqueous solution synthesis process were significantly worse.     

Sample-stacking techniques in non-aqueous capillary electrophoresis

In sample-stacking techniques, the detection limit cannot be improved by simply increasing the length of the sample solution, because the individual electrophoretic parameters must be optimized. In an attempt to increase the amount of sample injected, as well as to focus them onto a small zone, two novel methods are proposed. One of these employs an "ultra-high conductivity zone", which was inserted between the sample zone and background solution to build an unequal conductivity gradient. The other employs a "low temperature bath". A portion of the capillary (near the junction between the sample solution and the background solution) was immersed in a low temperature bath, which served as a "pseudo-high-conductivity zone" due to the fact that conductivity would increases when the temperature is decreased. As a result, a large volume of sample injection can be achieved. Using 3,4-methylenedioxymethamphetamine as a model compound, the detection limit was determined to be 1.6 x 10(-6) M (S/N = 3) by means of normal non-aqueous capillary electrophoresis (NACE). This could be improved to 3.0 x 10(-8) M, 4.8 x 10(-9) M and 5.0 x 10(-9) M, respectively, when the normal stacking, ultra-high conductivity zone NACE-stacking and the low-temperature zone NACE-stacking methods were applied.     

Structural Studies of Bis(cyclopentadienyl)molybdenum‐Amino Acid Complexes

The crystal structures of molybdocene‐amino acid compounds of the type [Cp₂Mo^IV(κN, κO‐AA)]⁺Cl^—·xH₂O with AA = D ‐phenylalaninato (x = 1.5), DL ‐leucinato (x = 2) and DL ‐valinato (x = 1) have been determined (Cp = η⁵‐C₅H₅). The compounds feature an almost planar, five‐membered chelate ring of the aminocarboxylate moiety (deprotonated amino acid) with the molybdenum atom. In the phenylalaninato complex π‐stacking between the phenyl rings is found. The complexes were proven kinetically stable at pH < 1 for at least 24 h.     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.