Modification of the surface state of rough substrates by two different varnishes and influence on the reflected light

Modification of the visual appearance when a rough surface is covered by a varnish is mostly attributed to the levelling of the substrate surface, which depends on the molecular weight of the varnish. The topography of varnished surfaces, however, has never been measured directly. Surfaces of varnishes applied over glass substrates of varying roughness were studied, therefore, using mechanical profilometry. Two different varnishes made with a low and a high molecular weight resin were studied. Both varnishes lower the r.m.s. roughness of the substrates and filter the high spatial frequencies. These results are amplified for the varnish containing the low molecular weight resin. The light reflected by the varnished samples is modelled from these topographical data. Its angular distribution, calculated from the probability density of slopes is presented, taking into account separately the air/varnish and the varnish/substrate interfaces. These analyses are presented in a back-scattering configuration. They show that varnishing significantly reduces the angular width of the reflected light and that this effect is magnified for the low molecular weight resin. Modelling furthermore shows that the influence of the roughness of the varnish/substrate interface is negligible in the total reflected light.     

Research of spatial resolution in external electro-optic probing

A new method, based on zero point of longitudinal electric field, was used to determine the spatial resolution of external electro-optic (EO) probing equipment. Considering the diffraction of Gauss beam, the result of external EO probing was simulated which was in accordance with the experiment. A spatial resolution <1 μm was demonstrated initially in our equipment using 650 nm laser diode as probe beam and semi-insulating GaP as probe tip.     

数字全息图变频采样研究

根据Whittaker-Shannon抽样定理,对菲涅耳全息图进行变频率采样,保证整个全息图各部分采样频率为该处相应空间频率的两倍,从而完全消除数字全息图由于采样冗余而带来全息图的信息冗余.并且,对变频采样后的全息图进行线性插值恢复即可获得良好的再现像质.实验和理论均证明了该方法的有效性和可行性,为全息图的信息存贮与传输提出一条新的思路.     

AGSM光束在自由空间中的传输

 用矩阵方法研究了有扭曲的各向异性高斯-尔模型（AGSM）光束通过自由空间的传输。给出了光束参数的解析传输公式和详细数值计算结果，说明AGSM光束的传输特性以及扭曲因子和空间相关长度的影响。     

介质的非均匀性对高次谐波影响的研究

讨论了气体介质的非均匀性对飞秒激光高次谐波产生过程的可能影响.计算结果表明,采用喷阀技术所提供的气体介质的密度梯度和气体原子运动速度的影响很小,不会产生实验上可观测的效果.这一结果支持了喷气靶在高次谐波产生中的广泛应用 关键词： 高次谐波 气体介质 各向异性 飞秒激光     

短脉冲强激光在稀薄等离子体中传播时的电磁类孤立子

 采用二维粒子模拟方法，研究了短脉冲强激光在稀薄等离子体中传播时电磁类孤立子的产生和时空演化过程。通过分析电磁场与等离子体波的非线性能量交换和激光场的频率谱结构等，给出了电磁类孤立子形成的基本物理图像，讨论了等离子体参数对电磁类孤立子形成的影响。模拟结果表明：类孤立子的形成是由于局部电磁波振荡频率减小至等离子体频率引起的，初始等离子体密度越高越容易形成空间局域结构。     

An unknotting theorem for delta and sharp edge‐homotopy

Two spatial embeddings of a graph are said to be delta (resp. sharp) edge‐homotopic if they are transformed into each other by self delta (resp. sharp) moves and ambient isotopies. We show that any two spatial embeddings of a graph are delta (resp. sharp) edge‐homotopic if and only if the graph does not contain a subgraph which is homeomorphic to the theta graph or the disjoint union of two 1‐spheres, or equivalently G is homeomorphic to a bouquet. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spatial decay in a double diffusive convection problem in Darcy flow

This paper deals with a model of time-dependent double diffusive convection in Darcy flow. In particular it is concerned with the spatial decay of solutions when the flow is confined to a semi-infinite cylinder. Decay bounds for an energy expression are derived.     

Elliptic integral solutions of spatial elastica of a thin straight rod bent under concentrated terminal forces

In this article, we solve in closed form a system of nonlinear differential equations modelling the elastica in space of a thin, flexible, straight rod, loaded by a constant thrust at its free end. Common linearizations of strength of materials are of course not applicable any way, because we analyze great deformations, even if not so large to go off the linear elasticity range. By passing to cylindrical coordinates ρ, θ, z, we earn a more tractable differential system evaluating ρ as elliptic function of polar anomaly θ and also providing z through elliptic integrals of I and III kind. Deformed rod’s centerline is then completely described under both tensile or compressive load. Finally, the planar case comes out as a degeneracy, where the Bernoulli lemniscatic integral appears.     

用方差定义的激光束横向尺寸的测量

用方差定义的激光束横向尺寸,有着普适、简单和便于利用光学元件并行运算功能的特点.本文提出一种借助改变柱形容器内吸收液浓度来直接测量各种波长激光束横向尺寸的理论和方法.