Growth and optical characterization of organic nonlinear optical crystal: indole-3-aldehyde

The metastable zone width for the solution of organic nonlinear material: indole-3-aldehyde (IA) has been determined for the various solvents of acetone, methanol and ethyl acetate and the corresponding IA crystals have been grown by temperature lowering technique. The surface analysis on different planes of the grown crystals has been carried out. The range of transmission and powder second harmonic generation efficiency of IA have been reported.     

液体顶空-气相色谱法测定食品接触苯乙烯聚合物中单体及溶剂残留

提出了液体顶空-气相色谱法测定食品接触苯乙烯聚合物中残留单体及溶剂的方法。采用N,N-二甲基乙酰胺溶解聚合物,使其中残留单体及溶剂完全释放,并在优化的工作条件下,以基体匹配校正法绘制工作曲线,有效消除基质效应。7种分析物检出限(3S/N)在0.2～4.1mg.kg-1之间。测得方法的回收率在93.2%～103.2%之间,测定值的相对标准偏差(n=6)在1.1%～5.6%之间。     

Choline chloride – Urea deep eutectic solvent an efficient media for the preparation of metal nanoparticles

Metal nanoparticles are nanosized structures that have different potential applications in biological, chemical, medical, and agricultural fields because of their exotic characteristics. Their size ranges from 1 to 100 nm. Metal nanoparticles are either purer forms of metals (eg: Gold, Silver, Copper, Iron, etc.) or their compounds (eg: sulfides, hydroxides, oxides, etc.). Ionic liquids are generally used in the extraction of nanoparticles but they are challenging because of their indigent bio-degradability, bio-compatibility, and sustainability. So Deep Eutectic Solvent (DES) is reported as an alternative to ionic liquids in the formation of nanoparticles. The DESs are a complex of quaternary ammonium salts and hydrogen donors or metal salt. DESs contain higher non-symmetric ions which have lower lattice energy and hence they have a lower melting point. This research utilizes a novel DES (choline chloride – urea) as an effective solvent to produce mercuric sulfide (HgS), zirconium oxide (ZrO), manganese oxide (MnO), and copper oxide (CuO) nanoparticles. As a result, the production of these metal nanoparticles using Choline Chloride (C₅H₁₄ClNO) – Urea DES can be treated as a promising way in chemical manufacturing. The nanoparticles have been analyzed using Ultra Violet Spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Energy Dispersive X-Ray Analysis (EDAX).     

Quantitative Structure-Toxicity Relationships Using Tops-Mode. 2. Neurotoxicity of a Non-Congeneric Series of Solvents

Abstract

Neurotoxicities of a series of solvents in rats and mice have been modeled by means of the TOPS-MODE approach. Two quantitative structure-toxicity relationship (QSTR) models were obtained explaining more than 80% of the variance in the experimental values of neurotoxicity of 45 solvents. Only one compound was detected as statistical outlier for these models. In contrast, previous models explained less than 60% of the variance in this property for 44 solvents. Finally, the contributions to neurotoxicity in rats and mice for a series of structural fragments were found. Structural characteristics of chlorinated fragments responsible for their different neurotoxicities were analyzed. The differences in neurotoxic behavior of some fragments in rats and mice were also analyzed, which could give insights on the toxicological mechanism of action of solvents studied.     

Solvent dependent dimercaptothiadiazole monolayers on gold electrode for the simultaneous determination of uric acid and ascorbic acid

Dimercaptothiadiazole compound, 2,5-dimercapto-1,3,4-thiadiazole (DMcT) forms ‘thin’ monolayers on Au electrode when it was adsorbed from methanol, ethanol or DMSO solutions while it forms ‘thick’ layers on Au electrode from an aqueous solution under identical experimental conditions. Thick DMcT layers formed from aqueous solution effectively blocks the redox reaction of couple in contrast to thin DMcT monolayers. The monolayer thickness did not vary when structurally related DMcT compounds, 5-methyl-1,3,4-thiadiazole-2-thiol or 5-amino-1,3,4-thiadiazole-2-thiol was adsorbed from aqueous and non-aqueous solutions. This indicates that the presence of two thiol groups in DMcT plays a crucial role in the formation of thick and thin DMcT layers on Au electrode when it was adsorbed from aqueous and non-aqueous solutions. Methanol, ethanol, or DMSO solution of DMcT is considered as strong acid because these solvents are able to deprotonate DMcT into DMcT⁻ and thus thin monolayers formed on Au electrode. The deprotonating ability of these solvents was further verified from the observed absorption spectrum characteristic of DMcT⁻ species. On the other hand, an aqueous solution of DMcT is less acidic due to weak deprotonation of DMcT by water and thus DMcT forms thick layer on Au electrode. Interestingly, thin DMcT monolayers formed from non-aqueous solvents separates the voltammetric signals of uric acid and ascorbic acid while thick DMcT layers formed from aqueous solution fails to separate them.     

Polyynes and cyanopolyynes synthesis from the submerged electric arc: about the role played by the electrodes and solvents in polyynes formation

The products of the electric arc between graphite electrodes have been investigated by high performance liquid chromatography-diode-array detector (HPLC-DAD) analysis in various media: distilled water, liquid nitrogen, methanol, ethanol, n-hexane and benzene. In distilled water, hydrogen capped polyynes H-(CC)_n-H were the unique products demonstrating that carbon is supplied by the graphite electrodes while hydrogen is supplied by the solvent plasmalysis (in this case water plasmalysis). Arcing graphite electrodes in liquid nitrogen produces cyanopolyynes: NC-(CC)_n-CN demonstrating that in this case the end groups of the polyyne chains are supplied by molecular nitrogen plasmalysis caused by the electric arc. Graphite arcing in methanol and ethanol produces very clean solutions (by-products negligible or absent) of hydrogen-capped polyynes with C₈H₂ as the main product accounting for more than 70 mol percent of the total polyyne concentration. By replacing graphite electrodes with titanium electrodes in methanol or in ethanol, polyynes are not formed at all; only trace amounts of polycyclic aromatic hydrocarbons (PAHs) were detected. When arcing with graphite electrodes is conducted in n-hexane or in benzene, polyyne formation is accompanied by a significant production of PAH, especially in benzene. These results have been rationalized in terms of carbonization or coking tendency of a given solvent. The effect of using titanium electrodes in place of graphite electrodes has been investigated also in n-hexane and in benzene as well as the effects of very high electric current intensity employed to ignite and sustain the submerged electric arc.