GaAsN/AlAs/AlGaAs double barrier quantum wells grown by molecular beam epitaxy as an alternative to infrared absorption below 4 μm

In this work, we report on the design, growth and characterization of GaAsN/AlAs/AlGaAs double barrier quantum well infrared detectors to achieve intraband absorption below 4 μm. Due to the high effective mass of N-dilute alloys, it is common for these N-containing double barrier quantum well structures to have more than one bound state within the quantum well, enabling the possibility of achieving multispectral absorption from these confined levels to the quasi-bound. Based on a transfer matrix calculation we will study the influence of the potential parameters, in particular the well width and the introduction of a GaAs spacer layer in between the N-well and the AlAs barriers. We will compare the case in which there are two confined levels with the case in which only one level is bound, like in the conventional AlGaAs/AlAs/GaAs structures. On the basis of the simulation, we have grown and characterized some N-containing double barrier detectors. Moreover, an optimization of the post-growth annealing treatments of the GaAsN quantum well structures has also been performed. Finally, room temperature absorption measurements of both as-grown and annealed samples are presented and analyzed.     

Solid-state Electrochemistry of Gadolinium Hexacyanoferrate Modified Electrode and Electrocatalytic Properties of Gadolinium Hexacyanoferrate

A new electroactive polynuclear inorganic compound of rare earth metal, gadolinium hexacyanoferrate (GdHCF), was prepared and characterized using the techniques of FTIR spectroscopy, thermogravimetric analysis (TG), UV-Vis spectrometry, X-ray photoelectron spectroscopy (XPS), ICP atomic emission spectroscopy, and EDX. The results of ICP atomic emission spectroscopy, EDX, and TGA indicated that the prepared GdHCF sample had a stoichiometry of NaGdFe(CN)₆·12H₂O (when GdHCF was prepared in NaCl solution). The FTIR spectrum of GdHCF showed that there were two types of water molecules in the structure of GdHCF: one was the interstitial water (5 H₂O), which resulted from the association of water due to H-bonding, and the other was water coordinated with Gd (7 H₂O). The results obtained using XPS showed that the oxidation state of Fe and Gd in the GdHCF sample was +2 and +3, respectively. GdHCF was immobilized on the surface of spectroscopically pure graphite (SG) electrode forming the GdHCF/SG electrode, and the solid-state electrochemistry of the resultant electrode was studied using cyclic voltammetry. The cyclic voltammetric results indicated that the GdHCF/SG electrode exhibited a pair of well-defined and stable redox peaks with the formal potential of E^0′=(197±3) mV. The effects of the concentration of the supporting electrolyte on the electrochemical characteristics of GdHCF were studied, and the results showed that the value of E^0′ increased linearly with the activity of the cationic ion of the supporting electrolyte (lga_Na⁺), with a slope of 54.1 mV, which may become a novel method for determining the activity of Na⁺ in solution. Further experimental results indicated that GdHCF had electrocatalytic activities toward the oxidation of dopamine (DA) and ascorbic acid (AA), and the electrocatalytic current increased linearly with the concentration of DA (or AA) in the range of 1.0–10.0 mmol·L^?1 (for DA) or 0.5–20.0 mmol·L^?1 (for AA).     

Carbon-13 NMR evidence for cocrystallization of cellulose as a mechanism for hornification of bleached kraft pulp

Solid-state ¹³C NMR spectroscopy was used to characterize a bleached softwood kraft pulp in the never-dried state and after cycles of drying and remoistening. Changes in NMR signal strengths indicated that growth of crystalline domains involved cocrystallization rather than accretion of cellulose from noncrystalline domains. A cluster of C-4 signals at 89.4 ppm, assigned to the interiors of crystalline domains, grew at the expense of C-4 signals at 84.0 and 84.9 ppm, assigned to the well-ordered surfaces of crystalline domains. Irreversible changes were not detected until the moisture content dropped below 18%. They were enhanced by a second drying/remoistening cycle, but showed little further change on subsequent cycles. The necessary conditions resembled those reported for hornification, suggesting that cocrystallization might provide a mechanism for hornification.     

Performance of a CW pumped Nd:YVO4 amplifier with kHz pulses

Until recently, simple and reliable high repetition-rate laser sources with nanosecond pulses much shorter than from conventional A-O Q-switch lasers were not available. However over the past 2 years we have developed such lasers based on proprietary fast E-O switching technology, which allows designs delivering 1 ns pulses and subnanosecond jitter for good synchronisation. The technology provides pulses with multi-kW peak power and repetition-rates to >100 kHz.Most recently, the performance of these short pulse lasers has been developed further by implementing oscillator/amplifier (master oscillator and power amplifier, MOPA) technology which increases the output to >1 W average power. Here we report on a simple model that has been used to predict the performance of the CW pumped Nd:YVO₄ amplifier used in the MOPA laser. The model is based on the well-known expressions for the saturated gain applying to laser pulses, but more usually applied to pulse-excited amplifiers. The model is shown to allow a good interpretation of the amplifier behaviour for kHz pulses and to be a useful tool for predicting the performance of the MOPA laser.     

Resonance method for IR sensing

A highly sensitive method for infrared radiation detection based on thermal resonance in an active bolometer is set forth. An active bolometer is a self-oscillating system consisting of an IR-sensitive cell in a feedback circuit of an adjustable proportional controller. The analysis of an active bolometer autonomous (dark) dynamics reveals that with a generalized gain factor A variation the system evolves from relaxation type towards oscillating and self-oscillating type. When A=A_c, where A_c is a critical value of the generalized gain factor A, the steady state loses stability through self-excited thermal oscillations. The resonance in a system weakly perturbed by IR radiation modulated at self-oscillation frequency q₀[1+exp(iω_ct)] is considered. It is shown that in a small precritical vicinity =(A−A_c)/A_c of the gain factor the amplitude of forced thermal oscillations is proportional to q₀/A_c. The D^* calculation reveals that the detection power of a passive (A=0) bolometer increases with feedback introduction by a factor of 1/||. The detection powers of feasible versions of an active bolometer are compared.     

Laser printing of nanocomposite solid-state electrolyte membranes for Li micro-batteries

The electrochemical and mechanical properties of nanocomposite solid-state electrolyte membranes deposited using a laser direct-write technique from a suspended solution comprised of an ionic liquid (1,2-dimethyl-3-n-butylimidazolium-bis-trifluoromethanesulfonylimide)-polymer (poly(vinylidene fluoride-co-hexafluoropropylene)) matrix with dispersed nano-particles (TiO₂) are reported and discussed. These laser printed nanocomposite solid-state membranes are shown to exhibit the proper electrochemical behavior for ionic liquids while maintaining the strength and flexibility of the polymer matrix. This combination of physical properties and deposition technique makes these deposited nanocomposite membranes ideally suited for use as an electrolyte/separator in Li micro-batteries. Sample Li micro-batteries using these laser printed nanocomposite membranes have been fabricated and their charge/discharge behavior tested, demonstrating the feasibility of using these nanocomposite membranes in Li micro-battery applications.     

LD泵浦固体激光器基模振荡光的场分布噪音

通过调整泵浦光直径,使得LD端面泵浦固体激光器的振荡光工作于基模.在排除高阶横模的条件下,测量了由于热透镜的不稳定引起的光场场分布的噪音.实验发现,基模振荡光的高斯半径、光束指向角都在波动,而且光斑存在畸变波动.对一个未采取抑制措施的2W连续LD端面泵浦Nd:YAG固体激光器进行了测量.结果表明,在总功率不变的情况下,激光束峰值点附近的光强波动达到6.3%;激光的高斯半径波动达到5.8%;激光的指向角波动达到0.3mrad.     

Indoor radon measurements in dwellings of four Saudi Arabian cities

An indoor radon survey of a total of 269 dwellings, with one dosimeter per house, distributed in four Saudi Arabian cities was carried out. The objective of this survey was to carry out indoor radon measurements of two cities in the Eastern Province, Khafji and Hafr Al-Batin and to compare this with two cities in the Western Province, Al-Madina and Taif. The survey provides additional information about indoor radon concentrations in Saudi Arabia. The results of the survey in these cities showed that the overall minimum, maximum and average radon concentration were 7,137 and 30 Bqm⁻³, respectively. The lowest average radon concentration (20 Bqm⁻³) was found in Hafr Al-Batin, while the highest average concentration was found in Khafji (40 Bqm⁻³).     

High resolution staring arrays answering compact MW and LW applications

This paper overviews the electro-optical and thermal performances of different types of infrared detectors manufactured by Sofradir. The detector’s fabrication processes and detector’s performance are shortly described. New staring arrays are more compact and offer system solutions required by infrared market. Special attention is directed to some reliability advantages of new dewar design. Finally, the development trends for highest resolution infrared detector are discussed. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 59570U (2005).     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.