溶胶－凝胶法制备Na_5YSi_4O_（12）及其离子导电性质

用溶胶－凝胶方法制备了钠快离子导体Ｎａ_５ＹＳｉ_４Ｏ_（１２）（简称ＮＹＳ）的纯相，应用交流阻抗谱技术测定了样品的离子电导和离子导电活化能，用扫描电子显微镜对用不同方法制备的样品烧结体表面进行了观察。与传统固相反应法制备的ＮＹＳ离子导体相比，用溶胶－凝胶方法制备的ＮＹＳ烧结体具有较好的界面效应。     

Structural Analysis of Ti And Pb Citrate Using NMR and FT-Raman Signals and Quantum Mechanics Simulations

Titanium citrate and lead and titanium citrate were prepared by polymeric precursor method in aqueous solution. This citrate was analyzed by ¹H, ¹³C NMR and gHMBC–NMR (Hetero-nuclear multiple-bond correlation) to investigate the formation of the citrate complexs and influence of the Pb²⁺ ion in this complex. These complexs were characterized by interaction between Ti⁴⁺ ion and citric acid carboxyls. Quantum mechanic simulations in level ab initio were used to study the electronic structure and natural charges (NBO) to both the complexs. Such techniques indicated the formation of an octahedral complex with an arrangement similar to Ti atom in the crystalline structure of the PbTiO₃. A study using the technique FT-Raman made possible the confirmation of the interaction among the Ti⁴⁺ and Pb²⁺ ions with the citric acid carboxyls.     

短波段光学减反膜的溶胶-凝胶法制备及性能分析

 随着大型激光器的发展，对短波段减反膜的要求日益提高，其中钕玻璃激光三倍频（355nm）的减反射成为新的技术要点。采用溶胶-凝胶工艺合成SiO₂溶胶，采用提拉镀膜法制备纳米多孔SiO₂薄膜，薄膜厚度为75nm，折射率控制在1.22，镀制在石英基底上的薄膜其355nm波长的反射率仅为0.2%。通过氨处理工艺和薄膜的表面修饰，薄膜的抗磨擦性能和疏水性能大大提高，薄膜经过蘸有灰尘、乙醇的棉花球擦洗20次和50次后，透射率最大值仅分别降低0.13% 和 0.39%，与水珠的接触角达到110°。     

Development of temporal spectroscopic properties for Xerogel matrices doped with Rhodamine 6G dye

The solid host of a laser dye modifies its spectroscopic properties with respect to its liquid host. During the Sol-Gel process the dye molecules suffer from changing their environment. Two parameters affect this matter, the change in the concentration due to the evaporation of the solvent (drying) and the caging of dye molecules inside the pores or attachment to the silica network. Rhodamine 6G absorption and fluorescence spectra with different concentrations, during Sol-Gel time processing, have been studied. Both, absorption and fluorescence spectra of the dye in the solid host, for different concentrations, show a blue-shift relative to its liquid phase.     

纳米孔莫来石陶瓷材料的制备

以正硅酸乙酯(TEOS)提供硅源、纳米氧化铝(d90=50 nm)提供铝源,通过溶胶-凝胶法与超临界干燥技术,制备了分散纳米氧化铝的SiO2气凝胶块体,所得复合气凝胶块体经1200℃、1300℃热处理后,得到了纳米孔莫来石陶瓷材料。XRD测试表明:凝胶体在1 200℃热处理后发生了莫来石化,1300℃莫来石化基本完成。压汞仪与场发射扫描电镜结果显示:凝胶块体经1 200、1 300℃热处理后,形成了具有纳米多孔结构的莫来石陶瓷材料,其骨架结构包含有200~400 nm的大孔,以及大量位于其孔壁上的6~30 nm的介孔。由于莫来石化的进行,热处理后的陶瓷材料的纳米孔结构具有更高的热稳定性。     

Ba(Zr0.3Ti0.7)O3 铁电薄膜的制备

介绍了用溶胶-凝胶法(sol-gel)在Pt/Ti/SiO2/Si衬底和石英衬底上制备Ba(Zr0.3Ti0.7)O3铁电薄膜的基本原理、工艺过程及工艺特点;Sol-gel制备的Ba(Zr0.3Ti0.7)O3铁电薄膜表面平整、厚度均匀.     

Pore Modification in Porous Ceramic Membranes With Sol-Gel Process and Determination of Gas Permeability and Selectivity

Summary: The aim of the study was to investigate the variation in total surface area, porosity, pore size, Knudsen and surface diffusion coefficients, gas permeability and selectivity before and after the application of sol-gel process to porous ceramic membrane in order to determine the effect of pore modification. In this study, three different sol-gel process were applied to the ceramic support separately; one was the silica sol-gel process which was applied to increase porosity, others were silica-sol dip coating and silica-sol processing methods which were applied to decrease pore size. As a result of this, total surface area, pore size and porosity of ceramic support and membranes were determined by using BET instrument. In addition to this, Knudsen and surface diffusion coefficients were also calculated. After then, ceramic support and membranes were exposed to gas permeation experiments by using the CO₂ gas with different flow rates. Gas permeability and selectivity of those membranes were measured according to the data obtained. Thus, pore surface area, porosity, pore size and Knudsen diffusion coefficient of membrane treated with silica sol-gel process increased while total surface area was decreasing. Therefore, permeability of ceramic support and membrane treated with silica sol-gel process increased, and selectivity decreased with increasing the gas flow rate. Also, surface area, porosity, pore size, permeability, selectivity, Knudsen and surface diffusion coefficients of membranes treated with silica-sol dip coating and silica-sol processing methods were determined. As a result of this, porosity, pore size, Knudsen and surface diffusion coefficients decreased, total surface area increased in both methods. However, viscous flow and Knudsen flow permeability were detected as a consequence of gas permeability test and Knudsen flow was found to be a dominant transport mechanism in addition to surface diffusive flow owing to the small pore diameter in both methods. It was observed that silica-sol processing method had lower pore diameter and higher surface diffusion coefficient than silica-sol dip coating method.     

Dynamically Resettable Electrode-Electrolyte Interface through Supramolecular Sol-Gel Transition Electrolyte for Flexible Zinc Batteries

Flexible batteries based on gel electrolytes with high safety are promising power solutions for wearable electronics but suffer from vulnerable electrode-electrolyte interfaces especially upon complex deformations, leading to irreversible capacity loss or even battery collapse. Here, a supramolecular sol-gel transition electrolyte (SGTE) that can dynamically accommodate deformations and repair electrode-electrolyte interfaces through its controllable rewetting at low temperatures is designed. Mediated by the micellization of polypropylene oxide blocks in Pluronic and host-guest interactions between α-cyclodextrin (α-CD) and polyethylene oxide blocks, the high ionic conductivity and compatibility with various salts of SGTE afford resettable electrode-electrolyte interfaces and thus constructions of a series of highly durable, flexible aqueous zinc batteries. The design of this novel gel electrolyte provides new insights for the development of flexible batteries.     

PREPARATION OF POLYSULFONAMIDE/TiO2 NANOCOMPOSITES BY SOL-GEL

Polysulfonamide (PSA) was synthesized at room temperature, the polymerization based on terephthaloyl chloride and 3,3 '-diaminodiphenylsulfone in the common solvent N,N -Dimethyl-acetamide (DMAc). Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method. Tetrabutyl titanate(TBT) was added into the polysulfonamide solution, at the same time ,some water was mixed to make the TBT hydrolyze. In the process, hydrochloric acid was used to catalyze the reaction. The polysulfonamide chemistry structure was characterized by FT-IR spectrum. Atomic force microscopy (AFM) was employed to observe the microstructure of the composite film. The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide, TiO2particles were well distributed in the composite film and average size was about 20 nm on average, the heat-resistance of nanocomposite was batter than the pure polysulfonamide.     

聚乙二醇对溶胶-凝胶SiO2增透膜激光损伤行为的影响

 采用溶胶-凝胶工艺制备了聚乙二醇（PEG）改性SiO₂单层增透膜,用输出波长1.06 μm,脉宽3 ns的调Q激光系统产生的强激光进行辐照实验。观察了添加PEG前后的膜层的微结构、表面形貌以及激光损伤行为的变化,讨论了PEG对薄膜激光损伤行为产生影响的机制。结果表明：添加的PEG可以修饰、导向溶胶簇团的生长和交联,并使之有序,由此制备的薄膜结构规整,微缺陷减少,这就提高了膜层的激光损伤阈值;在激光辐照过程中,膜料吸收激光能量,膜层温度升高,膜层的PEG分子受热逐步分解挥发,膜层产生损伤。