The role of As2O3 on the stability and some physical properties of PbO-Sb2O3 glasses

PbO-Sb₂O₃ glasses added with different concentrations of As₂O₃ (10-55 mol%) were prepared to understand their IR spectra, elastic properties (Young's modulus E, Shear modulus G, microhardness H), optical absorption and dielectric properties (constant ε, loss tan δ, ac conductivity σ_ac over a moderately wide range of frequency and temperature and breakdown strength in air medium at room temperature). Results have indicated that the structure of the PbO-Sb₂O₃-As₂O₃ glass is more rigid when the concentration of As₂O₃ is around 40 mol%.     

Effects of vitrification suppression on structure morphology, conductivity and dielectric properties of vanadium phosphate glasses

Vitrification suppression in the (V₂O₅)_1−x (P₂O₅)_x glasses where x=0.10, 0.15, 0.20, and 0.25 was controlled by changing the rate of quenching glasses. The structure variations occurring in the glasses were detected by differential thermal analysis and optical microscope. The results implied the separation and growth of V₂O₅ orthorhombic microcrystal in the samples with x=0.10 and 0.15 whereas other samples did not illustrate remarkable changes in their microstructure. However, in temperature range between 300 and 473 K a semiconducting behavior for all samples appears during the study of electrical conductivity-temperature dependence. A decrease in conductivity values accompanied with some variations in activation energies by reducing quenching rate was observed. The conductivity results suggested that the conduction occurs by the phonon assisted hopping of a small polaron between V⁴⁺ and V⁵⁺ states at relatively higher temperature range above θ_D/2. Whereas at relatively low temperatures the conduction may occur by electron jumping between filled and empty states at Fermi level in the disordered matrix besides polaronic conduction. Reasonable values for the density of localized states, carrier concentration and carrier mobility were estimated and discussed. Also, dielectric constant and dielectric loss were studied as a function of frequency at different temperatures confirming the structure variations in the glass system.     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

单态铝酸根离子与单态硅酸根离子反应的研究

研究了碱性条件下单态铝酸根离与单态硅酸根离子的反应。实验结果表明，生成的硅铝酸盐沉淀与溶液中的Ａｌ，Ｓｉ以及ＯＨ＾－浓义有关。反应过程中存在过饱和现象，反应体系的ＯＨ＾－浓度反应物Ｓｉ／Ａｌ比影响过饱和时间和过饱和区。     

聚酰亚胺/二氧化硅纳米尺度复合材料的研究

通过正硅酸乙酯（ＴＥＯＳ）在聚酰胺酸（ＰＡＡ）的Ｎ，Ｎ’ 二甲基乙酰胺（ＤＭＡｃ），溶液中进行溶胶 凝胶反应，制备出不同二氧化硅含量的聚酰亚胺／二氧化硅（ＰＩ／ＳｉＯ２）复合薄膜材料．二氧化硅含量低于１０ｗｔ％的样品是透明浅黄色薄膜；二氧化硅含量高于１０ｗｔ％的样品是不透明棕黄色薄膜．利用红外光谱、扫描电镜、热失重分析、动态力学分析、热膨胀系数测试和应力 应变测试等方法研究了此类材料的结构与性能．结果表明，ＰＩ／ＳｉＯ２纳米复合材料具有较聚酰亚胺更高的热稳定性和更高的模量；线膨胀系数显著降低；拉伸强度和断裂伸长随二氧化硅含量而变化，分别在１０ｗｔ％和３０ｗｔ％附近出现最大值     

Rb7[SiO4][VO4]: ein Ortho‐Silicat‐Vanadat(V)

Rb₇[SiO₄][VO₄]: an Ortho‐Silicate‐Vanadate(V) Rb₇[SiO₄][VO₄] has been obtained from a redox reaction between CdO and vanadium metal in the presence of Rb₂O and SiO₂ at 600 °C in an Ag container as yellow‐greenish transparent single crystals. The crystal structure determination (IPDS data: P2₁/c, a = 637.6(1) pm, b = 1039.7(1) pm, c = 2076.8(4) pm, β = 93.21(2)°, Z = 4, wR2 = 0.1319) reveals the presence of isolated complex anions, [SiO₄]^4— and [VO₄]^3—.     

Laser-induced breakdown spectroscopy analysis of minerals: Carbonates and silicates

Laser-induced breakdown spectroscopy (LIBS) provides an alternative chemical analytical technique that obviates the issues of sample preparation and sample destruction common to most laboratory-based analytical methods. This contribution explores the capability of LIBS analysis to identify carbonate and silicate minerals rapidly and accurately. Fifty-two mineral samples (18 carbonates, 9 pyroxenes and pyroxenoids, 6 amphiboles, 8 phyllosilicates, and 11 feldspars) were analyzed by LIBS. Two composite broadband spectra (averages of 10 shots each) were calculated for each sample to produce two databases each containing the composite LIBS spectra for the same 52 mineral samples. By using correlation coefficients resulting from the regression of the intensities of pairs of LIBS spectra, all 52 minerals were correctly identified in the database. If the LIBS spectra of each sample were compared to a database containing the other 51 minerals, 65% were identified as a mineral of similar composition from the same mineral family. The remaining minerals were misidentified for two reasons: 1) the mineral had high concentrations of an element not present in the database; and 2) the mineral was identified as a mineral with similar elemental composition from a different family. For instance, the Ca–Mg carbonate dolomite was misidentified as the Ca–Mg silicate diopside. This pilot study suggests that LIBS has promise in mineral identification and in situ analysis of minerals that record geological processes.