Superspace groups and superstructures: NbS3

The application of superspace groups to short-period superstructures is considered. For niobium tri-sulfide this is worked out in detail. It is shown that in that case the superspace group provides more symmetry then given by the space group of the supercell. Its consequences for the structure, the diffraction pattern and tensor-properties are discussed.     

Condensation and freezing of droplets on superhydrophobic surfaces

Superhydrophobic coatings are reported as promising candidates for anti-icing applications. Various studies have shown that as well as having ultra water repellency the surfaces have reduced ice adhesion and can delay water freezing. However, the structure or texture (roughness) of the superhydrophobic surface is subject to degradation during the thermocycling or wetting process. This degradation can impair the superhydrophobicity and the icephobicity of those coatings. In this review, a brief overview of the process of droplet freezing on superhydrophobic coatings is presented with respect to their potential in anti-icing applications. To support this discussion, new data is presented about the condensation of water onto physically decorated substrates, and the associated freezing process which impacts on the freezing of macroscopic droplets on the surface.     

自成核对聚对苯二甲酸1,3-丙二酯结晶行为的影响

The effects of self-seeding nucleation on the crystallization behavior and properties of poly( trimethylene terephthalale) were studied. Differential scanning calorimetry (DSC) results indicated that the crystallization temperature of paly(trimethylene terephthalate) increased obviously(increased about 20℃) after the process of selfseeding nucleation. The results of polarized light microscopy (PLM) showed that the spherulite size decreased markedly from 40μm to 8μm.     

Using Fabry-Perot laser diode and reflective semiconductor optical amplifier for long reach WDM-PON system

In this investigation, we propose and investigate the simple self-injection locked Fabry-Perot laser diodes (FP-LDs) in optical line terminal (OLT); and wavelength-tunable optical network unit (ONU) using reflective optical semiconductor amplifier (RSOA) and FP-LD laser for downstream and upstream traffic in long reach (LR) wavelength division multiplexed-passive optical network (WDM-PON) respectively. The output performance of the proposed two laser sources in terms of power and side-mode suppression ratio (SMSR) has been discussed. Here, for the downstream traffic, the proposed optical transmitter can be directly modulated at 2.5 Gb/s on-off keying (OOK) format with nearly 0.4 dB power penalty at bit error rate (BER) of 10⁻⁹ through 75 km single-mode fiber (SMF) transmission. Moreover, the proposed upstream transmitter can be directly modulated at 1.25 and 2.5 Gb/s with nearly 0.5 and 1.1 dB power penalty, respectively, at the BER of 10⁻⁹.     

片晶折叠表面成核机制与结晶温度的相关性研究

利用自晶种方法,在邻二氯苯稀溶液中培养聚丁二酸丁二醇酯(PBS)晶体,系统研究了结晶温度对其晶体形貌的影响.使用PBS单晶作为研究对象,有效避免小尺寸观察不具有统计意义的缺点.在结晶过程中,通过改变结晶温度和自晶种温度,可有效调控稀溶液中生长的PBS晶体尺寸大小和晶体中缺陷的数量,得到了单层无缺陷的单晶、双层晶体和多层晶体等一系列PBS片晶.基于对不同实验条件下得到片晶的形貌和表面粗糙度的统计结果,提出晶体中可容忍的缺陷数量与结晶温度和晶种温度密切相关这一结论,通过建立热力学模型,定性分析了晶体中缺陷数量和结晶温度的依赖关系,从片晶表面粗糙度统计结果出发,提出高分子片晶折叠表面成核机制,较好地解释了实验中观察到的不同PBS晶体的形貌.     

聚对苯二甲酸1,3-丙二酯的自晶种成核等温结晶动力学

研究了自晶种成核对聚对苯二甲酸1,3-丙二酯(PTT)结晶行为的影响.示差扫描量热结果表明,经过自晶种成核处理后,PTT的结晶温度明显增加.应用Avrami方程分析了PTT等温结晶动力学,Avrami指数n的平均值为3.34,表明初级结晶为三维球晶生长.自晶种成核导致结晶活化能和链折叠功减小,促进PTT的结晶.     

自成核对间同立构1,2-聚丁二烯结晶行为的影响

间同立构 1 ,2 -聚丁二烯自 1 95 5年问世以来 ,引起人们的广泛关注 ,但其形态结构方面的研究却很少报道 [1] .原因是间同立构 1 ,2 -聚丁二烯分子侧链含有大量双键 ,在较高温度下 ( >1 5 0℃ )很容易产生热交联 ,严重影响该聚合物的结晶行为 .我们曾报道了结晶性间同立构 1 ,2 -聚丁二烯的合成和溶液浇铸膜的板条状结构以及单晶结构 [2 ,3] .本文研究了间同立构 1 ,2 -聚丁二烯的自成核过程、结晶行为和形态结构 .自成核 ( Self- seeding nu-cleation)是指聚合物自身的微小晶粒作为晶核而诱导结晶生长的一种成核方式 ,它具有很高的成核效…     

聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.