A fast method to measure the thickness of removed layer from etching of SSNTD based on EDXRF

Solid state nuclear track detectors are commonly used for measurements of concentrations of radon gas and/or radon progeny. All these measurements depend critically on the thickness of the removed layer during etching. However, the thickness of removed layer calculated using the etching period does not necessarily provide a sufficiently accurate measure of the thickness. For example, the bulk etch rate depends on the strength of stirring during etching for the LR 115 detector. We propose here to measure the thickness of the removed layer by using energy-dispersive X-ray fluorescence spectrometry. In the present work, a reference silver nitrate pellet is placed beneath the LR 115 detector, and the fluorescence X-ray intensity for silver is then measured. We have found a linear relationship between the X-ray intensity and the thickness of the removed layer for LR 115 detector. This provides a fast method to measure the thickness of removed layer from etching of LR 115 detector. However, this method was found to be inapplicable for the CR-39 detector. Therefore, alternative methods have yet to be explored for the CR-39 detector.     

Volcanic monitoring for radon and chemical species in the soil and in spring water samples

Soil radon has been monitored at two fixed stations in the northern flank of Popocatepetl Volcano, a high risk volcano located 60 km SE from Mexico City. Water samples from three springs were also studied for radon as well as major and trace elements. Radon in the soil was recorded using track detectors. Radon in the water samples was evaluated using the liquid scintillation method and an Alphaguard. The major elements were determined through conventional chemical methods and trace elements using an ICP-MS equipment. Soil radon levels were low, indicating a moderate diffuse degassing through the flanks of the volcano. Groundwater radon had almost no relation with the eruptive stages. Water chemistry was stable in the reported time (2000–2002).     

Angular response characteristic of pyramid shape fast neutron dosimeter using CR-39 films

CR-39 is a highly sensitive etched track detector for neutron monitoring and dosimetry applications but its dose equivalent response is strongly direction dependent with respect to the incident neutrons. This is considered to be a major drawback for their use. In the present study, an attempt has been made to develop a pyramid shaped dosimeter, which consists of polyethylene material of thickness 1 mm with the provision to hold three CR-39 films at an angle of 35° to each other. The response of CR-39 in this configuration under optimum electrochemical etching at elevated temperature have been found nearly angular independent and therefore the dosimeter can be used for neutron monitoring, i.e. personnel as well as area monitoring.     

Use of chemical etching of CR-39 foils at elevated temperature for fast neutron personnel monitoring in India

CR-39 Solid State Nuclear Track Detecting foils (SSNTD), along with 1 mm thick polyethylene radiator, sealed in triple laminated pouches, are used for country wide Fast Neutron Personnel Monitoring in India. With the present system of processing by elevated temperature electrochemical etching (ETECE) and evaluation using automatic image analysis, only 16 foils are processed at a time and it is useful over the dose equivalent range 0.2 mSv to 10 mSv. It has been reported that, by processing CR-39 of good detection efficiency by chemical etching at elevated temperature, more numbers of foils can be processed simultaneously. In the present study, CR-39 foils from Pershore Moulding (UK) have been chemically etched using 7 N KOH under various conditions of temperature and etching durations and evaluated using high magnification microscope. The duration of chemical etching, has been optimized at a constant temperature of 60°C for chemical etching process. The characteristics of the chemically etched CR-39 foils are compared with the characteristics of the CR-39 foils processed by the existing system of ETECE and the detailed results are presented in the full text of the paper. It has been observed that by chemical etching process, the dose equivalent range of CR-39 foils can be extended above 60 mSv.      

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

The effect of etching solution composition on the response of an electrochemically etched CR-39 detector

Etching solutions of different compositions were applied at room temperature (22°C) for electrochemical etching. The background developed during electrochemical etching in a CR-39 track detector was investigated. Detectors irradiated with alphas of 5.49 MeV were measured also. It was found that the PEW solutions (potassiumhydroxid, ethylalcohol, water) showed good sensitivity. One of them (PEW_20/40 was applied for neutrons from a ²⁵²Cf source. The achieved registration sensitivity was about 10⁻⁵ spot/n after 3 hours of etching time.     

Application of SSNTDs for study of boron distribution in alloys

A study of boron behavior and its distribution in boron doped iron-, nickel- and aluminum-base alloys subjected to various treatment conditions has been performed. For this purpose a technique based on the detection of ¹⁰B(n,)⁷Li reaction products with track etch detectors has been applied. High boron enrichment of grain boundaries of both iron base and ingot nickel base alloys has been observed. After hot and then cold rolling of the latter specimens boron rearrangement along with the proper deformation of the structure took place. Striation of boron in a hot rolled aluminum alloy along the rolling direction has been observed.     

Application of SSNTDs to investigations of radiation accident after-effects

Track methods and devices used for studies conducted after radiation accidents are considered. Solid State Nuclear Track Detectors (SSNTDs) are applied for measurements of contamination in soil, water, biological and other objects of alpha-emitting radionuclides, as well as for estimation of neutron doses by means accident dosimeters. Known radiation accidents (Chernobyl a.o.) and potential emergencies (sunken submarine “Komsomolets”, nuclear reactors) are discussed. Some result of SSNTD application at after-accident period are presented.     

Indoor radon measurement in Izmir Province,Turkey

In 2013, an extensive study was performed in a total of 117 locations in Izmir province and indoor radon levels were measured using the alpha track etch integrated method with LR-115 detectors. As the maps are more practical to interpret the results of radiological survey, the distributions of indoor ²²²Rn activities in four most densely populated districts of Izmir were mapped in detail. It is seen that the estimated average radon concentration level (210 Bq m^?3) determined in Izmir province was almost three times higher than the mean value for Turkey (81 Bq m^?3). Exposed annual effective dose equivalents for Izmir province were estimated in the range of 0.7 to 12.3 mSv year^?1 with a mean of 5.3 mSv year^?1. In this study, it is pointed out that indoor radon concentration was affected by the age of the building and height above the ground.     

Soil radon time series: Surveys in seismic and volcanic areas

Soil radon surveys have been performed in a long term monitoring basis with SSNTD (LR 115 type II), in order to observe possible fluctuations due to high magnitude seismic events and volcanic eruptions. Five-year radon time series are available in stations located in an intense seismic zone located along the Pacific coast of Mexico. The series analyses have been performed as a function of the local seismicity and geological characteristics. A discussion is intended to explain the lack of biunivocal relation between single radon peaks and earthquakes for the long term monitoring data using SSNTDs. Examples of short term radon anomalies obtained with continuous probes are also discussed as a function of local earthquakes and meteorological perturbations. Additionally, complementary results from recent changes in the activity pattern of an active volcano indicate that degassing process induced anomalous soil radon emanation correlated with the volcanic activity changes.