A comparison of magnetic resonance imaging methods for fluid content imaging in porous media

Quantitative measurements are important for imaging fluid content in porous media. Conventional MRI methods suffer from contrast because of relaxation times in porous media, resulting in measurements of apparent fluid content, not the true fluid content. We compare four magnetic resonance imaging methods for fluid content imaging in several water‐saturated reservoir core plugs: frequency‐encoded spin echo, single point ramped imaging with T₁ enhancement, hybrid spin echo single point imaging (SE‐SPI), and T₂ mapping SE‐SPI. 1‐D profiles obtained with each method were compared in terms of image quality, image sensitivity, and quantification of water content. The image quality of short T₂ lifetime samples suffered from blurring in hybrid SE‐SPI images. Image sensitivity was the highest in the profiles obtained with frequency‐encoded spin echo. The quantification of frequency‐encoded spin echo, T₂ mapping SE‐SPI, and hybrid SE‐SPI suffered in core plugs with a significant population of short T₂ components because of T₂ attenuation. Overall, single point ramped imaging with T₁ enhancement was found to be the most general method for fluid content imaging. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnetic Resonance Imaging of Gases: A Single-Point Ramped Imaging with T1 Enhancement (SPRITE) Study

A pure phase-encoding MRI technique, single-point ramped imaging withT₁enhancement, SPRITE, is introduced for the purpose of gas phase imaging. The technique utilizes broadband RF pulses and stepped phase encode gradients to produce images, substantially free of artifacts, which are sensitive to the gasT₁andT^*:₂relaxation times. Images may be acquired from gas phase species with transverse relaxation times substantially less than 1 ms. Methane gas images,¹H, were acquired in a phantom study. Sulfur hexafluoride,¹⁹F, images were acquired from a gas-filled porous coral sample. High porosity regions of the coral are observed in both the MRI image and an X-ray image. Sensitivity and resolution effects due to signal modulation during the time-efficient acquisition are discussed. A method to increase the image sensitivity is discussed, and the predicted improvement is shown through 1D images of the methane gas phantom.     

Repetition time and flip angle variation in SPRITE imaging for acquisition time and SAR reduction

Single point imaging methods such as SPRITE are often the technique of choice for imaging fast-relaxing nuclei in solids. Single point imaging sequences based on SPRITE in their conventional form are ill-suited for in vivo applications since the acquisition time is long and the SAR is high. A new sequence design is presented employing variable repetition times and variable flip angles in order to improve the characteristics of SPRITE for in vivo applications. The achievable acquisition time savings as well as SAR reductions and/or SNR increases afforded by this approach were investigated using a resolution phantom as well as PSF simulations. Imaging results in phantoms indicate that acquisition times may be reduced by up to 70% and the SAR may be reduced by 40% without an appreciable loss of image quality.     

Ⅱ类热成像光机扫描技术的发展

根据武器系统的要求，缩小了军用热像仪扫描器的尺寸并减轻了其重量，指出改善空间分辨率是提高Ⅱ类热像仪性能的主要技术手段。认为采用限制孔径望远镜和变形光学系统是改善空间分辨率的简便而又经济的途径。     

Centric-scan SPRITE magnetic resonance imaging with prepared magnetisation

The combination of contrast preparation with centric-scan SPRITE imaging readout is investigated. The main benefit of SPRITE, its ability to image objects with short T2, is retained. We demonstrate T1 and T2 mapping as examples of magnetisation preparation followed by magnetisation storage and spatially resolved encoding. A strategy for selection of the most advantageous imaging parameters for contrast mapping is presented.     

Quantitative discrimination of water and hydrocarbons in porous media by magnetization prepared centric-scan SPRITE

MRI has considerable potential as a non-destructive probe of porous media, offering the possibility of rapid quantification of local oil and water content. This potential has not yet, however, been completely realized. In this paper, we explore a general magnetization preparation approach to the discrimination of water and oil in a model, representative, porous medium. These measurements have, as a common element, a centric scan pure phase encode readout based on the SPRITE methodology. Magnetization preparation permits facile T1, T2 and diffusion coefficient mapping as the basis for oil and water discrimination. Diffusion coefficient mapping proved to be the most robust approach to discrimination of oil and water. These methods are illustrated through static experiments and a dynamic immiscible fluid displacement experiment.     

Sectoral sampling in centric-scan SPRITE magnetic resonance imaging

A new approach to the construction of k-space trajectories for centric-scan SPRITE in both 2D and 3D is presented. All benefits of previous SPRITE methods are retained, most importantly the ability to image objects with short T*(2). This new approach gives more flexibility in the choice of number of interleaves with points more evenly distributed across k-space. All these improvements positively contribute to image quality and resolution, which can be also traded off against experimental speed. Sectoral sampling will have significant benefits for magnetisation preparation contrast imaging.     

SPRITE MRI of bubbly flow in a horizontal pipe

Bubble flow is characterised by numerous phase interfaces and turbulence, leading to fast magnetic resonance signal decay and artefacts in spin-warp imaging. In this paper, the SPRITE MRI pulse sequence, with its potential for very short encoding times, is demonstrated as an ideal technique for studying such dynamic systems. It has been used to acquire liquid velocity and relative intensity maps of two-phase gas–liquid dispersed bubble flow in a horizontal pipe at a liquid Reynolds number of 14,500. The fluids were air and water and a turbulence grid was used to generate a dispersed bubble flow pattern. The SPRITE technique shows promise for future research in gas–liquid flow.     

Phantom materials for single point imaging pulse sequences

The popularity of pure phase encode MRI techniques, including single point imaging (SPI), is steadily increasing, particularly in instances where the samples of interest are solid-like, or for other reasons possess short effective transverse relaxation times, T2*. As the interest in these techniques grows, so too does the need for a phantom material which is representative of this class of samples. The characteristics of such a phantom should include chemical and physical stability, straightforward preparation, high signal to noise ratio and relaxation times which are both easily manipulated and representative. To this end, we have developed a gelatin/sucrose-based gel which addresses the above criteria and behaves as a very flexible short T2* phantom. An order of magnitude variation in T1 and T2 can be achieved over a reasonable range of sucrose concentration. Even larger changes can be achieved with the addition of further doping agents.