Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

The effect of ionising radiation on poly(methyl methacrylate) used in intraocular lenses

Gamma radiation is increasingly being used to sterilise intraocular lenses (IOLs) made from poly(methyl methacrylate) (PMMA). In this study, samples of PMMA used in the fabrication of IOLs were exposed to irradiation doses typically used for their sterilisation. The effect of this treatment on the polymer was analysed by size-exclusion chromatography (SEC), UV-visible and infrared spectroscopy and scanning electron microscopy (SEM). The PMMA was found to have undergone chain scission, decarboxylation and colour change following the irradiation.     

Two‐dimensional chromatography as a tool for studying band broadening in size‐exclusion chromatography

Comprehensive 2‐D size‐exclusion chromatography (SEC×SEC) has been realized. SEC×SEC is not a useful technique for characterizing complex polymers. However, it is potentially an elegant tool to study band‐broadening phenomena. If narrow fractions can be collected from the first dimension, the band broadening in the second dimension is only due to chromatographic dispersion. This would allow a clear distinction to be made between chromatographic band broadening (column and extra‐column) and SEC selectivity (band broadening due to sample polydispersity). In comparison with MALDI‐MS, SEC×SEC allows the study of polymers across a much broader molar‐mass range.     

Piezoelectric Fiber－optic Spectroelectrochemistry──A New Technique of Spectroelectrochemistry in Combination With Piezoelectric Quartz Crystal Detection

ＰｉｅｚｏｅｌｅｃｔｒｉｃＦｉｂｅｒ－ｏｐｔｉｃＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙ──ＡＮｅｗＴｅｃｈｎｉｑｕｅｏｆＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙｉｎＣｏｍｂｉｎａｔｉｏｎＷｉｔｈＰｉｅｚｏｅｌｅｃｔｒｉｃＱｕａｒｔｚＣｒ...     

Entrapment and release of sodium polystyrene sulfonate (SPS) from calcium alginate gel beads

The release of sodium polystyrene sulfonate (SPS) from calcium alginate hydrogel beads has been studied. It has been shown that the structure of the cross-linked calcium alginate network is of primary importance in the retention and/or release of the SPS. This has been evidenced by studying the influence of Ca²⁺ concentration, molar masses (M_n) and the ratio of mannuronic acid/guluronic acid components. A minimum in the SPS release is observed in relation with the organization of the network structure. Conditions inducing the organization of a strong gel (e.g. high Ca²⁺ concentration for example) are not always related to a low release. A good control of release is found when a compromise between a well-structured hydrogel and sterical consideration of SPS is reached.     

多检测GPC/SEC技术在高分子表征中的应用Ⅳ.氘化高分子的溶液性质

采用体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测联用技术表征了氘化聚苯乙烯、聚苯乙烯和氘化聚苯乙烯－ 聚异戊二烯。结果表明,在θ条件下,虽然氘化聚苯乙烯的化学依赖性常数υＴ,ＤＰＳ比聚苯乙烯的化学依赖性常数υＴ,ＰＳ大,但２５ ℃时在四氢呋喃中,氘化聚苯乙烯的分子尺寸仍小于聚苯乙烯的分子尺寸。由于嵌段共聚物的淋洗体积随组成变化,所以用传统的ＳＥＣ／ＲＩ得不到准确的分子量。经比较膜渗透、小角激光光散射和基质辅助激光脱吸与离子化时间飞行质谱等的实验结果,证明体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测技术能准确地得到氘化二嵌段共聚物的分子量以及其它重要信息。     

Effects of process severity on the chemical structure of Miscanthus ethanol organosolv lignin

Ethanol organosolv lignin extracted from Miscanthus × giganteus with differing levels of severity (1.75 < CS<2.8) were subjected to comprehensive structural characterization by ¹³C, ³¹P NMR, FTIR spectroscopy and gel permeation chromatography. The results were compared to those from milled wood lignin from the same feedstock. The results showed that an increase in the severity of the treatment enhanced the dehydration reactions on the side chain and the condensation of lignin, increased the concentration of phenol groups and decreased the molecular mass of lignin fragments. It appeared that for the experimental conditions generally employed the cleavage of α-aryl ether bonds is primarily reaction responsible for lignin depolymerization under the organosolv conditions examined.     

Acceleration of silanol condensation of a methacryl-functional silane in the model sizing system

The silanol condensation of hydrolyzed γ-methacryloxypropyltrimethoxysilane (γ-MPS) in the presence of a typical film-forming polymer, poly(vinyl acetate), PVAc, has been studied. The model sizing system, consisting of the hydrolyzates of γ-MPS and PVAc obtained from the alcoholic aqueous solution, is studied using Fourier transform infrared spectroscopy (FT-IR) and size exclusion chromatography (SEC). In the initial stage of silanol condensation of the hydrolyzates of the model sizing system, it has been found that the condensation reaction is accelerated compared with the system that contains no film-former. It has also been found that the structure of γ-MPS oligomer is relatively ordered and less-active for further silanol condensation. The least-square curve-fitting procedure for FT-IR spectra indicates five carbonyl stretching bands, reflecting the hydrogen bonded and the free carbonyl groups of the silane coupling agent and the film-forming polymer.     

Multiarm star block copolymers via Diels‐Alder click reaction

Two types of multiarm star block copolymers: (polystyrene)_m‐poly(divinylbenzene)‐poly(methyl methacrylate)_n, (PS)_m‐polyDVB‐(PMMA)_n and (polystyrene)_m‐poly(divinylbenzene)‐poly(tert‐butyl acrylate)_k, (PS)_m‐polyDVB‐(PtBA)_k were successfully prepared via a combination of cross‐linking and Diels–Alder click reactions based on “arm‐first” methodology. For this purpose, multiarm star polymer with anthracene functionality as reactive periphery groups was prepared by a cross‐linking reaction of divinyl benzene using α‐anthracene end functionalized polystyrene (PS‐Anth) as a macroinitiator. Thus, obtained multiarm star polymer was then reacted with furan protected maleimide‐end functionalized polymers: PMMA‐MI or PtBA‐MI at reflux temperature of toluene for 48 h resulting in the corresponding multiarm star block copolymers via Diels–Alder click reaction. The multiarm star and multiarm star block copolymers were characterized by using ¹H NMR, SEC, Viscotek triple detection SEC (TD‐SEC) and UV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 178–187, 2009