Study of the effect of swift heavy Ni ion irradiation on ruby single crystal by using the XANES and EXAFS techniques

We have made the XAFS measurements at the Cr–K-edge on natural Indian ruby single crystals (corundum) and its two irradiated samples with fluence 1×10¹² Ni⁶⁺ and 5×10¹² Ni⁶⁺ ions/cm². Irradiated samples show interesting changes in their physical appearance. XANES measurements show progressive decrease in Δ_oct value on increase of Ni fluence in irradiated samples. EXAFS measurements on these samples show decrease in Cr–O distance on increase of Ni fluence. Lowering of Δ_oct value is correlated with the increase of Cr–O distance.     

Photoluminescence and atomic force microscopy studies on pre- and post-irradiated ruby with Fe3+ ion

Photoluminescence spectra measured for pristine ruby and its two irradiated samples with Fe³⁺ ion show R₁, R₂, N lines and a broad band. Decrease in intensities of these features is observed with irradiation of Fe³⁺ ion in ruby. Progressive structural changes and modifications on surface of irradiated rubies with Fe³⁺ ion have been observed by atomic force microscopy. Decrease in intensities is discussed in terms of pair formation.     

Side-hole to anti-hole conversion in time-resolved spectral hole burning of ruby: Long-lived spectral holes due to ground state level population storage

We report time-resolved transient spectral hole burning of Verneuil-grown 20 ppm and ca. 0.6 ppm ruby (Al₂O₃:Cr³⁺) in zero field and low magnetic fields B∥c at 4 K. The hole-burning spectroscopy of the 20 ppm sample implies relatively rapid cross relaxation in the ⁴A₂ ground state on the ∼1 ms timescale both in zero field and in low magnetic fields, B∥c, up to 0.2 T. In the 0.6 ppm sample, side-hole to anti-hole conversion is observed both in zero field and in low magnetic fields. This conversion is caused by population storage in ⁴A₂ ground state levels. Spin-lattice relaxation, on the 200 ms timescale, is directly observed from the time dependence of the resonant hole and anti holes in B∥c, consistent with a very low cross-relaxation rate. However, in zero field cross relaxation in the ⁴A₂ ground state is still a significant relaxation mechanism for the 0.6 ppm sample resulting in hole decay in ∼50 ms.     

A Different Laboratory Tale: Fifty Years of Mössbauer Spectroscopy

I explore the fifty-year development of M?ssbauer spectroscopy by focusing on three episodes in its development at Argonne National Laboratory: work by nuclear physicists using radioactive sources in the early 1960s, work by solid-state physicists using radioactive resources from the mid- 1960s through the 1970s,and work by solid-state physicists using the Advanced Photon Source from the 1980s to 2005. These episodes show how knowledge about the properties of matter was produced in a national-laboratory context and highlights the web of connections that allow nationallaboratory scientists working at a variety of scales to produce both technological and scientific innovations.     

Cuby: An integrative framework for computational chemistry

Cuby is a computational chemistry framework written in the Ruby programming language. It provides unified access to a wide range of computational methods by interfacing external software and it implements various protocols that operate on their results. Using structured input files, elementary calculations can be combined into complex workflows. For users, Cuby provides a unified and userfriendly way to automate their work, seamlessly integrating calculations carried out in different computational chemistry programs. For example, the QM/MM module allows combining methods across the interfaced programs and the builtin molecular dynamics engine makes it possible to run a simulation on the resulting potential. For programmers, it provides high‐level, object‐oriented environment that allows rapid development and testing of new methods and computational protocols. The Cuby framework is available for download at http://cuby4.molecular.cz . © 2016 Wiley Periodicals, Inc.     

Spatially resolved piezo-spectroscopic characterizations for the validation of theoretical models of notch-root stress fields in ceramic materials

The main aim of this work is a precise experimental assessment of the local stress fields developed at the notch-root in a ruby crystal, selected as a paradigm brittle material, by means of photo- and electron-stimulated luminescence techniques. Our approach takes advantage of the piezo-spectroscopic (PS) effect, which consists of a spectral shift of the luminescence emitted by the material due to lattice strain. Highly spatially resolved stress maps were extensively collected at the notch-root and spectral shifts monitored for the chromophoric (R-lines) fluorescence observed in a single-crystalline ruby sample. Experimental data were analyzed and compared to the theoretical solutions of notch-root stress fields given by Filippi and by Creager-Paris. Due to its inherent simplifications, the Creager–Paris solution was found leading to underestimation of the maximum stress value piled up in the material, while the Filippi’s solution represented a more suitable approximation for the stress field developed at the notch-root.     

Numerical calculations of intracavity dye Q-switched ruby laser

A mathematical model describing the dynamic emission of the Q-switched ruby laser has been adapted. The suggested model allows the investigation of the effects of a dye cell on the mode characteristics of the ruby laser and, moreover, the study of the effect of the laser input parameters on the output laser pulse. This model simulates the nonlinear effects of dye pulse modulation on the laser emission.In addition, a numerical solution of a nonlinear rate equation system of the adapted model is discussed. The solution estimates the density of the emitted radiation, population inversion and energy transfer processes of the ruby laser rod and dye cell for different emission regimes (one pulse regime, free running pulses, repetition periodic pulses). The estimated results of the laser output pulse characteristics are in a good agreement with the other calculated and experimental results.     

Dose rate measurements with a ruby-based fiber optic radioluminescent probe

Fiber optic radioluminescence dosimetry allows real-time dose rate measurements in complex, narrow geometries and at places of high dose rates, without exposing the operator or the susceptible electronics. The keys are the spatial separation of radiation sensitive probe and electronic processing system and their optical connection by a flexible light guide. The small probes are capable of measuring fields of high dose rate gradients and the sealed probe-tip qualifies for applications in the fluid milieu and even for in-vivo-dosimetry. One problem of fiber optic dosimetry is the generation of Cherenkov radiation and fiber luminescence in the irradiated light guide, the so called stem effect. Ruby (Al₂O₃:Cr) has a narrow radioluminescent emission at 694 nm and is a potential luminophor for fiber optic radioluminescence dosimetry. In this work the influence of the stem effect on our ruby-based fiber optic dosimetry system is examined. The behavior of ruby probes under irradiation up to 0.5 kGy, as well as their luminescence decay characteristics and the applicability for measurements in radiotherapeutic fields are investigated.     

Structural and electronic evolution of Cr2O3 on compression to 55 GPa

Synchrotron single-crystal x-ray diffraction experiments have been performed on corundum-type Cr₂O₃ up to a pressure of 55 GPa in Ne and He pressure transmitting media. Diffraction experiments were complemented by measurements of optical absorption spectra with single crystal samples up to 60 GPa. Results of the diffraction data analysis rule out the earlier reported monoclinic distortion at 15–30 GPa, but indicate evidence of two discontinuous transitions of electronic or magnetic nature, most likely associated with a change in magnetic ordering and charge transfer. The compression mechanism established from single crystal refinements indicates much smaller distortion of the Cr³⁺ coordination environment than was previously assumed.     

Raman Scattering From Water Vapor

Raman scattering from water vapor has been observed using a thermally-tuned TEM₀₀ ruby laser as excitation for a range of incident wavelengths from 6943.1 Å to 6944 Å covering the strong water absorption line centered at 6943.8 Å with a linewidth of 0.04 Å. Raman scattering cross-section relative to nitrogen has been determined (for the first time to our knowledge) to be 0.39±0.12. No significant enhancement of Raman signal was observed even though the incident ruby was tuned to the absorption line. Possible reasons for the lack of resonance Raman effect are given.