Polarized Lidar Reflectance Measurements of Vegetation at Near-Infrared and Green Wavelengths

There is growing interest in the use of lidar for remote sensing of vegetation owing to the emergence of reliable and rugged lasers and highly sensitive detectors. Lidar remote sensing has a distinct advantage over conventional techniques in vegetation remote sensing due to its capability for three-dimensional characterization of vegetative targets. The Multiwavelength Airborne Polarimetric Lidar (MAPL) system was developed primarily for vegetation remote sensing applications from an airborne platform of up to 1,000 -m altitude. The lidar system has full waveform capture and polarimetric measurement capability at two wavelengths in the near-infrared (1064 nm) and the green (532 nm) spectral regions. This study presents preliminary ground-based lidar reflectance measurements on a variety of deciduous and coniferous trees under fully foliated conditions with a view towards tree species discrimination. Variations in the reflectance characteristics of selected deciduous trees under unfoliated and fully foliated conditions were also investigated. Our study reveals distinct differences in the reflectance characteristics of various trees.     

Long-wavelength GaInAsSb/AlGaAsSb DFB lasers emitting near 2.6 μm

We have successfully fabricated and characterized room temperature continuous wave (cw) GaInAsSb/AlGaAsSb distributed feedback lasers emitting in the wavelength region between 2.499 and 2.573 μm. To the best of our knowledge, this is the longest emission wavelength realized with a GaSb-based DFB laser diode. The laser structure used for DFB processing was grown by solid source molecular beam epitaxy. A DFB concept requiring no subsequent overgrowth step was used by defining first-order Cr-Bragg gratings laterally patterned to a ridge waveguide. Threshold currents smaller than 60 mA and room temperature cw output powers up to 6.5 mW were obtained. The laser diodes show single mode emission with side mode suppression ratios (SMSR) of up to 32 dB.     

A linearized vector radiative transfer model for atmospheric trace gas retrieval

We present a plane parallel radiative transfer model for polarized light, that provides the intensity vector as well as the derivatives of the four Stokes parameters with respect to atmospheric trace gas profiles. These derivatives are essential for retrieval of height resolved trace gas information from satellite measurements of backscattered sunlight. The model uses the Gauss-Seidel iteration technique for solving the radiative transfer equation. For the first time, the forward-adjoint radiative perturbation theory is applied for the linearization of a radiative transfer model including polarization. The accuracy of the model is better than 0.025% for all four Stokes parameters and better than 0.03% for the derivatives.     

Analytic evaluation of the weighting functions for remote sensing of blackbody planetary atmospheres: a general linearization approach

An analytic approach is proposed for the evaluation of weighting functions for remote sensing of a blackbody planetary atmosphere based on straightforward, general linearization. In the present paper, this approach is applied to the case of remote sensing with the nadir (down-looking) geometry. Expressions for weighting functions for various atmospheric parameters are derived. It is demonstrated that in a realistic case of temperature-dependent atmospheric absorption, an additional term appears in the expression for the temperature weighting function which contains the temperature derivative of the atmospheric absorption coefficient. The approach is applied to the case of a semi-infinite atmosphere and then, to the atmosphere of a finite optical depth with the underlying surface. In this, latter case, the expressions are also obtained for partial derivatives of observed radiances with respect to surface parameters: surface pressure, temperature and emissivity.     

PVA固定化脲酶电极的制作及电极特性的研究

利用PVA低温下的物理交联固定酶,制成酶电极并在不同尿素浓度、pH值、温度等条件下进一步研究这种酶电极的响应特性.     

基于芘的荧光熄灭的单质碘荧光敏感膜的研究

单质碘熄灭固定于增塑的ＰＶＣ膜中的芘的荧光，且这种熄灭作用可逆。本据此研制了用于测定单质碘浓度的荧光敏感膜，最佳膜组成为２～４ｍｇ芘、５０ｍｇＰＶＣ粉、１００ｍｇ邻苯二甲酸二异辛酯，测定碘的浓度范围为２．２６×１０＾－５～１．０４×１０＾－３ｍｏｌ／Ｌ。此膜测定单质碘的重现性好，响应时间小于４０ｓ。除Ｆｅ＾３＋、Ｂｉ＾３＋外，其它常见离子均无干扰。将此膜用于食盐中碘的测定，结果令人满意。     

Effect of solvent on the cation-sensitive fluorescence of polyanions bearing 4′-acryloylbenzo-18-crown-6 Units

Changes in the fluorescence intensity of polyanions bearing 4-acryloylbenzo-18-crown-6 units on the addition of cations were studied in a mixed solvent of methanol and water at 30°C. The sensitivity of the change in fluorescence intensities of the polymers toward cations was strongly enhanced compared to that of the corresponding model compound. When alkali metal cations were added, the fluorescence intensity of the polymers decreased in the orders Li⁺>Na⁺>Cs⁺>Rb⁺>K⁺ in a methanol-water (19) mixture and Li⁺>Na⁺>Rb⁺>K⁺Cs⁺ in a methanol-water (91) mixture. Alkaline earth metal cations and alkylamine hydrochlorides decreased the fluorescence intensity of the polymers in a methanol-water (19) mixture. The cation-dependent decrease in the fluorescence intensity of the polymers was affected by the water fraction in a mixed solvent of methanol and water.     

Quantitative millimetre wavelength spectrometry at pressures approaching atmospheric: II. Determination of oxygen at atmospheric pressure

A millimetre wavelength (MMW) Fabry-Perot cavity spectrometer described in earlier work has been applied to the measurement of oxygen absorption at 60 GHz and atmospheric pressure in a gas matrix of nitrogen. The spectrometer has also been modified such that the MMW source is stabilised by a sub-harmonic microwave signal transmitted by an infrared carrier on a single mode telecommunications fibre optic. This is a step towards developing an instrument comprising minimal electronic components that can perform MMW spectrometry remotely. Oxygen determinations were achieved by monitoring the change in the quality factor (Q) of a resonant Fabry-Perot cavity due to the presence of an absorbing sample. The MMW absorption of the sample was determined by incrementing the frequency modulation (FM) deviation of the source frequency scanning the cavity resonance profile. The response curve of absorption signal versus fraction of oxygen in nitrogen was found to be linear throughout the working range of 1-100% O₂ (v/v) in N₂ with a slope of (1.407±0.007)×10⁻⁴ m⁻¹ (% O₂)⁻¹. The detection limit (3× standard deviation of the background) was found to be ∼0.8% (v/v). The MMW technique employed is advantageous since, unlike common MMW techniques, there is no vacuum requirement. Application of this method, to the monitoring of oxygen in gas mixtures of practical importance, is proposed. Values of the oxygen spectral absorption coefficients of lines between 55 and 60 GHz were measured at reduced pressure and found to be within ±2% of previous literature values. A pressure correction coefficient for O₂ absorption at 60 GHz in the 45-121 kPa range was obtained and found to be (1.354±0.014)×10⁻⁴ m⁻¹ kPa⁻¹.     

In situ sensing of the middle atmosphere with balloonborne near-infrared laser diodes

Since 1997, two near-infrared laser diode sensors have been developed with the support of the CNES, the French space agency, to provide in situ data of H(2)O, CH(4) and CO(2) in the middle atmosphere. The realized instruments were flown from stratospheric balloons within the framework of European campaigns for the study of stratospheric ozone and water vapor and were involved in the validation of the ODIN and ENVISAT satellites. In this paper, we describe the developed laser probing technique, we report atmospheric measurements and finally we discuss future perspectives, particularly the in situ laser sensing of the lower atmosphere of Mars and the implication of the laser hygrometers in balloon campaigns at mid-latitudes and tropical regions to investigate the sources and sinks of stratospheric H(2)O.     

Ag@Au core/shell triangular nanoplates with dual enzyme-like properties for the colorimetric sensing of glucose

Due to the serious harm of diabetes to human health, development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes. Currently, most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes. Herein, we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates (TNPs), which combines glucose oxidase (GOD)- and horseradish peroxidase (HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs. The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity, enabling the oxidation of glucose to produce H₂O₂, which can further etch the silver core, leading to the decrease of absorbance at 800 nm and the color change from blue to colorless. Compared with the previous nanozymes-based glucose sensors, our method avoids the use of enzymes and organic chromogenic agent. Moreover, the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell. This method was successfully applied to the detection of urine samples from patients with diabetes, indicating its practical applicability for real sample analysis.