线激光辅助的皮带撕裂视觉检测方法

为了快速、准确地检测出输送机皮带工作时发生的纵向撕裂事故,提出了一种基于线激光的视觉检测方法.“一”字线激光器向皮带底面投射直线激光条纹,使用CCD相机获取图像并提取出光条中心,通过分析光条中心畸变特征来判断皮带表面是否存在撕裂.首先采用阈值法对激光条纹进行分割;然后在光条区域上利用重心法实现光条中心的粗略提取;最后利...     

一种考虑剪切变形的平行四边形厚/薄板通用单元

根据Timoshenko二广义位移梁理论，构造了深梁位移场的插值函数。利用斜坐标系与直角坐标系的变换关系、有限条带思想和深梁位移插值函数，构造了一种考虑剪切变形的平行四边形厚／薄板弯曲通用单元的位移(曲率、剪应变、转角、横向位移)插值函数，导出了刚度矩阵和非结点荷载等效力。并对简支阍支方板、Razzaque斜板、四边简支斜交板弯曲进行了数值计算。算例表明此单元有较好的精度，对于薄板不出现剪切闭锁，可适应于目前桥梁建设中大量采用的斜交板桥结构分析。     

Ballistic and numerical simulation of impacting goods on conveyor belt rubber

Impact loading is an important process in the transport industry as it causes wear and failure of critical components. Conveyor belts are of particular importance as they are used in practically every industry where large quantities of goods are moved over short (<10 m) or long distances (>1 km). To investigate stress levels inside the material during impact loading, a gas gun was utilized to shoot 9 mm spherical steel balls onto the surface of a rubber conveyor belt. A high speed video recording system was employed in order to determine penetration depth and dissipated energy of the steel ball. Maximal penetration depths of up to 3.9 mm and maximal dissipated energies of up to 86.8 % were measured. Additionally, a numerical simulation using smooth particle applied mechanics was conducted and compared to the experimental results obtained with the gas gun. The calculated von Mises stresses affected the conveyor belts up to a maximum depth of 8.8 mm with at least 20 MPa. Maximum von Mises stresses were calculated to reach 60 MPa.     

用半波带法讨论单缝夫琅和费衍射的课件演示与制作

根据半波带法的思路，介绍了利用计算机课件演示对单缝夫琅和费衍射的条纹光强与衍射角之间的关系，以便有效地化解教学难点，帮助学生对该知识点形成清晰的认识和深化理解，同时对课件制作要点作了简要说明。     

Dynamics of coupled systems

A survey in the form of a review of the author’s research results in the area of dynamics of coupled rotations and coupled systems is presented. The theorem on the existence of a trigger of the coupled singularities and the separatrix in the form of the number eight is presented with a few examples of coupled rotations of the simple systems with debalances. Also, a survey of models and dynamics of coupled systems composed of a number of deformable bodies (plates, beams or belts) with different properties of materials and discrete layer properties is presented and mathematically described. The constitutive stress–strain relations for materials of the coupled sandwich structure elements are presented for different properties: elastic, viscoelastic and creeping. The characteristic modes of the coupled system vibrations are obtained and analyzed for different kinds of materials and structure composition. The visualization of the characteristic numbers and modes and eigenamplitude forms are presented. Structural analysis of sandwich structure vibrations is done.     

基于半波带分析法的菲涅耳波带片衍射特性的讨论

基于半波带的分析方法简单明了地分析了平行光经菲涅耳波带片衍射后的多焦点特性以及各焦点的光强变化规律．     

Cornerning radial tyres

An angular difference between direction of wheel motion and wheel plane produced a lateral force on a rolling tyre. A simple mechanism of shear stress generation in the contact area of tread is used. The coefficient of friction plays a limiting role. The resulting lateral force and self-aligning torque are computed by means of the belt model of a radial tyre. Finally, some numerical results are given to illustrate the theory.     

运动表面风力机翼型的气动性能研究

本文通过数值模拟,研究了S809翼型表面沿切向顺时针方向速度运动时的气动性能.从计算结果看出,翼型表面运动能有效抑制或延缓大攻角流动分离,改善翼型的气动性能。在此基础上,为了仅考虑表面的运动效应,消除翼型几何外形对升阻力系数的影响,本文还研究了皮带轮翼型(由大小两个圆柱驱动的皮带轮)的气动特性。计算结果进一步表明,表面运动能有效地抑制翼型吸力面发生大规模流动分离,并可极大地增加翼型升力系数。     

Synthetic Strategies of Carbon Nanobelts and Related Belt-Shaped Polycyclic Aromatic Hydrocarbons

The development of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons has gained momentum in recent years. This Minireview focuses on the synthetic strategies used in constructing these aesthetically appealing molecular nanocarbons. Examples of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons reported in recent years as well as some representative synthetic attempts in earlier times are discussed.     

带式输送机动态分析连续模型振动解法及计算机仿真

以头部驱动尾部张紧（考虑张紧装置的惯性力）的带式输送机为例,建立了基于连续单元的动态分析数学模型,求出这一非齐次混合边界条件问题振动解,并进行计算机仿真．