Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.     

The kinetics of adsorption of tetracycline on chitosan particles

Experiments to monitor and characterize the kinetics of adsorption of tetracycline on chitosan particles are reported in this work. The same pseudo-order kinetics that has been widely used for describing the adsorption in systems related to wastewater purification and drug loading was used to treat the present data. As some unexpected results came out from the experiments, it was necessary a detailed deduction for this sort of kinetics to be carried out, so that approximations related to short and long times were obtained. Firstly it was shown that an apparently linear t/q(t) versus t relationship did not imply a pseudo-second-order sorption kinetics, differently of what has been repeatedly reported in the literature. It was found that this misinterpretation could be avoided by using non-linear regression. Finally, the adsorption of tetracycline on chitosan particles was analyzed, using the insights obtained from theoretical analysis, and the parameters generated were used to analyze to adsorption kinetics and to propose an adsorption mechanism.     

LDH of NiZnFe and its composites with carbon nanotubes and data-palm biochar with efficient adsorption capacity for RB5 dye from aqueous solutions: Isotherm,kinetic, and thermodynamics studies

In the study, the layered double hydroxide (LDH) of NiZnFe and its composites with date-palm biochar (LDH-DPb) and carbon nanotubes (LDH-cnt) were synthesized for adsorbing reactive black 5 (RB5) dye from aqueous solutions. In the first 5 min, rapid adsorption was followed by a gradual increase in both dye uptake and removal efficiency of up to 60 min of starting time. In the investigated pH range (3.0–8.0), the removal efficiency linearly decreased while the sorption capacity linearly increased for all three adsorbents as their doses increased to 0.3 or 0.4 g following a decreasing trend up to 0.6 g. By increasing the initial RB5 concentration from 10 to 100 mg L⁻¹, the removal efficiency linearly decreased. A nearly perfect fitting of the pseudo-second-order kinetic model to the adsorption data was observed; however, the Elovich kinetic model showed the heterogeneous surface of adsorbents with chemisorption. At the solid–liquid interface, from a thermodynamics point of view, we obtained the nonspontaneous nature of the adsorption of RB5 dye of the studied adsorbents with an increased disorder, which supported the endothermic nature onto the studied adsorption process. Furthermore, a nearly perfect fitting of the Langmuir model was obtained to the adsorption data, thereby suggesting the monolayer adsorption of RB5 dye onto the studied adsorbents. In the Dubinin–Radushkevich model, a good agreement of the calculated adsorption capacities to the experimental values were observed and the chemical adsorption of RB5 dye on to the studied adsorbents was proposed based on E (8 – 16 kJ mol⁻¹).     

Selective sorption of fluoride using Fe(III) loaded carboxylated chitosan beads

Chitosan beads (CB) as such have very low defluoridation capacity (DC) of 52 mgF⁻/kg have been suitably modified by carboxylation followed by chelation with Fe³⁺ ion (Fe-CCB), in order to effectively utilize both hydroxyl and amine groups for defluoridation. The modified beads showed enhanced DC to a very significant level of 4230 mgF⁻/kg. The fluoride removal process is governed by both adsorption and complexation mechanism. The sorbent was characterized using Fourier transform infrared spectrometer (FTIR) and scanning electron microscope (SEM) analysis. The experimental data have been analysed using isotherm and kinetic models. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to predict the nature of sorption. A field trial was carried out with fluoride water collected from a nearby fluoride-endemic village.