遥感相机自动检焦技术研究

将基于图像处理的自动检焦技术应用于线阵CCD推扫成像的空间遥感相机中。图像法检焦的关键在于对焦评价函数的选取。通常对焦评价函数是在摄影目标不变的情况下得出的,而推扫成像的线阵CCD相机在任意时刻所拍摄的景物都是不同的,这就给对焦评价函数的选取增加了难度。用功率谱的方法对任意景物在空间频域进行分析表明,功率谱对于自然景物具有一定的不变性。由此建立了基于功率谱的对焦评价函数,采用小波去噪与亮度归一化相结合的图像预处理技术有效地去除了图像噪声和亮度变化对对焦精度的影响。通过对功率谱评价函数进行加权处理,提高了对焦评价函数曲线的灵敏度。仿真实验表明了所构造的对焦评价函数是可行的。     

MO analysis of macroscopic supercurrent flow in MgB 2

We present results from an extended magneto-optical (MO) analysis of two samples cut from high-density pellets of MgB₂. The first sample was studied in order to show that no matter how large the sample is and despite the bulk granularity, the material enters into a critical state in a crystal-like fashion. The second sample was chosen for the quantitative analysis. A numerical approach based on an inverted 2D Biot-Savart model was used to calculate the current paths across the homogeneous polycrystalline bulk, as well as in the vicinity and across some morphological defects. Local current densities in the homogeneous part were estimated as a function of the applied magnetic field at different temperatures, in three regimes: below full penetration, at full penetration and above full penetration, respectively. A hypothesis of interpretation of the apparent absence of magnetic granularity inside the polycrystalline microstructure is presented. It is related to a critical state likely reached by a network of strongly coupled Josephson junctions. Received 31 May 2001 and Received in final form 5 December 2001     

影响DPF焦点装置中子稳定性的因素和改进措施

简要叙述了稠密等离子体聚焦装置作为中子发生器的工作原理，对影响稠密等离子体聚焦装置放电出中子产额及其稳定性的一些因素和改进措施进行了简单讨论．通过使用不同电极形状的场畸变开关很好地提高了焦点装置的运行，使装置输出中子的起伏得到明显的改善．通过对腔内电极的清洁，在不更换气体的条件下，聚焦装置放电出中子产额稳定.The principle of dense plasma focus(DPF) as neutron generator has been investigated in this paper. We have stated briefly some factors that mainly influnce the DPF s neutron yield and some methods improving the stability of neutron yields on the dense plasma focus. It is showed that the fluctuation of DPF output neutron becomes smaller by using different types of field-distortion elements. Over 100 consecutive shots without purging the test gas the neutron yields has no obvious change.     

透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.     

中心—焦点区分问题的I l'yashenko算法

对二维平面系统的二维系统的中心焦点区分问题 ,I l'yashenko曾建议一个算法 ,本文给出此法的详细证明 .据此 ,我们讨论了区分问题在 Arnold意义下的代数可解性与不可解性     

低功率泵浦Ti：Al2O3自锁模激光器

本文报道了低功率泵浦的Ｔｉ：Ａｌ２Ｏ３激光器实现了稳定的自锁模运转，锁模脉冲宽度为１８０ｆｓ。分析了激光器的结构及工作特性。     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

Transition between layered and filamentary types of anisotropy in layered superconducting structures

A model of layered superconducting structure consisting of alternating anisotropic superconducting layers S₁ and S₂ with different transition temperatures is considered. It is shown that due to competition between two origins of anisotropy - effective-mass anisotropy of individual layers and proximity-induced anisotropy the effective anisotropy of the whole system signficiantly varies temperature. The components of the effective-mass tensor m_c (along the anisotropy axis) and m_a (perpendicular to the anisotropy axis) strongly depend upon temperature. This may lead to transition between layered (m_c > m_a) and quasi one-dimensional (m_c < m_a) types of anisotropy as well as to biaxial-type anisotropy which is also temperature dependent. The field distribution in a tilted vortex in a biaxial superconductor is calculated. The change in the properties of the vortex lattice with temperature in such systems is also investigated. The properties of YBa₂Cu₃O_x/PrBa₂Cu₃O_y multilayers are discussed in this connection.     

An fMRI study of magnitude comparison and exact addition in children

By contrast to the adult literature, in which a consistent parietofrontal network for number processing has been identified, the data from studies of number processing in children have been less consistent, probably due to differences in study design and control conditions. Number processing was examined using functional magnetic resonance imaging in 18 right-handed children (8–12 years) from the Cape Coloured community in Cape Town, South Africa, using Proximity Judgment and Exact Addition (EA) tasks. The findings were consistent with the hypothesis that, as in adults, the anterior horizontal intraparietal sulcus (HIPS) plays a major role in the representation and manipulation of quantity in children. The posterior medial frontal cortex, believed to be involved in performance monitoring in more complex arithmetic manipulations in adults, was extensively activated even for relatively simple symbolic number processing in the children. Other areas activated to a greater degree in the children included the left precentral sulcus, which may mediate number knowledge and, for EA, the head of the caudate nucleus, which is part of a fronto-subcortical circuit involved in the behavioral execution of sequences. Two regions that have been linked to number processing in adults — the angular gyrus and posterior superior parietal lobule — were not activated in the children. The data are consistent with the inference that although the functional specialization of the anterior HIPS may increase as symbolic number processing becomes increasingly automatic, this region and other elements of the parietofrontal network identified in adults are already reliably and robustly activated by middle childhood.     

聚焦形貌恢复方法模型设计

采用基于拉普拉斯算符聚焦形貌恢复方法,提出了模拟目标深度测量的数值模型。数值模拟的核心是基于通过几何光学预测的理想图像的卷积与透镜广义孔径函数的多色点扩散函数,即用聚焦误差替代抛物线圆柱形貌或高斯函数。该模型可以使用基于聚焦形貌恢复方法的传感器真实组件参数、光源光谱、光学系统离差、相机的光谱灵敏度。提出了光学系统离差（消球差、消色差、色差）对确定目标表面形貌的精确度和可靠性的影响。结果表明,该模型可以有效提高实验效率,缩短时滞,降低成本。