Thermal degradation behaviors of some branched and linear polysiloxanes

The thermal degradation behaviors of some branched and linear polysiloxanes were studied by thermogravimetric (TG) analysis and infrared (IR) spectroscopy, and the effect of phenyl content on the thermal stability of the tested branched polysiloxanes was investigated. The branched polysiloxanes with phenyl obtain higher thermal stability at lower temperature. The degradation residues of the examined branched polysiloxanes at 800 °C are rather high, 65.1-77.6% in N₂ and 40.5-66.5% in air, respectively. However, the amount of solid residue increases with decrease in phenyl content in both N₂ and air atmospheres. It was found that the thermal stability of the branched polysiloxanes is higher than that of the linear one, which indicated that the branched structure benefits the formation of a crosslink in the solid residue.     

手性液晶聚硅氧烷毛细管柱的制备及应用

合成了一种手性液晶侧链的聚硅氧烷固定液，并涂制成毛细管柱，此柱适合于分离各种取代基的酚类异构体。对柱效和选择性进行了评价。     

杯芳烃交联聚硅氧烷热稳定性能研究

聚有机硅氧烷是一类主链由硅-氧键连接而成,侧链为有机基团的聚合物,兼具有机聚合物和无机聚合物的特性,性能优异,尤以卓越的耐高温性能而著称,在大气中于-50~250℃可以长期使用[1].为了进一步提高聚有机硅氧烷的热稳定性,主要有以下几种方法,(1)添加各种耐热性添加剂,或可与聚     

Palladium-catalyzed synthesis of poly(bromoalkoxy- and bromoalkanoyloxymethylsiloxane)s from poly(hydromethylsiloxane)s

Palladium-catalyzed synthesis of poly(bromoalkoxymethyl- and bromoalkanoyloxymethylsiloxane)s from poly(hydromethylsiloxane)s was studied. Treatment of poly(hydromethylsiloxane)s with mixtures of allyl bromide and cyclic ethers in the presence of a catalytic amount of PdCl₂ gave the corresponding poly[(bromoalkoxy)methylsiloxane]s in good yield. A similar reaction with γ-butyrolactone produced poly[(bromobutanoyloxy)methylsiloxane], although the polymer was highly moisture-sensitive and could not be separated from the reaction mixture. Transformation of the bromoalkoxy unit in the resulting siloxane polymer into an aminoalkoxy group was also examined.     

高分子钯络合物催化的亚胺化合物的加氢反应

制备了一系列以二氧化硅为载体的侧链上含有各种氮配位基团的聚硅氧烷-钯络合物,这些高分子钯络合物能够在常温常压下催化亚胺化合物的加氢反应并表现出不同程度的催化活性.对其中聚-(N,N-二乙酰基)-γ-氨丙基硅氧烷-钯络合物催化的亚苄基苯胺的加氢反应做了比较深入的研究,发现该催化剂在反应中是稳定的并给出唯一的加氢产物,络合物中的N/Pd原子比、反应温度以及不同底物对反应速度的影响也被报道.     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

冠醚改性聚甲基硅氧烷液膜离子传输性能

合成了两种新型的冠醚改性聚甲基硅氧烷，研究了它们作为液膜离子传输载体对离子的传输性能，并考察了膜的稳定性。     

SYNTHESIS AND CHARACTERIZATION OF A NEW POLYSILOXANE CONTAINING N,N’-BIS(DIPHENYLSILYL)TETRAPHENYLCYCLODISILAZANE

A new kind of polysiloxane containing N,N'-bis(diphenylsilyl)tetraphenylcyclodisilazane was prepared by anionicnon-equilibrium polymerization with a "seed solution" as initiator. The monomer, N,N'-bis(hydroxydiphenylsilyl)-tetraphenyl-cyclodisilazane (BHPTPC), was synthesized via the hydrolysis of N,N'-bis(chlorodiphenylsilyl)tetraphenyl-cyclodisilazane (BCPTPC). A new method for the preparation of BCPTPC is also reported here with high yield and simplermanipulation. The synthesized polysiloxane containing N,N'-bis(diphenylsilyl)tetraphenylcyclodisilazane was characterized by ~1H-NMR, ~(29)Si-NMR, gel permeation chromatography (GPC) and intrinsic viscosity.     

Synthesis of poly(styrene-co-3-trimethoxysilyl propyl methacrylate) microspheres coated with polysiloxane layer

A procedure has been developed to coat micron-sized poly(styrene-co-3-trimethoxysilyl propyl methacrylate) microspheres with a smooth layer of polysiloxane by the hydrolysis and condensation of methyl trimethoxylsilane (MTMS). Firstly, polystyrene microspheres containing silanol groups were prepared by conventional dispersion polymerization using 3-(trimethoxysilyl) propyl methacrylate (MPS) as a functional comonomer in an ethanol/water medium. Secondly, the synthesis of the polysiloxane shell was carried out using a sol–gel process of MTMS. The thickness of the shells can be easily varied with different copolymer seeds and MTMS feed ratio. When we used copolymer particles with 2.00 μm diameter as seeds, the thickness of the polysiloxane shells can be varied from 0.10 to 0.18 μm. The core/shell structure of the composite microspheres was characterized by transmission electron microscope (TEM).     

ATRP grafting of styrene from benzyl chloride functionalized polysiloxanes: An AFM and TGA study of the Cu(0)/bpy catalyst

Various combinations of Cu(0), CuCl, 2,2′-bipyridine (bpy) and 1,10-phenanthroline (phen) were used as catalysts for the grafting polymerizations of styrene from polysiloxane macroinitiators functionalized with benzyl chloride. While Cu(0)/bpy alone promotes the grafting, narrower polydispersities were obtained in the presence of CuCl. Analysis of the Cu(0) surface before and after polymerization by a combination of AFM, TGA and FTIR investigations reveals the formation of bpy or phen films on Cu(0). In the presence of CuCl, the ligand film appears decorated with CuCl particles which increase in size with increasing the CuCl concentration. The initial layer occurs most likely as a result of complexation between the ligands and the Cu(0) surface and acts as a support for the rest of the film. These observations are consistent with the film formation on Cu(0) from related nitrogen donors and indicate that the reactivity of the Cu surface may depend not only on its prior treatment but also on the deposition of ligands from the reaction mixture.