排序方式: 共有65条查询结果,搜索用时 15 毫秒
1.
(甲基)丙烯酸酯的基团转移聚合 总被引:2,自引:5,他引:2
<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近 相似文献
2.
采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%. 相似文献
3.
A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings. 相似文献
4.
The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study. 相似文献
5.
研究玉米淀粉接枝聚丙烯酸酯共聚物的各级结构,主要探讨去除均聚物和玉米淀粉侧链的方法。发现以环己烷为溶剂,用索氏萃取法除去均聚物比用苯萃取法时间短、效果好;用HCl酸解法除去淀粉侧链比用HClO4氧化法简单实用。用红外光谱进一步验证了各级结构的官能团,证实了所合成的共聚物是玉米淀粉接枝聚丙烯酸酯共聚物。 相似文献
6.
Polyacrylate/silica nanocomposite was prepared by sol-gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), γ-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanocomposite was investigated in details. Dynamics Laser Scattering (DLS) indicated that the average diameter of the polyacrylate/silica latex particles (177 nm) was bigger than that of the pure polyacrylate latex particles (105.3 nm), but the ζ potential of polyacrylate/silica was decreased respectively in contrast to that of the polyacrylate. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature of polyacrylate/nano-SiO2 (Tg = −24 °C) was higher than that of polyacrylate (Tg = −36 °C). UV analysis showed that the UV absorbency of polyacrylate/silica was improved evidently in contrast to that of polyacrylate. 相似文献
7.
Comparative study between core-shell and interpenetrating network structure polyurethane/polyacrylate composite emulsions 总被引:2,自引:0,他引:2
Anionic aqueous polyurethane dispersion was prepared by using carboxyl acid group to make the polyurethane dispersible, and then nanograde core-shell and crosslinked IPN structure polyurethane/polyacrylate composite latex (PUA) were synthesized by soap-free emulsion polymerization method with polyurethane dispersion as seed. FTIR, DSC, dynamic light scattering, TEM, ESCA, TGA, electronic tensile machine were employed to investigate the structures and properties of the composite latex and their polymers. Meanwhile the core-shell composite PUA emulsion and the crosslinked IPN composite PUA emulsion were compared. The results showed that the particle morphology of PUA composite emulsion is inverted core-shell structure with polyacrylate as the core and with polyurethane as the shell. The morphology of the crosslinked PUA emulsion was multi-core structure. The surface in core-shell PUA contains rich PU phase. The phase structure of the crosslinked PUA is more uniform. Three transition temperatures are observed for the core-shell composite PUA, two transitions are observed for the film from the crosslinked PUA. The TGA curves of core-shell PUA and crosslinked PUA exhibit two stages, the first stage corresponds to the thermal decomposition of hard segments in seed polyurethane; the second stage corresponds to the decomposition of soft segments in PUA and decomposition of polyacrylate. With the increase of glycidyl methacrylate (GMA) amounts in PUA composite emulsions, the tensile strength of the PUA films as well as the average diameter of the PUA composite emulsion particles increase, the elongation at break of the PUA films decreases. 相似文献
8.
Nano-TiO2 is modified by a method, by which nano-TiO2 first reacts with silane coupling agent WD-70 with double bond group which subsequently copolymerizes with methyl methacrylate and butyl acrylate to produce a thin polymer shell on the nanoparticles. The modified nanoparticles have stable organophilicity. They are applied to polyacrylate coating and performances of the coating are measured by different methods. The modification of nano-TiO2 particles can improve their dispersibility in coating, enhance hardness of coating and reduce water absorption and permeability of polyacrylate coating. The mechanism has been analyzed in this paper. 相似文献
9.
Structure and properties of polyurethane/polyacrylate latex interpenetrating networks hybrid emulsions 总被引:3,自引:0,他引:3
Some new kinds of novel polyurethane (PU)/polyacrylate (PA) latex interpenetrating networks (LIPNs) were synthesized. Firstly PU dispersions were synthesized by self-emulsification polymerization. Then PU/PA LIPNs using PU dispersion as the seed were prepared by soap free emulsion polymerization. The effects of different PU/PA ratios, the blending method and the NCO/OH molar ratio of PU components on PU/PA LIPNs performance were also investigated. The structure and properties of PU/PA LIPNs such as mechanical properties, particle size, morphology of the surface were characterized by dynamic mechanical analysis, scanning electron microscopy, and dynamic light scattering. It was found that PU/PA LIPNs can markedly improve the water resistance and the mechanical properties of PU latex much more than those of PU/PA physical blends due to a great deal of interpenetrating and entangling between PU and PA latex. Moreover, the particle size of PU/PA LIPNs is related to the PA content and NCO/OH molar ratio of PU components: the higher the NCO/OH molar ratio in PU dispersions, the larger is the particle size of PU/PA LIPNs, and the average particle size of PU/PA LIPNs becomes larger with an increase in PA content. 相似文献
10.