Behaviour of organic pollutants in paper and board samples intended to be in contact with food

This paper deals with the study of volatile compounds present in a set of three paper and board (P&B) samples of different composition, surface treatment, grammage and thickness. The volatile compounds released by the packaging material (P&B) can be trapped on the food and may then affect the safety and health of consumers. To evaluate if the recycled P&B could be used as food packaging material, adsorption studies have been performed with a selection of chemical substances. The adsorption isotherms are provided. Partition coefficients between paper and air have been calculated for a series of volatile compounds used as model compounds to represent different families of contaminants commonly present in P&B. Values from 4 to 3243 were obtained at different temperatures. The analysis of volatile compounds have been carried out by automatic headspace coupled on-line with GC/MS in SIM mode. The results obtained are shown and discussed.     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Novel titanate nanotubes-cyanocobalamin materials: Synthesis and enhanced photocatalytic properties for pollutants removal

New hybrid nanomaterials, with improved photocatalytic performance in pollutants removal, were obtained through the modification of titanate nanotubes (TNT) with a cobalt porphyrin, the cyanocobalamin, also knowing as vitamin B12 (B12). The nanocrystalline TNT were produced by hydrothermal treatment and after treated with cobalamin to produce B12-TNT materials. The characterization of the new hybrid material was performed by XRD, FTIR, TEM-EDS, DRS, XPS and ICP. The results show that the immobilization of the cobalt containing specie is dependent on the point of zero charge of the TNT and no modifications on the structure and morphology were observed. No significant changes in the optical band gap were observed after B12 incorporation, but an increasing in the visible light absorption, which arises from charge transfer and d–d transitions of the cobalt, was visualized. The samples photocatalytic performance was studied for the hydroxyl radical production and the highest catalytic ability was achieved by the B12-HTNT sample. The catalytic ability of these new hybrid nanomaterials for two model pollutants photodegradation, phenol and rhodamine B (RhB) was investigated. For both pollutants, the best results were achieved using B12-HTNT with a removal of 94% of a 10 ppm RhB and 87% of a 20 ppm phenol solution in 90 min of irradiation (150 mL, 0.2 g catalyst/L).     

In silico and in vitro assessment of androgen receptor antagonists

There is a growing concern for male reproductive health as studies suggest that there is a sharp increase in prostate cancer and other fertility related problems. Apart from lifestyle, pollutants are also known to negatively affect the reproductive system. In addition to many other compounds that have been shown to alter androgen signaling, several environmental pollutants are known to disrupt androgen signaling via binding to androgen receptor (AR) or indirectly affecting the androgen synthesis. We analyzed here the molecular mechanism of the interaction between the human AR Ligand Binding Domain (hAR-LBD) and two environmental pollutants, linuron (a herbicide) and procymidone (a pesticide), and compared with the steroid agonist dihydrotestosterone (DHT) and well-known hAR antagonists bicalutamide and enzalutamide. Using molecular docking and dynamics simulations, we showed that the co-activator interaction site of the hAR-LBD is disrupted in different ways by different ligands. Binding free energies of the ligands were also ordered in increasing order as follows: linuron, procymidone, DHT, bicalutamide, and enzalutamide. These data were confirmed by in vitro assays. Reporter assay with MDA-kb2 cells showed that linuron, procymidone, bicalutamide and enzalutamide can inhibit androgen mediated activation of luciferase activity. Gene expression analysis further showed that these compounds can inhibit the expression of prostate specific antigen (PSA) and microseminoprotein beta (MSMB) in prostate cell line LNCaP. Comparative analysis showed that procymidone is more potent than linuron in inhibiting AR activity. Furthermore, procymidone at 10 μM dose showed equivalent and higher activity to AR inhibitor enzalutamide and bicalutamide respectively.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

Nano organic carbon and soot in turbulent non-premixed ethylene flames

Spectral optical techniques are combined to characterise the distribution of large-molecule soot precursors, nanoparticles of organic carbon, and soot in two turbulent non-premixed ethylene flames with differing residence times. Laser-induced fluorescence, laser-induced incandescence and light scattering are used to define distributions across the particle size distribution. From the scattering and laser-induced emission measurements it appears that two classes of particles are formed. The first ones are preferentially formed in the fuel-rich region of the flame closer to the nozzle, have sizes of the order of few nanometers but are not fully solid particles, because the constituent molecules still maintain their individual identity exhibiting strong broadband fluorescence in the UV. The second class of particles constituted by solid particles, with sizes of the order of tens of nanometers are able to absorb a sufficient number of photons to be heated to incandescent temperatures. These larger particles are formed at larger residence times in the flame since they are the result of slow growth processes such as coagulation or carbonization. The flames are also modeled in order to produce mixture fraction maps. A new discovery is that nanoparticles of organic carbon concentration, unlike soot, does correlate well with mixture fraction, independent of position in the flame. This is likely to be a significant benefit to future modelling of soot inception processes in turbulent non-premixed flames.     

Chlamydomonas reinhardtii genetic variants as probes for fluorescence sensing system in detection of pollutants

The unicellular green alga Chlamydomonas reinhardtii is employed here for the setup of a biosensor demonstrator based on multibiomediators for the detection of herbicides. The detection is based on the activity of photosystem II, the multienzymatic chlorophyll–protein complex located in the thylakoid membrane that catalyzes the light-dependent photosynthetic primary charge separation and the electron transfer chain in cyanobacteria, algae, and higher plants. Several C. reinhardtii mutants modified on the D1 photosystem II protein are generated by site-directed mutagenesis and experimentally tested for the development of a biosensor revealing the modification of the fluorescence parameter (1 − V _J) in the presence of herbicides. The A250R, A250L, A251C, and I163N mutants are highly sensitive to the urea and triazine herbicide classes; the newly generated F255N mutant is shown to be especially resistant to the class of urea. It follows that the response of the multibiomediators is associated to a particular herbicide subclass and can be useful to monitor several species of pollutants.     

The significance of changes in Mytella falcata (Orbigny, 1842) gill filaments chronically exposed to polluted environments

The impact of pollutants in an organism can be observed by changes in functional complexity at different levels. Bivalve gills are suitable for histopathological analysis because of their structure and function. This study aimed at examining the morphology of Mytella falcata gill filaments from three sites in the Santos estuary (São Paulo, Brazil) with different levels of environmental degradation to identify possible changes in gill structure and discuss the significance of these alterations. For this purpose, histological, histochemical and ultrastructural techniques were used. The filaments of animals from site A (less impacted site) were intact, while in sites B and C, pathological changes were observed, such as: detachment of the epithelium in the intermediate zone, morphological changes of this epithelium, inflammatory process, increase in the number of mucous cells and cell turnover processes. These results suggest that the related changes are an attempt to prevent the entrance of pollutants through gill filaments into the entire organism and that cell turnover is the final way to compensate cell injury.     

Simultaneous Gas Chromatographic Determination of Nitrobenzene and 2,4-Dinitrophenol in Nitrobenzene Manufacturing Plant Wastewater

Abstract

A simple and rapid gas chromatographic procedure is described for the identification and quantification of pollutants in the nitrobenzene manufacturing plant wastewater. The samples were extracted with methylene chloride and subsequently nitrobenzene and 2,4-dinitrophenol were analysed by GC using FID. The method was found to be precise and accurate and applicable for monitoring the effluent treatment system at ppm levels.     

Nanomaterials for electrochemical detection of pollutants in water: A review

The survival of living beings, including humanity, depends on a continuous supply of clean water. However, due to the development of industry, agriculture, and population growth, an increasing number of wastewaters is discarded, and the negative effects of such actions are clear. The first step in solving this situation is the collection and monitoring of pollutants in water bodies to subsequently facilitate their treatment. Nonetheless, traditional sensing techniques are typically laboratory-based, leading to potential diminishment in analysis quality. In this paper, the most recent developments in micro- and nano-electrochemical devices for pollutant detection in wastewater are reviewed. The devices reviewed are based on a variety of electrodes and the sensing of three different categories of pollutants: nutrients and phenolic compounds, heavy metals, and organic matter. From these electrodes, Cu, Co, and Bi showed promise as versatile materials to detect a grand variety of contaminants. Also, the most commonly used material is glassy carbon, present in the detection of all reviewed analytes.