Evidence of a Photo‐Radical Pathway Responsible of the Rearrangement of a Manganese(III)‐Schiff Base Complex in Solution

A new Mn^III‐Schiff base complex, [MnL(OH₂)](ClO₄) ( 1 ) (H₂L = N, N′‐bis‐(3‐Br‐5‐Cl‐salicylidene)‐1, 2‐diimino‐2‐methylethane), an inorganic model of the catalytic center (OEC, Oxygen Evolving Complex) in photosystem II (PSII), has been synthesized and characterized by elemental analysis, IR and EPR spectroscopy, mass spectrometry, magnetic susceptibility measurement and the study of its redox properties by cyclic and normal pulse voltammetry. This complex mimics reactivity (showing a relevant photolytic activity), and also some structural characteristics (parallel‐mode Mn^III EPR signal from partially assembled OEC cluster) of the natural OEC. The complex 1 was found to rearrange in solution into a crystallographically solved square‐pyramidal complex, [MnLL′] ( 2 ) (HL′ = 6‐bromo‐4‐chloro‐2‐cyanophenol), through a process, which probably liberates radical species (detected by EPR), and provokes a C—N bond cleavage in the ligand. A photo‐radical mechanism is discussed to explain this rearrangement.     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

液晶光定向层材料

本文综述了近10年来液晶显示用光定向层材料领域的研究现状和进展情况，主要概述了光降解型、光致异构型、光交联型以及自组装等材料，并对目前报道的液晶光定向机理进行了总结和归纳。     

A new imidazolylquinoline for organic thin film transistor

A new active electronic material, 2-(naphtho[3,4]imidazol-2-yl)quinoline (NIQ), 1, has been synthesized and fully characterized. This compound exhibits field-effect carrier mobility and behaves as a p-type semiconductor (μ_FET = 0.148 cm²/V s at V_DS = 10 V). NIQ and its related imidazolylquinoline compounds may have possible applications as active materials in organic thin film transistors.     

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induceddoping method. In this method a copolymer of vinylidene chloride and methyl acrylate(VCMAC) was used as photo acid generator which can release proton when it is exposedto ultraviolet light (λ= 254 nm). The structure of PANI-VCMAC system before and afterirradiation was characterized by elemental analysis, IR, XPS, and SEM images. Resultsobtained indicate that the photo-induced doping characteristics, such as doping positionand type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (～10~(-5)S/cm) of PANI-VCMAC system after irradiation maybe due to low doping degree (～pH= 3) and the difference in morphology as compared withPANI-HCl film.     

Spectral,Optical and Mechanical studies on pure and thiourea doped ammonium di-hydrogen phosphate NLO single crystals

Pure and thiourea substituted single crystals of ammonium di-hydrogen phosphate have been grown from aqueous solution by isothermal solvent evaporation technique. Doped crystal exhibits prominent changes in physical and chemical properties. Single crystal XRD analyses of the samples are carried out and the results are compared. FTIR and UV–vis–NIR spectral analyses have been employed to identify the presence of various functional groups and the UV cut-off range in the grown crystals. Density measurements have been made and Photoconductivity studies revealed the negative photo conducting nature. Hardness measurement shows that the mechanical strength of the doped crystal is high when compared to pure ammonium di-hydrogen phosphate. The dielectric response of the samples has been studied in the frequency range 100 Hz–5 MHz at room temperature and the results are discussed.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.     

红外光谱法研究重氮树脂自组装膜的光化学反应

将具有导电功能的聚(4-羧酸钠苯基)乙炔阴离子(PCPA)与具有生物活性的DNA聚阴离子交替与重氮树脂聚阳离子(DR)进行自组装,可以得到层重复单元为DR／DNA／DR／PCPA的三夹层聚电解质自组装膜。重氮树脂聚阳离子在紫外光照射下可与聚阴离子发生光化学反应,使层与层之间的离子键连接转化为共价键连接,从而制备稳定的纳米级超薄膜。本文用红外光谱法对此类聚电解质自组装膜的光化学反应过程进行了研究。     

含偶氮苯类星型液晶化合物的光致变色

研究了一种以Si为中心外围含4个丁氧基偶氮苯液晶基元的星型液晶化合物Si(AZO)4的光致变色规律,利用紫外-可见吸收光谱研究了在氯仿和四氢呋喃溶液中的量子产率、光致变色和光回复反应.实验结果表明样品在各溶液的光致变色和光回复反应均为一级动力学反应,并求算了光致变色反应的正、逆反应速率常数均为10-1s-1数量级,是偶氮类侧链液晶高分子的速率常数的107倍,表明Si(AZO)4的星型结构对末端偶氮基团的吸收光谱没有明显影响,产物具有类似小分子的光致变色性,并且Si(AZO)4的正、逆反应速率常数比值小于液晶基元的比值,表明具有更好的光可逆性,有望作为光控开关和新型信息功能材料.     

Effect of environment on the degradation of starch and pro-oxidant blended polyolefins

The aim of this study was to understand the rate of degradation of commercial pro-oxidant blended and starch blended High Density Polyethylene (HDPE), pro-oxidant blended Low Density Polyethylene (LDPE), and starch blended polypropylene in three different environments, namely under direct sunlight, buried in soil and immersed in marine waters for a period of 150 days. The bio-fouling parameters were also monitored in the case of polymers deployed in sea water. Exposure to sunlight showed highest weight loss (>10%) and samples buried in soil showed the lowest (∼1%). Pro-oxidant blended HDPE showed higher weight loss when compared to starch blended (22.7 as against 11%). Scanning electron microscopy revealed surface deterioration and decrease in contact angle indicated reduction in surface hydrophobicity. Increase in the carbonyl and hydroxyl groups in the infra-red spectrum of the exposed samples suggested abiotic degradation. Starch blended PP exposed to sunlight showed the highest thermo gravimetric weight loss (63.8%) followed by the same polymer buried in soil (46.1%).