光电对抗在现代防空作战中的应用与展望

在综述光电对抗内涵的基础上，论述光电对抗在现代战争作战平台中的具体应用，并着重从电子战的角度论述了光电对抗在现代防空作战中的最新应用。最后指出光电对抗技术在未来电子战中的作用和发展方向。     

A surface-mounted device assembly technique for small optics based on laser reflow soldering

The three-dimensional miniaturized optical surface-mounted device (TRIMO-SMD) is a new flexible and automated assembly technique for small optical components (maximum diameter for a lens is 2 mm) based on laser reflow soldering technique. This technology can be compared to the electronic SMD technique but applied to micro-optical devices. We present some recent developments of TRIMO-SMD in its application to industrial products.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.     

Can a ‘magnesium sulfate admixtured l-threonine’ crystal be grown by slow evaporation solution growth method?

Slow evaporation of an aqueous solution containing l-threonine and magnesium sulphate heptahydrate, results in the fractional crystallization of the less soluble l-threonine crystal and not any novel optoelectronic ‘magnesium sulfate admixtured l-threonine’ crystal as reported by Puhal Raj et al. in Optik, 124 (2013) 6887–6891.     

Effect of thickness of CdTe/Ge heterojunction photodetectors on optoelectronic properties

The influence of the thickness of CdTe/n-Ge heterojunction photodetectors on I–V curves was studied experimentally and theoretically. The thicknesses of the CdTe thin films were 110, 130, 150, and 200 nm. The power intensity of illumination was 150 mW/cm². Increasing the thickness led to an increase in photocurrent.     

Improved anti-inflammatory and anticancer properties of celecoxib loaded zinc oxide and magnesium oxide nanoclusters: A molecular docking and density functional theory simulation

Present study offers great prospects for the adsorption of anti-inflammatory celecoxib molecule (CXB) over the surface of zinc oxide (Zn₁₂O₁₂) and magnesium oxide (Mg₁₂O₁₂) nanoclusters in several environments by performing robust theoretical calculations. Density functional theory (DFT), time-dependent density functional theory (TDDFT) and molecular docking calculations have been extensively carried out to predict the foremost optimum site of CXB adsorption. It has been observed that the CXB molecule prefers to be adsorbed by its SO₂ site on the Zn-O and Mg-O bonds of the Zn₁₂O₁₂ and Mg₁₂O₁₂ nanoclusters instead of NH₂ and NH sites, where electrostatic interactions dominate over the bonding characteristics of the conjugate complexes. Furthermore, the presence of interactions between the CXB molecule and nanoclusters has also been evidenced by the UV–Vis absorption spectra and IR spectra. Molecular docking analysis has revealed that both adsorption states including CXB/Zn₁₂O₁₂ and CXB/Mg₁₂O₁₂ have good inhibitory potential against protein tumor necrosis factor alpha (TNF-α) and Interleukin-1 (IL-1), and human epidermal growth factor receptor 2 (HER2). Hence they might be explored as efficient TNF-α, IL-1, and HER2 inhibitors. Hence from the study, it can be anticipated that these nanoclusters can behave as an appropriate biomedical carrier for the CXB drug delivery.     

Coulomb screening effects on the optoelectronic far-infrared properties of spatially separated few-layer graphene

We investigate the longitudinal optical conductivity of spatially separated few-layer graphene analytically and numerically. Each layer could be monolayer or bilayer graphene. The density–density correlation function has been screened by the dielectric function using the random phase approximation, which includes the inter-layer Coulomb coupling. In the presence of the potential function between the layers, the carrier densities in each layer can be tuned respectively. In these two-dimensional layered structures, the main contributions to the optical conductivity are from the intra- and inter-band transition channels in a same layer. In the infrared region, the Drude optical conductivity was observed by the unscreened intra-band transition process. But in the presence of the inter-layer Coulomb interaction, one peak structure of the optical conductivity is observed which can be modified by the dielectric environment. From the number of turning points and the turning positions, the carrier density, the Fermi wavevector, and the layered structure can be determined.     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

High-performance 850 nm vertical-cavity surface-emitting laser in Gigabit Ethernet network

High-performance oxide vertical-cavity surface-emitting (VCSEL) laser is fabricated, and its usefulness is demonstrated as a suitable transmitting light source at 850 nm operating wavelength for Gigabit Ethernet application. Utilization of barrier reduction layers reveals low-threshold current requirement for operation at high modulation bandwidth. The electrical and optical characteristics, measured from the fabricated VCSEL, are simulated for Gigabit Ethernet transmission. Data rates of 1.25 Gbps with a bit error rate of 10⁻¹¹ are achieved by the use of a specific multimode network simulator.     

Design of organophosphorus materials for organic electronics and bio-applications

π-Extended molecules are key components for the development of materials science. In fact, polyaromatic structures are fundamental for the scientific and technological progress of fields such as organic electronics and bio-applications. Beneficial properties of π-extended structures are absorption in the visible region, often luminescence, high electron mobilities and stability. Common approaches to adjust the properties of polyaromatic structures to functional setups involve changes in shape and size at the molecular level. Recently, incorporating hetero-elements emerged as successful approach. In this regard, organophosphorus conjugated molecules are new materials holding great promise for potential applications. In this review, we comprehensively discuss the design/development of polyaromatic phosphorus materials and their applicability. We establish structure/property/applicability relationships to provide key guidelines for the engineering of newer, future applications. This article thus provides a source of information for the further development of this rapidly evolving field of research.