Bi12TiO20纳米粉体的制备及其光吸收特性研究

以钛酸四丁酯和硝酸铋为原料 ,利用化学溶液分解法制备了Bi12 TiO2 0 纳米多晶粉体 .采用XRD和TEM对其结构和形貌进行了表征 .结合热重 差热 (TG DTA)分析 ,探讨了Bi12 TiO2 0 晶相的形成机理 .通过UV Vis漫反射谱的测定 ,研究了Bi12 TiO2 0 纳米晶粉体的光吸收特性 .结果显示 ,从组成为化学计量比的前驱液中可以很容易制得纯Bi12 TiO2 0 纳米晶粉体 ,该Bi12 TiO2 0 纳米晶粉体呈现了在很宽的波长范围内 (5 6 0～ 385nm )对光的吸收的特性 .     

Precipitation and characterization of uniform submicrometer lead titanate particles. Part II: Reaction mechanism

The chemical mechanism of the precipitation of lead titanium peroxohydroxide particles in a solution of nitrilotriacetate (NTA) complexes of lead and titanium peroxo-hydroxide is envisioned as the interaction between cations of lead hydroxide and anions of polymeric titanium peroxo-hydroxide.     

Effect of post-metallization annealing on the ferroelectric properties of sol-gel derived PZT thin films

A series of monolithic Pt-PZT-Pt capacitors was prepared based on sol-gel derived PZT 53/47 films fired to 700 C. After deposition of top Pt electrodes, the capacitors were subjected to post-metallization annealing (PMA) temperatures of 100 C to 700 C. Dielectric and ferroelectric (FE) characterizations were performed. Increasing the PMA temperature produced lower values of spontaneous and remanent polarizations, dielectric constant and leakage currents. The observations are correlated with a proposed FE capacitor model.     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Preparation of nanosized ZnO using α brass

Nanosized ZnOs were synthesized on the surface of α brass coated a film of nickel catalyst at 500-700 °C under atmosphere of O₂ and CH₄ gases. The nanosized ZnOs have shapes including pillar, leaf, sheet and rod, which were determined by the synthesis temperature and the flow rates of O₂ and CH₄ gases. The nanosized ZnOs were characterized by electron microscopy including transmission electron microscope for crystal structure, morphology and high resolution images, both field emission scanning electron microscope and scanning electron microscope for morphology, and energy dispersive X-ray spectroscope equipped in electron microscope for chemical composition. A mechanism was proposed for the growth of nanosized ZnO obtained in this work.     

掺杂SrTiO3体系上甲烷氧化偶联反应的研究—活性氧物种的作用

本文采用循环氧化还原法,脉冲反应及TPD等实验手段对钙钛矿型氧化物掺杂SrTiO_3体系上甲烷氧化偶联反应中的活性氧物种的作用进行了研究.结果表明,催化剂由于掺杂产生的未被充分还原的氧物种(O~(α-)(0<α<2)是活化甲烷并促使其发生偶联反应的主要的活性中心,而表面晶格氧(O_L~(2-))则主要使甲烷深度氧化;消耗掉的未被充分还原的氧或晶格氧可以在高温下氧气氛中氧化复原.对于掺杂的SrTiO_3样品,体相中的氧在惰性气氛或还原气氛中可以向表面扩散.吸附氧可能不直接与甲烷作用而主要通过催化剂表面活性氧物种(O~(α-)或O_L~(2-))而起作用.     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

Darstellung und Kristallstruktur von TICu[CuO2]

Investigations on Electronically Conducting Oxide Systems. XVI. Solid Solutions and Conductivity in the System MgTi₂O₅? Ti₃O₅ Solid solution formation is reported for the system Mg_1–xTi_2–x^IVTi_2x^IIIO₅. With increasing x there is at room temperature a transition from the orthorhombic pseudobrookite structure to the monoclinic low-temperature modification of Ti₃O₅. The X-ray diffraction pattern results are supported by DSC measurements, electrical and magnetic investigations. The tendency of Ti? Ti pair formation in the low-temperature Ti₃O₅ structure is accompanied by a drop of the activation energy for electrical conductivity and a decreasing susceptibility at high Ti^III concentrations.     

Preparation and catalytic performance of superfine Ni/BaTiO3 catalyst

Superfine Ni/BaTiO₃ catalysts were prepared by impregnation method and used successfully for CO₂ reforming CH₄ to syngas. The effects of preparation method and the temperatures of calcination, reduction and reaction on the catalytic activity of the Ni/BaTiO₃ system were investigated. This revised version was published online in June 2006 with corrections to the Cover Date.