Adsorption of CO gas molecules on zigzag BN/AlN nanoribbons for nano sensor applications

First-principle calculations have been performed to study the sensing of CO gas in various considered configurations. The adsorption of CO on zigzag BN nanoribbon (ZBNNR) and zigzag AlN nanoribbon (ZAlNNR) was modelled in five different possibilities. The effect of CO adsorption is to reduce the band gap in both types (BN/AlN) of the nanoribbons. Interestingly, a finite magnetic moment (0.96 ${\mu }_B$ for ZBNNR and 0.69 ${\mu }_B$ for ZAlNNR) has been obtained which depends upon the adsorption configuration of CO. Half-metallicity was also observed upon selective CO adsorption on ZAlNNR irrespective of the ribbon width. Present findings suggest that CO gas molecules could be detected through adsorption on BN/AlN nanoribbons via changes in electronic and/or magnetic properties.     

Band gap engineering in silicene: A theoretical study of density functional tight-binding theory

In this work, we performed first principles calculations based on self-consistent charge density functional tight-binding to investigate different mechanisms of band gap tuning of silicene. We optimized structures of silicene sheet, functionalized silicene with H, CH₃ and F groups and nanoribbons with the edge of zigzag and armchair. Then we calculated electronic properties of silicene, functionalized silicene under uniaxial elastic strain, silicene nanoribbons and silicene under external electrical fields. It is found that the bond length and buckling value for relaxed silicene is agreeable with experimental and other theoretical values. Our results show that the band gap opens by functionalization of silicene. Also, we found that the direct band gap at K point for silicene changed to the direct band gap at the gamma point. Also, the functionalized silicene band gap decrease with increasing of the strain. For all sizes of the zigzag silicene nanoribbons, the band gap is near zero, while an oscillating decay occurs for the band gap of the armchair nanoribbons with increasing the nanoribbons width. At finally, it can be seen that the external electric field can open the band gap of silicene. We found that by increasing the electric field magnitude the band gap increases.     

Electronic properties of α-graphyne nanoribbons under the electric field effect

In this paper, we investigate the electronic structure of both armchair and zigzag α-graphyne nanoribbons. We use a simple tight binding model to study the variation of the electronic band gap in α-graphyne nanoribbon. The effects of ribbon width, transverse electric field and edge shape on the electronic structure have been studied. Our results show that in the absence of external electric field, zigzag α-graphyne nanoribbons are semimetal and the electronic band gap in armchair α-graphyne nanoribbon oscillates and decreases with ribbon's width. By applying an external electric field the band gap in the electronic structure of zigzag α-graphyne nanoribbon opens and oscillates with ribbon width and electric field magnitude. Also the band gap of armchair α-graphyne nanoribbon decreases in low electric field, but it has an oscillatory growth behavior for high strength of external electric field.     

扶手椅型二硫化钼纳米带的电子结构与边缘修饰

采用基于密度泛函理论的第一性原理计算方法, 研究了扶手椅型二硫化钼纳米带的几何构型与电子结构, 发现其稳定性与电子性质敏感地依赖于边缘修饰. 随着边缘修饰的H原子数增加, 纳米带变得更加稳定, 并在间接带隙半导体、半金属和直接带隙半导体之间转变. 纳米带的能带结构和电子态密度显示, 其费米能级附近的能带主要由边缘态贡献. 当二硫化钼纳米带两边用不同数目的H原子修饰时, 纳米带同时具有由这两种修饰引起的边缘态并且两种边缘态的相互影响很小. 研究了三类纳米带带隙与宽度的关系, 对于每个原胞修饰0个或8个H原子的纳米带, 带隙随宽度以3为周期振荡变化; 而对于每个原胞修饰4个H原子的纳米带, 带隙振荡不再具有周期并且振荡幅度变小.     

Effect of post heat treatment on microstructure and photocatalytic activities of TiO2 nanoribbons

Low-dimensional TiO₂ nanoribbons were synthesized by a simple one-step hydrothermal method. The TiO₂ nanoribbons were calcined over the temperature range 200-800 °C in order to enhance their photocatalytic properties by altering their crystal phase and increasing crystallization. Effects of hydrothermal temperature, calcinated temperature and calcination time on the formation of nanostructures have been observed and characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The (BET) specific surface area of the samples which with different post treatments were determined by N₂ absorption-desorption experiment. In addition, photocatalytic activities of the nanoribbons were evaluated by photodegradation of organic dyes methyl orange under the radiation of UV light. The results reveal that the post-treatments have great effects on the microstructures and the photocatalytic activities of TiO₂ nanoribbons.     

A simple method for large-scale preparation of ZnS nanoribbon film and its photocatalytic activity for dye degradation

ZnS nanoribbon film has been successfully prepared by solvothermal treating of Zn foil and S powder in hydrazine hydrate without any surfactant and post-high temperature treatment. The prepared samples were characterized by XRD, SEM and PL. Results show that the obtained films were with high crystallinity and uniformity. The obtained samples were used as a photocatalyst for degradation of dye X-3B, and results show that the dye can be photocatalytically degraded with high rate by as-prepared ZnS nanoribbon film under UV light irradiation.     

Bis-peri-dinaphtho-rylenes: Facile Synthesis via Radical-Mediated Coupling Reactions and their Distinctive Electronic Structures

Polycyclic aromatic hydrocarbons (PAHs) with a one-dimensional (1D), ribbon-like structure have the potential to serve as both model compounds for corresponding graphene nanoribbons (GNRs) and as materials for optoelectronics applications. However, synthesizing molecules of this type with extended π-conjugation presents a significant challenge. In this study, we present a straightforward synthetic method for a series of bis-peri-dinaphtho-rylene molecules, wherein the peri-positions of perylene, quaterrylene, and hexarylene are fused with naphtho-units. These molecules were efficiently synthesized primarily through intramolecular or intermolecular radical coupling of in situ generated organic radical species. Their structures were confirmed using X-ray crystallographic analysis, which also revealed a slightly bent geometry due to the incorporation of a cyclopentadiene ring at the bay regions of the rylene backbones. Bond lengh analysis and theoretical calculations indicate that their electronic structures resemble pyrenacenes more than quinoidal rylenes. That is, the aromatic sextets are predominantly localized along the long axis of the skeletones. As the chain length increases, these molecules exhibit enhanced electronic absorption with a bathochromic shift, and multiple amphoteric redox waves. This study introduces a novel synthetic approach for generating 1D extended PAHs and GNRs, along with their structure-dependent electronic properties.     

First-principles calculations of magnetic edge states in zigzag CrI3 nanoribbons

CrI₃ monolayer has recently drawn much attention due to its two-dimensional long range ferromagnetic order. We find that CrI₃ nanoribbons, which are strips of CrI₃ monolayer, can be used as building blocks of nanodevices. In this paper, we studied the atomic and electronic structures of CrI₃ zigzag nanoribbons by using first-principles calculations. CrI₃ zigzag nanoribbons are also ferromagnet. Interestingly, edge states exist in the system and play an important role in their electronic structures. They dominate the band structures around Fermi level and can be tuned by edge atomic structures. The intrinsic ferromagnetism and rich electronic structures enable CrI₃ zigzag nanoribbons a group of promising candidate materials for spintronics.     

扶手椅型缺陷硫化钼纳米带电子性质的第一性原理计算

基于密度泛函理论的第一性原理计算,研究了含空位缺陷的扶手椅型二硫化钼纳米带的电子性质.发现缺陷会导致纳米带结构稳定性降低,单空位钼缺陷和三空位缺陷使得纳米带从半导体变成金属性,而单空位硫缺陷和两种双空位缺陷仅减小纳米带的带隙;电子态密度和能带的本征态表明缺陷纳米带费米能级附近的杂质态主要是缺陷态的贡献.研究了四类半导体性质的纳米带带隙与宽度的关系,对于完整的纳米带,带隙随宽度以3为周期振荡变化;而引入空位缺陷后,纳米带的带隙振荡不再具有周期且振荡幅度变小.同时发现,当缺陷的浓度变小后,缺陷仅使纳米带的带隙减小,不会使其变为金属性.这些结果有望打开其在新型纳电子器件中的应用潜能.