Dependence on substrate topography of growth of nanosized dendritic structures in an electron-beam-induced deposition process

Nanometer-sized W-dendrites are fabricated on Al₂O₃ substrates with an electron-beam-induced deposition process. Dependence of growth of nanodendrite on surface topography is investigated with transmission electron microscopy. It is confirmed that the nanodendrite grows on convex surfaces but not around a hole on a substrate. These are attributed to different distribution of charges on surfaces with different topographies during electron beam irradiation when charges are produced on the surface due to emission of second electrons. The charges accumulate on convex surface and do not distribute around a hole. Therefore, the nanodendrite grows on the former and not on the latter.     

Periodic surface nanostructures on polycrystalline ZnO induced by femtosecond laser pulses

Periodic surface nanostructures induced by femtosecond laser pulses on polycrystalline ZnO are presented. By translating the sample line-by-line under appropriate irradiation conditions, grating-like nanostructures with an average period of 160 nm are fabricated. The dependence of surface morphologies on the processing parameters, such as laser fluence, pulse number and laser polarization, are studied by scanning electronic microscope (SEM). In addition, photoluminescence (PL) analysis at room-temperature indicates that the PL intensity of the irradiated area increases significantly compared with the un-irradiated area. Using femtosecond laser pulses irradiation to fabricate periodic surface nanostructures on polycrystalline ZnO is efficient, simple and low cost, which shows great potential applications in ZnO-based optoelectronic devices.     

Self-assembled nanostructures via electrospraying

A concentrated nanoparticulate-based ethylene glycol suspension was prepared and electrosprayed at optimum and stable cone-jet mode conditions. Using laser spectroscopy, the droplets were measured and found to range within 0.23–3.8 μm. In parallel to spectroscopy-assisted sizing, a volume equivalence route for estimating droplet sizes was carried out by measuring contact angles and diameters of the deposits. The electrosprayed nanosuspension relics were examined using optical and transmission electron microscopy. These deposits were further characterized using energy-dispersive X-rays and selected area electron diffraction. Simultaneously deposits were formed by a controlled route through needle deposition without the presence of an electric field. The structures formed in this non-electric field driven route are compared with those formed with electric fields. Thus, elucidating electrosprays as a competing nanofabrication route for forming self-assemblies with a wide range of nanomaterials in the nanoscale for top-down based bottom-up assembly of structures.     

Biopolymer-assisted self-assembly of ZnO nanoarchitectures from nanorods

We have investigated three-dimensional (3-D) architectures–microspheres and radial structures–based on biopolymer-assisted self-assembly from one-dimensional ZnO nanorods. The developed method is simple, rapid and cost-effective and can be used for self-assembly of different complex superstructures. A possible model of 3-D architectures self-assembled with biopolymer assistance is presented using minimum energy considerations. Scanning electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy, micro–Raman spectroscopy and cathode luminescence investigations show that the novel 3-D architectures are built from high-purity ZnO nanorods with a wurtzite structure. The resulting radial structures show an intense ultraviolet (UV) cathode luminescence emission suggesting applications as UV light emitting diodes or lasers. Their structural characteristics endow them with a broad area of applications and offer a possibility to be used as fundamental low-dimensional building units. These building units open opportunities for the self-assembly of multifunctional nanostructured systems with applications in bioscience and nanomedicine, electronics and photonics.     

激光准直铬原子束研究

利用多普勒原理对Cr原子束进行横向准直.为了得到好的激光准直效果必须首先把激光的中心频率稳定在偏离Cr原子共振中心频率－5±0.26 MHz的位置上.经过多次的理论与实验得出了优化的实验参量,并且得出如果探测光束与准直光束不平行会造成横向线宽的展宽.根据实验数据选择合适的实验参量,实现利用多普勒原理横向准直Cr原子束,得到准直后Cr原子束的横向发散角为0.48 mrad, 横向温度为265 μK.     

Morphology of alkali halide thin films studied by AFM

Thin layers of alkali halides were investigated by atomic force microscope (AFM). The studied systems were: LiBr/KBr(0 0 1) with −16.7% misfit, LiF/Si(0 0 1) with +4.4% misfit, LiBr/LiF(0 0 1) with +36.8% misfit and NaCl/Si(0 0 1) with +46.5% misfit. The results show that the surface morphology strongly depends on the temperature of layer formation. The alkali halides deposited on the foreign substrate at elevated temperatures or at room temperature and subsequently annealed form preferentially 3D islands leaving uncovered substrate areas between them. It is suggested that Ostwald ripening takes place at elevated temperatures.     

Profile calculation of gold nanostructures by dispersed-nanosphere lithography through oblique etching for LSPR applications

Nanosphere lithography is an inexpensive method used to fabricate gold nanostructures on a substrate. Using dispersed-nanosphere lithography, in which the nanospheres are dispersed on a substrate, 2D or 3D nanostructures can be fabricated by obliquely depositing a gold film on the nanospheres and etching the gold film afterward. These nanostructures are tunable and acute, and are thus good emitting elements for the localized surface plasmon resonance applications. So far, for the fabrication of nanostructures on a substrate with dispersed nanospheres, only 2D nanostructures have been reported through perpendicular etching. We report in this paper that the 3D nanostructures fabricated by dispersed-nanosphere lithography are rigid non-conformal structures, and perpendicular gold etching can be expanded to oblique etching, which provides more possibilities for fabricating the gold nanostructures in various shapes. The profiles of gold nanostructures after several varying angle depositions, and their final profiles after perpendicular or oblique etching, are calculated in this paper. Our profile simulations are applicable for nanospheres (or microspheres) within the range of tens of nanometers to tens of micrometers, and are consistent with our fabricated nanostructures observed using scanning electron and atomic force microscopy. Electronic Supplementary Material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Template synthesis of nanostructured silica with hollow core and mesoporous shell structures

Silica capsules with hollow macroporous core–mesoporous shell (HCMS) were synthesized through template-assisted replication of submicrometer-size polystyrene spheres as templates. The silica mesoporous shell exhibited highly ordered hexagonal structure as confirmed by X-ray diffraction pattern and TEM image. The pore diameter and BET surface area of this sample were found to be 2.1 nm and 1387 m²/g, respectively.     

Recent developments in nanofabrication using scanning near-field optical microscope lithography

In addition to its well-known capabilities in imaging and spectroscopy, scanning near-field optical microscopy (SNOM) has recently shown its great potentials for fabricating various structures at the nanoscale. A variety of SNOM-based fabrication techniques have been developed for different applications. In this paper, the SNOM-based techniques involving three major functions: material modification, addition, and removal, are examined with emphasis on their abilities and reliability to make structures with resolutions at the nanometer level. The principles and procedures underlying each technique are presented, and the differences and uniqueness among them are subsequently discussed. Finally, concluding remarks are provided to summarize the major techniques studied and to recommend the scopes for technology improvement and future research.     

Ferromagnet-superconductor nanocontacts grown by focused electron/ion beam techniques for current-in-plane Andreev Reflection measurements

Superconductor-ferromagnetic in-plane nanocontacts have been created with focused-electron/ion-beam-induced deposition techniques for studies of Andreev Reflection. The final resistance of the nanocontact is tuned during the growth by in situ resistance measurements. The results show that Co nanodeposits grown with focused electron beam have large spin polarization (∼35%), making this nanomaterial of great potential for use in Spin Electronics applications. The experiments have also allowed the determination of the superconducting gap of the W-based nanodeposits grown with focused ion beam.