Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Interaction of metals with an organic semiconductor: Ag and In on PTCDA

The interaction of Ag and In with a thin film of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) was studied by near-edge X-ray absorption fine structure (NEXAFS). Upon Ag deposition on a PTCDA film of 20 nm thickness the relative intensities and lineshapes, as well as the angular dependence of the spectra remains unchanged, illustrating the formation of a chemically unreactive Ag/PTCDA interface. On the other hand, the adsorption of 0.3 nm In strongly decreases the intensity of the π^* resonances in C and O K-edge NEXAFS spectra. This is attributed to a strong charge transfer between In and PTCDA, leading to a redistribution of the charge in the molecule. However, the absence of a strong shift or new features and negligible dependence of peak intensities corresponding to π^* resonances on the In thickness indicate that the interaction between In and PTCDA is not accompanied by a covalent bond formation.     

Methods in carbon K-edge NEXAFS: Experiment and analysis

Near-edge X-ray absorption spectroscopy (NEXAFS) is widely used to probe the chemistry and structure of surface layers. Moreover, using ultra-high brilliance polarised synchrotron light sources, it is possible to determine the molecular alignment of ultra-thin surface films. However, the quantitative analysis of NEXAFS data is complicated by many experimental factors and, historically, the essential methods of calibration, normalisation and artefact removal are presented in the literature in a somewhat fragmented manner, thus hindering their integrated implementation as well as their further development. This paper outlines a unified, systematic approach to the collection and quantitative analysis of NEXAFS data with a particular focus upon carbon K-edge spectra. As a consequence, we show that current methods neglect several important aspects of the data analysis process, which we address with a combination of novel and adapted techniques. We discuss multiple approaches in solving the issues commonly encountered in the analysis of NEXAFS data, revealing the inherent assumptions of each approach and providing guidelines for assessing their appropriateness in a broad range of experimental situations.     

C K‐edge NEXAFS study of fluorocarbon formation on carbon anodes in molten NaF–AlF3–CaF2

Operational instability from processes occurring at the anode during the production of aluminum in the commercial Hall‐Héroult process may lead to an increase in undesirable fluorocarbon emissions, higher energy use, and shorter plant life. One contribution to this instability may be the possible formation of a fluorocarbon film at the electrode interface. Here, the surface composition of graphite anodes after electrolysis in molten NaF–AlF₃–CaF₂ at 990 °C is investigated for evidence of fluorocarbon formation using C K‐edge near edge X‐ray absorption fine structure. Fluorocarbon is identified on an anode surface after prolonged anode effect (very high overpotential with increased cell resistance) and also on an anode surface after normal electrolysis without anode effect. This provides evidence that fluorocarbon formation may occur prior to anode effect lowering the surface tension of the anode and therefore resulting in dewetting to contribute to the onset of the anode effect. Confirmation that such compounds form furthers our understanding of electrochemical reactions of graphite with fluoride and of the fundamental processes that occur in an aluminum smelter cell. Copyright © 2013 John Wiley & Sons, Ltd.     

X-ray absorption spectroscopy study and photocatalyst application of CuO and Cu0.9Ti0.1O nanoparticles

We report detailed investigations on the electronic structure and photocatalyst application of CuO and Cu_0.9Ti_0.1O nanoparticles (NPs). The NPs were prepared by co-precipitation method and subsequent annealing. Crystal structure and morphology of the NPs were investigated by synchrotron X-ray diffraction and high resolution transmission electron microscope, respectively. The local atomic structure around the Cu atoms was investigated by the extended X-ray absorption fine structure (EXAFS) at the Cu K-edge. Electronic structure determination was done using near edge X-ray absorption fine structure (NEXAFS) at the O K-edge, Cu L-edge, Cu K-edge and Ti L-edge. From the structural and electronic structure investigations, it is inferred that the Ti substitutes the Cu in CuO lattice without forming any secondary phases and the valence state of Cu is not affected by the Ti substitution; however the Cu – O bond length is found to be shorten in the Ti doped sample. As prepared NPs exhibit excellent photocatalyst application toward the degradation of methyl orange (MO) and potassium dichromate (PD) pollutant dyes under the visible light irradiation. The mechanism of the photodegradation of MO and PD pollutants, by the smaller sized CuO and larger sized Cu_0.9Ti_0.1O NPs, is briefly discussed.     

Asymmetric local displacements in the Bi2Sr2CaCu2O8+β superconductor

Instantaneous in-plane Cu-O bond distribution in the Bi₂Sr₂CaCu₂O_8+β (Bi2212) superconductor has been investigated by high k-resolution Cu K-edge extended X-ray absorption fine structure (EXAFS) measured with polarized vector parallel to the two orthogonal Cu-O-Cu bonds of the CuO₂ square plane. The results show an anisotropic Cu-O distribution in the two directions and provide further information on the local atomic displacements in the lattice-charge stripes. Received 5 June 2000     

Copper and copper oxide nanoparticles in a cellulose support studied using anomalous small-angle X-ray scattering

Microcrystalline cellulose is a porous natural material which can be used both as a support for nanoparticles and as a reducer of metal ions. Cellulose supported nanoparticles can act as catalysts in many reactions. Cu, CuO, and Cu₂O particles were prepared in microcrystalline cellulose by adding a solution of copper salt to the insoluble cellulose matrix and by reducing the copper ions with several reducers. The porous nanocomposites were studied using anomalous small angle X-ray scattering (ASAXS), X-ray absorption spectroscopy, and X-ray diffraction. Reduction of Cu²⁺ with cellulose in ammonium hydrate medium yielded crystalline CuO nanoparticles and the crystallite size was about 6–20 nm irrespective of the copper concentration. The size distribution of the CuO particles was determined with ASAXS measurements and coincided with the crystallite sizes. Using sodium borohydrate or hydrazine sulfate as a reducer both metallic Cu and Cu₂O nanoparticles were obtained and the crystallite size and the oxidation state depended on the amount of reducer.     

Structure and properties of 1,4-benzenedimethanethiol films grown from solution on Au(1 1 1): An XPS and NEXAFS study

Core level photoemission and X-ray absorption at the carbon C 1s edge are applied to the study of chemisorption of 1,4-benzenedimethanethiol molecules on Au(1 1 1) and to investigate the effect of the solvent used to prepare the organic films. 1,4-Benzenedimethanethiol films were prepared in polar and non-polar solvents, i.e. ethanol, methanol and n-hexane. 1,4-Benzenedimethanethiol molecules are anchored to the substrate through a single S-Au bond; the molecules in the films tend to assume an upright orientation, the aromatic ring resulting tilted towards the direction perpendicular to the substrate plane. The films present an effective thickness corresponding to more than a single layer. Only small differences are observed among behaviours in different solvents. It is concluded that the final properties and conformation of the 1,4-benzenedimethanethiol films are largely determined by the reciprocal interactions between the molecules and with the substrate.     

Adsorption and structure of methyl mercaptoacetate on Cu(1 1 1) surface by XPS and NEXAFS spectroscopy

Methyl mercaptoacetate (MA) on Cu(1 1 1) surface was investigated using synchrotron radiation-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. MA adsorbs on the surface via thiolate formation and weak interaction of the carbonyl group with the surface. Two different adsorption states previously reported for methanethiolate and ethanethiolate were confirmed, besides atomic sulfur. NEXAFS measurements support gauche-type conformation of MA whose skeleton lies on the surface.