Influence of the heating rate on the temperature profiles and on the conversion rate of powdery cellulose and pine sawdust

An experimental study of the thermal decomposition of powdered cellulose and pine sawdust has been performed. The influence of the heating rate on the temperature profiles in the sample and on the solid conversion rate has been studied. A mathematical model without adjustable parameters has been used to calculate the temperature at different points in the solid bed and the average total solid conversion. The experimental results have been compared with those calculated by the model. A good agreement has been obtained for sawdust. Some differences are observed for cellulose at high heating rates, and the influence of the thermal conductivity and the reaction heat on the results has been analysed.     

Utilization of Pine Nut Shell derived carbon as an efficient alternate for the sequestration of phthalates from aqueous system

This study highlights the importance of a cheap bio waste; Pine Nut Shell (PNS), from which a carbon is synthesized that can efficiently remove toxic phthalates from an aqueous system. PNS derived carbon shows high affinity toward phthalates in descending order along with adsorption capacity i.e., dibutyl phthalate (DBP) 5.65 mg/g > diallyl phthalate (DAP) 3.64 mg/g > diethyl phthalate (DEP) and 2.87 mg/g > dimethyl phthalate (DMP) 2.48 mg/g. Different characterization techniques such as FTIR, elemental analysis, point of zero electric charge (PZC), SEM, EDX and BET were employed to investigate the binding sites and surface area of the adsorbent. Adsorption experiments were performed both in batch and column modes. Equilibrium studies showed that the Langmuir isotherm fits best to experimental data. Kinetically, adsorption phenomena obeyed pseudo second order. Furthermore, thermodynamic results expressed the exothermic nature of adsorption on the basis of negative value of enthalpy change. Column sorption method was also adapted to check the feasibility of the adsorption process through the investigation of flow rate, breakthrough curve and pre-concentration factor which is found to be 13 for DMP and DEP and 16 for DAP and DBP. Methanol was found to be best solvent for the recovery of phthalates. Application in real water samples also showed good efficiency of PNS derived carbon for the removal of phthalates.     

Optimization of a New Extraction Technique for Analysis of Verbenone and cis-Verbenol in Pine Seeds

Results from a systematic study of the factors affecting extraction of cis-verbenol and verbenone from pine seeds are presented. Five extraction conditions were investigated: extraction solvent, method of extraction, extraction temperature, volume of solvent, and the ratio of the mass of sample to the amount of extraction solvent. The resulting optimized method uses magnetic-stirring-assisted extraction of pine seeds (5 g) with ethyl acetate (75 mL) for 20 min, at room temperature. RSDs were less than 5% for both compounds. GC–FID was used for quantification of cis-verbenol and verbenone in the extracts.     

A NOVEL METHOD OF FITTING SPATIO‐TEMPORAL MODELS TO DATA,WITH APPLICATIONS TO THE DYNAMICS OF MOUNTAIN PINE BEETLES

Abstract We develop a modular landscape model for the mountain pine beetle (Dendroctonus ponderosae Hopkins) infestation of a stage‐structured forest of lodgepole pine (Pinus contorta Douglas). Beetle attack dynamics are modeled using response functions and beetle movement using dispersal kernels. This modeling technique yields four model candidates. These models allow discrimination between four broad possibilities at the landscape scale: whether or not beetles are subject to an Allee effect at the landscape scale and whether or not host selection is random or directed. We fit the models with aerial damage survey data to the Sawtooth National Recreation Area using estimating functions, which allows for more rapid and complete parameter determination. We then introduce a novel model selection procedure based on facial recognition technology to compliment traditional nonspatial selection metrics. Together with these we are able to select a best model and draw inferences regarding the behavior of the beetle in outbreak conditions.     

Characterization of the materials used in Chinese ink sticks by pyrolysis-gas chromatography–mass spectrometry

Chinese ink stick has a long history and a special importance in Chinese culture. Its main components are soot (normally pine wood soot and lamp soot) and animal glue; however, additives were added from time to time for different purposes. In order to see whether the two types of soot can be differentiated and the other constituents in Chinese ink sticks can be identified or not by Pyrolysis-Gas Chromatography-Mass Spectrometry (Py-GC-MS) and GC-MS techniques, an initial study has been carried out. The main polycyclic aromatic hydrocarbons (PAHs) in soot could be identified, which are anthracene, fluoranthene, triphenylene and benz[e]acephenanthrylene. The main difference between those two types of soot is that the detectable amount of PAHs in lamp soot is much lower than in pine wood soot. In addition to this, the relative concentration of the main polycyclic aromatic hydrocarbons including anthracene, fluoranthene, pyrene, triphenylene and its isomer, benzo[k]fluoranthene and its isomers are different in the two types of soot. The relative content of benzo[k]fluoranthene is higher in pine soot than in lamp soot, which could be used to as a criterion to differentiate the two types of soot. Py-GC-MS technique is a very effective method to identify the main components of Chinese ink sticks, including the PAHs of soot, binding media and the additives of camphor and borneol in one analysis.     

Copper,nickel, and vanadium in the Western Galician Shelf in early spring after the <Emphasis Type="Italic">Prestige</Emphasis> catastrophe: is there seawater contamination?

A simple and efficient extraction method based on acidic leaching has been developed for measurement of methylmercury (MeHg) in benthic organisms and plant material. Methylmercury was measured by speciated isotope-dilution mass spectrometry (SIDMS), using gas chromatography interfaced with inductively coupled plasma mass spectrometry (GC–ICP–MS). Reagent concentration and digestion temperature were optimized for several alkaline and acidic extractants. Recovery was evaluated by addition of MeHg enriched with CH₃²⁰¹Hg⁺. Certified reference materials (CRM) were used to evaluate the efficiency of the procedure. The final digestion method used 5 mL of 4 mol L^–1 HNO₃ at 55°C to leach MeHg from tissue and plant material. The digest was further processed by aqueous phase ethylation, without interference with the ethylation step, resulting in 96±7% recovery of CH₃²⁰¹Hg⁺ from oyster tissue and 93±7% from pine needles. Methylmercury was stable in this solution for at least 1 week and measured concentrations of MeHg in CRM were statistically not different from certified values. The method was applied to real samples of benthic invertebrates and inter-laboratory comparisons were conducted using lyophilized zooplankton, chironomidae, and notonectidae samples.Contribution No. 15 of the Mercury Experiment to Assess Atmospheric Loadings in Canada and the US (METAALICUS).     

Ultrasonics as a tool for development of pine-needle extract loaded bee wax edible packaging for value addition of Himalayan cheese

In the present study, Himalayan cheese, kradi was coated with beeswax loaded with pine needle extract (PNE) to increase its shelf life and nutraceutical potential. PNE was extracted via ultrasonication and incorporated into beeswax at concentrations, 2:1, 1:1, and 2:3 (grams of beeswax to mL of PNE). The dispersion of PNE in the coatings was carried out using an ultrasonic probe at a frequency of 20 kHz for 15 min and at power rating of 500 W. The coatings were characterised using scanning electron microscopy, light microscopy, dynamic light scattering (DLS), fourier transmission infrared spectroscopy. DLS revealed a hydrodynamic diameter and zeta potential of 12.11 ± 0.41 µm and −19.32 ± 0.61 mV for coating loaded with highest concentration of PNE. The bioactivities of the coating including antioxidant, antidiabetic and antibacterial assays revealed significantly higher values with the increase in PNE concentration. Shelf life and sensory evaluation study including microbiological and sensory analysis revealed inhibition of mould growth and good score of texture and appearance with the increase in concentration of PNE. The study provides a future perspective for application of beeswax loaded PNE coatings in cheese industry.     

Py-GC/MS, GC/MS and FTIR investigations on LATE Roman-Egyptian adhesives from opus sectile: New insights into ancient recipes and technologies

An analytical protocol based on optical microscopy, Fourier transforms infrared spectroscopy (FTIR), analytical pyrolysis in the presence of hexamethyldisilazane followed by gas chromatographic/mass spectrometric analysis (Py-GC/MS) and gas chromatography/mass spectrometry after alkaline hydrolysis, solvent extraction and trimethylsilylation (GC/MS) was used in the chemical characterisation of the original adhesives used to fix monochrome and mosaic glass and stone plaques coming from the Late Roman archaeological site of Antinoopolis (Egypt).FTIR analysis demonstrated the presence of calcite fragments, and Py-GC/MS and GC/MS analyses provided detailed molecular compositions, highlighting the presence of a wide range of compound classes including diterpenoid acids, tricyclic abietanes with a high degree of aromatisation, mid- and long-chain monocarboxylic fatty acids, mono- and di-hydroxy acids, α,ω-dicaboxylic fatty acids, n-alkanols, and n-alkanes. Characteristic biomarkers and their distribution patterns indicated the presence of pine pitch in all the adhesives, which in some cases was admixed with beeswax and brassicaceae seed oil.The results provided new insights into the complex recipes used by artisans in ancient Egypt in the production of adhesives and in the sophisticated manufacture of opus sectile decorations.     

石墨炉原子吸收光谱法测定保健品松花粉中痕量铅

实验通过采用优级纯以上试剂降低本底,多道程序清洗器皿控制污染,通过控制酸量改善测定铅的信噪比,降低检出限,引入基体改进剂磷酸二氢铵消除基体干扰.优化石墨炉检测条件下,松花粉样品中铅的加入平均回收率达到90％以上.使用标准物质(茶叶GBW10016)对该方法进行了验证,结果表明铅的测定值在标准物质的保证值范围内.该方法能...