Preparation and characterization of C16 monolithic columns for capillary electrochromatography

A series of methacrylamide-based C16 monolithic columns were prepared and characterized to determine how their porous structural properties and chromatographic behavior are affected by the percentages of functional monomer, base monomer, and cross-linker in the polymerization solution. Baseline separation of 6 neutral compounds can be readily obtained in an optimized column. Furthermore, the effects of organic additive in the mobile phase, operating voltages, and temperature on retention behaviors and separation efficiencies were also studied. The separation mechanism is also discussed. High column efficiency and good reproducibility indicate that the monolithic columns hold considerable promise.     

苯乙烯-马来酸酐共聚物的核磁共振分析

利用^1H NMR、^13C NMR及DEPT(无畸变极化转移增强)核磁共振技术研究了苯乙烯-马来酸酐共聚物(SMA)的序列结构和组成，并比较了几种核磁共振实验技术对分析SMA结果的准确性；实验表明^1H NMR是分析组成的简单、快速而有效的方法，DEPT谱进行序列结构计算准确度较高。     

单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

电子亲和势法判断负离子聚合单体的活性

提出了利用不同取代基烯类单体的电子亲和势来判断其负离子聚合反应活性的方法.采用密度泛函理论的B3LYP/6-31G(d)方法优化了不同取代基烯类单体几何构型,在B3LYP/6-311++G(3df,2p)水平上计算了其电子亲和势.通过电子亲和势计算值与文献报道实验数据比较,表明本文采用的计算方法是比较可靠的.结合不同取代基烯类单体的电子亲和势的计算结果,通过与Q-e关系及取代基常数σ数据进行比较表明,电子亲和势可以用来判断不同单体负离子聚合反应的活性高低.     

一种新型单体引发转移终止剂合成精细结构功能化的聚苯乙烯

自从1982年Ｏｔｓｕ[1]等提出引发转移终止剂(Ｉｎｉｆｅｒｔｅｒ)以来,这类化合物得到了广泛的研究和发展.使用引发转移终止剂的聚合反应是实现“活性”聚合的一个重要方法.引发转移终止剂又分为热引发转移终止剂和光引发转移终止剂两种.热引发转移终止剂除了三苯甲基偶氮苯外[2],均是六取代乙烷类化合物[3～7];而光引发转移终止剂则一般是一些含二硫代氨基甲酰氧基基团的化合物,如Ｎ,Ｎ二乙基二硫代氨基甲酸苄酯(ＢＤＣ)、双(Ｎ,Ｎ二乙基二硫代氨基甲酸)对苯二甲酯(ＸＤＣ)、Ｎ乙基二硫代氨基甲酸苄酯(ＢＥＤＣ)、双(Ｎ乙基二硫代氨基甲酸…     

Diorganomorpholinometallane von Gallium und Indium – Monomer‐Dimer‐Gleichgewichte in Lösung

Diorganomorpholinometalates of Gallium and Indium – Monomer‐Dimer‐Equilibrium in Solution The reaction of Li[N(CH₂CH₂)₂O] (LiMorpholinate; Li(Morph)) with Me₂GaCl and Me₂InCl gives by salt‐elimination the diorganoamidometalates Me₂M(Morph) ( M = Ga: 1 ; M = In: 2 ), respectively. 1 and 2 were characterized by NMR and vibrational spectroscopy as well as by X‐ray structure determinations. According to this, centrosymmetrical dimers are present in the solid state while a monomer‐dimer equilibrium was assumed for the THF‐solution. Cryoscopic molecular weight determinations confirmed our assumptions.     

Sterically and electrosterically stabilized emulsion polymerization. Kinetics and preparation

The principal subject discussed in the current paper is the radical polymerization in the aqueous emulsions of unsaturated monomers (styrene, alkyl (meth)acrylates, etc.) stabilized by non-ionic and ionic/non-ionic emulsifiers. The sterically and electrosterically stabilized emulsion polymerization is a classical method which allows to prepare polymer lattices with large particles and a narrow particle size distribution. In spite of the similarities between electrostatically and sterically stabilized emulsion polymerizations, there are large differences in the polymerization rate, particle size and nucleation mode due to varying solubility of emulsifiers in oil and water phases, micelle sizes and thickness of the interfacial layer at the particle surface. The well-known Smith-Ewart theory mostly applicable for ionic emulsifier, predicts that the number of particles nucleated is proportional to the concentration of emulsifier up to 0.6. The thin interfacial layer at the particle surface, the large surface area of relatively small polymer particles and high stability of small particles lead to rapid polymerization. In the sterically stabilized emulsion polymerization the reaction order is significantly above 0.6. This was ascribed to limited flocculation of polymer particles at low concentration of emulsifier, due to preferential location of emulsifier in the monomer phase. Polymerization in the large particles deviates from the zero-one approach but the pseudo-bulk kinetics can be operative. The thick interfacial layer can act as a barrier for entering radicals due to which the radical entry efficiency and also the rate of polymerization are depressed. The high oil-solubility of non-ionic emulsifier decreases the initial micellar amount of emulsifier available for particle nucleation, which induces non-stationary state polymerization. The continuous release of emulsifier from the monomer phase and dismantling of the non-micellar aggregates maintained a high level of free emulsifier for additional nucleation. In the mixed ionic/non-ionic emulsifiers, the released non-ionic emulsifier can displace the ionic emulsifier at the particle surface, which then takes part in additional nucleation. The non-stationary state polymerization can be induced by the addition of a small amount of ionic emulsifier or the incorporation of ionic groups onto the particle surface. Considering the ionic sites as no-adsorption sites, the equilibrium adsorption layer can be thought of as consisting of a uniform coverage with holes. The de-organization of the interfacial layer can be increased by interparticle interaction via extended PEO chains--a bridging flocculation mechanism. The low overall activation energy for the sterically stabilized emulsion polymerization resulted from a decreased barrier for entering radicals at high temperature and increased particle flocculation.     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.     

The Photochemistry of Ch3I in Various Matrices at Low Temperature

The photodissociation of methyl iodide in various matrices at low temperature was studied. The observed Raman spectra excited by 514.5 nm laser radiation showed that there were two different photolytically produced iodine species isolated in the matrices after illumination by a medium pressure mercury lamp. One species which was dominant at lower iodine concentrations and exhibited a progression with an ωe of 201 cm^?1, belonged to the matrix isolated iodine monomer (I₂). The other species, which was dominant at higher iodine concentrations with an ω_e of approximately 180 cm^?1, belonged to the iodine aggregate ((I₂)_n). Five progressions of resonance Raman or resonance fluorescence of these two species were also observed in the other matrices. The iodine aggregate in the methyl iodide matrix at 77 K was formed in a crystalline structure, while the photolytically generated iodine aggregate from CH₃I/Ar (2/3) matrix at 10 K, after illumination with a mercury lamp, was in amorphous form. The rearrangement of photolytically produced iodine aggregate in methyl iodide matrix was observed as a function of the duration of illumination. Local heating effects of the laser radiation might induce the iodine monomer to aggregate in matrices. The photodissociation mechanism of methyl iodide in matrices is also proposed.