Phonon structure and dynamics of boron nitride single wall nanotube

We report a detailed study of the phonon properties of hexagonal boron nitride (BN) monolayers as well as nanotubes by using De Launay type of angular force model. The force constants used for calculation of phonon dispersion relations of the nanotube are derived from those for the monolayers of hexagonal by employing force constant method. These force constants have been modified to include the effect of curvature of the tubule. The results are then used to derive the phonon dispersion relations for (10,10) BN nanotubes using ‘zone-folding’ method. Calculated phonon modes are in good agreement with the experimental values obtained so far, for (10,10) armchair BN nanotubes.     

Comparative kinetics of phospholipase A2 action on liposomes and monolayers of phosphatidylcholine spread at the air-water interface

A detailed kinetic model describing the surface transformation of spread liposomes along with their enzymatic hydrolysis was developed. The model was applied to the hydrolysis of the long-chain phosphatidylcholine generating reaction products which remain at the interface and to medium-chain substrates from which the products desorb rapidly into the bulk phase. The overall kinetic constants of the hydrolysis in liposomal systems were compared with those obtained with monolayers under barostatic conditions. The values of the interfacial Michaelis-Menten constant were estimated.     

Magnetism of metal cyanide networks assembled at interfaces

Studies of metal cyanide thin films prepared directly at interfaces are reviewed. The systems range from monolayers, single-layer analogs of Prussian blue-like networks, to bulk powders prepared as thin films. Monolayer networks are prepared at the air/water interface and transferred to solid supports using Langmuir-Blodgett film methods. Films of bulk materials are prepared directly on solid surfaces using a templated sequential deposition procedure. The magnetic properties of the films have been explored, and in some cases, these monolayers and surface films give rise to new behavior that is only possible because of the fabrication method or thin film architecture. The methods of synthesis can generate oriented samples, even when the materials are poorly crystalline. Furthermore, the interface-assembled networks are inherently anisotropic, leading to phenomena not present in the solid-state analogs, such as anisotropic photomagnetism in a thin film of Rb_jCo_k[Fe(CN)₆]_l·nH₂O.     

Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.     

Monolayers of hydrogen-bonded polymer blends at the air–water interface: poly(vinylacetate)+poly (4-hydroxystyrene)

 The surface pressure (Π) vs surface concentration (Γ_s) curves of the hydrogen-bonded polymer blend poly(vinylacetate)+ poly(4-hydro-xystyrene) (PVAc+P4HS) have been measured at 25 °C onto a water subphase at pH=2.0. While PVAc forms extended monolayers, and the free surface of water is found to be a good solvent for it, P4HS forms compressed monolayers, and the surface is a near Θ-type solvent for it. PVAc and P4HS form miscible non-ideal monolayers until near the collapse pressure through the whole concentration range. The composition dependence of the Π–Γ_s curves is rather complex. Contrary to what might be expected, the addition of PVAc to the blend does not reduce the rigidity of the monolayer until its weight fraction is larger than 0.5. The compressibility data of the P4HS-rich monolayers suggest the existence of a second maximum at high surface coverages, a result already observed in some polysiloxanes. Received: 11 March 1998 Accepted: 7 May 1998     

Enzymatic hydrolysis reaction of phospholipids in monolayers

The hydrolysis reaction of , and , -dipalmitoylphosphatidylcholine (DPPC) catalized by bee venom phospholipase A₂ was studied in spreading monolayer at the water/air interface. DPPC and the hydrolysis products, palmitic acid and -lysophosphatidylcholine, palmitoyl were characterized at the interface by means of surface pressure, surface potential and ellipsometric measurements. Furthermore, mixed monolayers of reagents and products were investigated to ascertain their miscibility. The results show that the hydrolysis reaction can be followed by the decrease of surface pressure with time on subphases containing β-cyclodextrin, a well-known complexing agent of many amphiphilic compounds. The order of the reaction, the kinetic constant and other kinetic parameters are deduced.     

Molecular pair potential of chiral amino acid amphiphile in Langmuir monolayers on the basis of an atomistic model

In the present work, the pair potential of enantiomeric N-palmitoyl aspartic acid amphiphile monolayer at the air/water interface is calculated based on an atomistic model. The molecular structure and partial charges are calculated using two semi empirical (PM3, AM1) and one empirical (Gasteiger and Marcili) methods. A distance-dependent dielectric function is used to represent the interfacial dielectric constant at the aqueous subphase. The present study indicates that a pair of molecules have favorable interaction at specific ranges of mutual orientations. Other orientations are favorable but at larger separations. Favorable electrostatic interaction at a specific combination of orientation and short separations of the head groups significantly contribute to the total energy. The curvature of the domain boundary is suggested to be driven by the favorable arrangement which is dependent on the pair potential of molecules. The use of charges obtained by the PM3 and GM do not lead to a significant variation of the orientation-dependent features, while the AM1 predicts higher partial charges and interactions are stronger than the former two methods. However, orientation-dependent features remain the same. The variations in the LJ parameters and charges indicate that the conclusions made are insensitive to the choice of parameters. The mutual favorable interaction predicted by calculation agree with the handedness of curvature of domains.     

Properties of monolayers of crown ethers bearing an azo and azoxy group in the macrocycle

Two methods are described for preparing monomolecular layers of crown ethers with an azo or azoxy group in the macrocycle. When the molecules used to build the monolayer are soluble in aqueous solutions, adsorptive preconcentration on mercury electrodes was used to prepare the monolayer coating. The monolayer was electroactive due to the presence of the azo or azoxy unit in the molecules. Monolayers of crown ethers bearing an azo group in the macrocycle were shown to recognize alkali metal cations present in the solution. Changes of the parameters of the voltammetric reduction peaks - peak potential and peak width, served as an indication of specific interactions of the monolayer of 13-membered and 16-membered azocrown ethers with Na⁺ and K⁺ cations, respectively.The monolayers capable of recognizing cations have also been prepared on the aqueous solution-air interface, using the Langmuir technique. In this approach, amphiphilic derivatives of the azocrowns were synthesized and the monolayer has been assembled on the subphase containing metal cations. Binding of the cation by the macrocycle has a stabilizing effect on the monolayer and higher collapse pressures are achieved than on the pure water subphase. The monolayer was transferred from the air-water interface on the solid substrate using the Langmuir-Blodgett technique. Thin mercury film electrodes on the Ag substrate, or An films evaporated on glass slides were employed as the electrode substrates. The former gave monolayer modified electrodes of higher stability.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Thermodynamic and spectroscopic properties of mixtures of β-lactoglobulin and dioleylphosphatidylcholine

 The behavior of the single spreading monolayers of β-lacto-globulin (β-LG) and dioleyl-phosphatidylcholine (DOPC), as well as their mixtures, has been studied on subphases containing Na⁺ or Ca⁺⁺ ions. The results show an influence of temperature and subphase on the studied systems. The behavior of the areas as a function of the weight fraction of the two components shows significative and prevalently positive deviations from the additivity and their bidimensional miscibility. The variation of ΔG ^ex, ΔH ^ex and ΔS ^ex calculated for the DOPC–β-LG mixture having maximum deviation on two different supports allows to deduce that the interactions are prevalently repulsive. FTIR–ATR spectra of transferred plurilayers show that DOPC has a surface orientation which can originate the miscibility between the protein and DOPC. Received: 3 February 1997 Accepted: 3 June 1997     

Synthesis of Calix[4]arene Derivatives Containing a Nucleobase and their Interaction with Complementary Nucleosides at the Air–Water Interface

Amphiphilic calix[4]arene derivatives with a nucleobase on the lower rim have been synthesized in good yields by the condensation of calix[4]arenediamine {5,11,17,23-tetra-tert-butyl-25,27-bis(2-aminoethoxy)-26,28-dihydroxycalix[4]arene} with uracilo-N-acetic acid, thymino-N-acetic acid and adenino-N-propionic acid in the presence of CDI in DMF. Monolayers of the amphiphilic calix[4]arene-nucleobase derivatives on the surface of pure water, the aqueous subphases containing complementary nucleosides, were studied by film balance measurement and relaxation experiments. LB films deposited from all subphases were investigated by UV spectra and FT-IR spectroscopy. All the results indicate that the interaction between the nucleobases in the headgroup of amphiphilic p-tert-butylcalix[4]arene derivatives and the complementary nucleosides in the subphase takes place through multiple hydrogen bonding and the nucleosides can be transferred to solid substrates along with their monolayers.