基于校园网的实验管理系统的设计

主要讨论了应用实验室管理系统的必要性,并从用户需求分析、系统总体设计、功能模块的设计等方面对B/S实验室管理系统的开发进行了详细的阐述。     

Mathematical Modeling, Control, Computer Simulation and Laboratory Experiments of a Spatial Servopneumatic Parallel Robot

In this paper, the special construction of a parallel robot, called spatial servopneumatic multi-axis test facility, will be discussed. The investigations include the following aspects: (i) the laboratory set-up of the robot, (ii) various results obtained in laboratory experiments, taking into account quite different control algorithms and command-input signals, (iii) a comparison of the laboratory experiments with the computer simulations of Part I of this paper, and ({vi}) a quality check of the results compared with the cost of the different controller realizations. The results of both the computer simulations and the laboratory experiments show: (i) The dynamic behavior of the parallel structure can be tremendously improved by using sophisticated nonlinear control algorithms. (ii) This improvement has to be paid by a drastically increased amount of work for deriving the model equations and control algorithms, and by augmented hardware cost of the sensing elements and controller electronics. (iii) Carefully developed model equations and identified model parameters provide theoretical models of the complex parallel structure that are very close to reality. This enables the design engineer to systematically investigate constructive alternatives of the design parameters, sensor and actuator concepts, and control strategies of the MAP prior to their hardware realization.This work has been supported by the German Science Foundation (DFG) under Contract No. Ha 1666/6-3.     

Development of the mechanics of underground and special structures in Kazakhstan over the last 40 years

Some results on underground structures obtained by Kazakh mechanicians are reviewed. The review covers a period of the last forty years. Also results on the mechanics of special objects are discussed.Translated from Prikladnaya Mekhanika, Vol. 40, No. 10, pp. 3–36, October 2004.     

Implementation of an integrated glucose POCT system

In response to a change of the Belgian National Directives whereby hospital laboratories became responsible for all point-of-care testing (POCT) performed within hospital walls a standardized and automated POC glucose-testing system was implemented in our hospital. The system consists of 50 AccuCheck Inform instruments (Roche Diagnostics, Vilvoorde, Belgium), 50 docking stations, a DataCare Server, and connections to the medical laboratory information system (MOLIS, Sysmex, Barchon, Belgium) and to the hospital information system. Implementation involved many parties and extensive preparation and communication. Key issues were bar-coded patient and user identification, training, and responsibilities. One year after the hospital wide implementation of this system the quality of POC glucose testing has significantly increased, thereby improving patient safety. This study describes a stepwise change over involving the medical laboratory and with a focus on hands-on quality.Presented at the ninth conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.     

Time saving fluid dynamic predictions in a wetting-drying process: A hypothesis for vertisols

This paper is aimed at investigating the effect of the initial water content in a vertisol sample on the whole wetting-drying process leading the system to a change in volume. In order to do this, an experimental setup was realized and employed with very thin soil layers wetted from below (“per ascensum”). The results show that the effect of the initial water content on the swelling-shrinkage process is to shift the corresponding curve e-ϑ towards bigger-smaller values of the humidity but does not seem to affect the dynamics of the process. The text was submitted by the authors in English.     

Strategies for multi-site GLP studies

 A GLP study can be performed at more than one site. This is called a multi-site study. Although, the study is performed at different sites, it is still one study and must completely comply with the GLP principles. The fact that different activities are conducted at different sites implies that the planning, the organization and the communication are crucial for the success of the study. This means that all the staff involved should know their responsibilities and should have the knowledge and skills to realize all the phases of the study according to the GLP principles. To achieve a well managed multi-site study, several strategies for setting up such a study can be followed. This paper focuses on the responsibilities, communication, and collaboration of the personnel, which are involved in a multi-site study. Several case studies are highlighted, and we concluded that the basic communication triangle in a single-site GLP study between test facility management, study director, and the quality assurance unit should be extended to the communication among test facility and test site management, study director, principle investigator(s), and the quality assurance units at the test sites. Introduction Received: 14 August 2002 Accepted: 26 November 2002     

光谱实验室的建设和管理

阐述冶金、铸造等行业用于金属成分分析的直读发射光谱仪实验室的建设和管理。从仪器的调研、选型，实验室选址，基础设施设备的准备，仪器的安装、调试、验收、日常分析，实验室管理等几个方面，分别作了介绍。     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Is it safe to have a laboratory test?

A recent US Institute of Medicine report indicated that up to 98,000 deaths and more than 1 million injuries occur each year in the United States due to medical errors. These include diagnostic errors, such as an error or delay in diagnosis, failure to employ indicated tests and the use of outmoded tests. Laboratory tests provide up to 80% of the information used by physicians to make important medical decisions, therefore it is important to determine how often laboratory testing mistakes occur, whether they cause patient harm, where they are most likely to occur in the testing process, and how to prevent them from occurring. A review of the literature and a US Quality Institute Conference in 2003 indicates that errors in laboratory medicine occur most often in the pre-analytical and post-analytical steps in the testing process, but most of the quality improvement efforts focus on improving the analytical process. Measures must be developed and employed to reduce the potential for mistakes in laboratory medicine, including better indicators for the quality of laboratory service. Users of laboratory services must be linked with the laboratorys information system to assist them with decisions about test ordering, patient preparation, and test interpretation. Quality assessment efforts need to be expanded beyond external quality assessment programs to encompass the detection of non-analytical mistakes and improving communication between the users of and providers of laboratory services. The actual number of mistakes in laboratory testing is not fully recognized, because no widespread process is in place to either determine how often mistakes occur or to systematically eliminate sources of error. We also tend to focus on mistakes that result in adverse events, not the near misses that cause no observable harm. The users of laboratory services must become aware of where testing mistakes can occur and actively participate in designing processes to prevent mistakes. Most importantly, healthcare institutions need to adopt a culture of safety, which is implemented at all levels of the organization. This includes establishing closer links between providers of laboratory services and others in the healthcare delivery system. This was the theme of a 2003 Quality Institute Conference aimed at making the laboratory a key partner in patient safety. Plans to create a permanent public–private partnership, called the Institute for Quality in Laboratory Medicine, whose mission is to promote improvements in the use of laboratory tests and laboratory services are underway.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.     

“In situ” radiation cleaning of underground water contaminated with cyanides - six years of experience

The locality of underground water, contaminated with cyanides, has been successfully cleaned by using the hydraulic barrier method (assembly of pumped wells) since 1986. The average cyanide concentrations in the outflow exceeded 35 m per litre. Contamination had to be eliminated before the discharge into the sewer system. The radiation approach “in situ” i.e. decomposition of cyanides by barrier, was applied and is still being used today. The cyanide concentration was lowered more than one order of magnitude. This process was approved by the Czechoslovak radiation security authorities and further applications of “in Situ” regeneration of underground water contamination is anticipated.